Mature trees and shrubs definition

Mature trees and shrubs means “significant trees” as defined in this chapter and/or native shrubs, ferns and forbs established at a density that provides a predominantly continuous covervegetation with well-established root systems that provide a predominantly continuous cover.
Mature trees and shrubs means vegetation, with well-established root systems, that provides a predominantly continuous cover.

Examples of Mature trees and shrubs in a sentence

  • Mature trees and shrubs greater than twelve (12) feet in height and/or width shall be replaced with trees or shrubs at or near twelve (12) feet in height and/or width.

  • Special cases and sampling methodologyIn several cases extrapolated data are necessary, because the measurement of seed/spore production is more complicated, often with more time exposure:● Tussock grasses: These produce a lot of tillers with inflorescences - use method 2.● Mature trees and shrubs ≥ 4 m: For tall trees or shrubs with bigger diaspores ano- ther method is used.

  • Mature trees and shrubs and open, naturalized landscape patterns contribute greatly to the Historic District's environmental setting.

  • Mature trees and shrubs are abundant throughout Clare and make a positive addition to the streetscape and the overall character of the conservation area.

  • Mature trees and shrubs associated with oak-foothill pine woodland cover the majority of the site.

  • Mature trees and shrubs also provide the north and south boundary treatment, supplemented in parts with various fencing.

  • Mature trees and shrubs delineate the boundary to the cul-de-sac and to the side of No.106.

Related to Mature trees and shrubs

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Architect/ consultants means and refer to the Consultants appointed by NU as Architect Consultants.

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • Safeguards Monitoring Report means each report prepared and submitted by the Borrower to ADB that describes progress with implementation of and compliance with the EMP and the RP, including any corrective and preventative actions;

  • The Procuring Agency means the organization purchasing the Goods, as named in SCC.

  • Sub-consultants means an entity to whom/which the Consultant subcontracts any part of the Services while remaining solely liable for the execution of the Contract.

  • Emergency repair means work necessary to prevent destruction or dilapidation to real property or structural appurtenances thereto immediately threatened or damaged by fire, flood, earthquake or other disaster.

  • Non-Administrator Substance Use Disorder Treatment Facility means a Substance Use Disorder Treatment Facility that does not meet the definition of an Administrator Substance Use Disorder Treatment Facility.

  • Shrub means and refer to a woody plant, smaller than a tree, consisting of several small stems from the ground or small branches near the ground.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Autocycle means the same as that term is defined in Section 53-3-102.

  • Respiratory protective equipment means an apparatus, such as a respirator, used to reduce an individual's intake of airborne radioactive materials.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Continuous emissions monitoring system (CEMS) means all of the equipment that may be required to meet the data acquisition and availability requirements of this section, to sample, condition (if applicable), analyze, and provide a record of emissions on a continuous basis.

  • Downtime means the Total Minutes in the Month during which the Cloud Service (or Servers for Server Provisioning) does not respond to a request from SAP’s Point of Demarcation for the data center providing the Cloud Service (or Server for Server Provisioning), excluding Excluded Downtime.

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Plumbing contractor means a licensed master plumber or a person who employs a licensed master plumber full-time to directly supervise the installation of plumbing as his or her representative engaged in the business of plumbing for a fixed sum, price, fee percentage, valuable consideration, or other compensation and who is licensed as a plumbing contractor.

  • Serviceable when used to describe an Engine or Part, means in an airworthy condition within the limits defined in the applicable Engine manuals, specification and/or publications by the type certificate holder.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a pre-selected number of dose monitor units have been delivered.

  • Mobility enhancing equipment means equipment, other than durable medical equipment or a motor vehicle or equipment on a motor vehicle normally provided by a motor vehicle manufacturer, dispensed pursuant to a prescription, including repair or replacement parts for that equipment, that is all of the following:

  • TDP means “TDP” as that term is defined in the Second Amended Joint Plan or as that term is defined in any Plan confirmed by the Bankruptcy Court.

  • Casualty Consultant shall have the meaning set forth in Section 6.4(b)(iii) hereof.