Mechanical recycling definition

Mechanical recycling means a form of recycling
Sample 1Sample 2Sample 3
Mechanical recycling means operations that recycle plastic via physical processes,
Sample 1Sample 2Sample 3
Mechanical recycling means a form of recycling that does not change the basic
Sample 1Sample 2Sample 3

Examples of Mechanical recycling in a sentence

  • Mechanical recycling The use of physical processes such as sorting, chipping, grinding, washing and extruding to convert scrap plastics to a usable input for the manufacture of new products.

  • Mechanical recycling of waste electric and electronic equipment: a review.

  • Achieving this scenario requires concurrently scaling up five synergistic system interventions, specifically: • Eliminationv of unnecessary plastic, reuse, and other new delivery models have the potential to reduce almost 5 Mt of plastic waste per year by 2030 (current commitments and regulations reduce plastic waste by only 1.5 Mt by 2030).• Mechanical recycling across all sub-systems, which could grow by 1.8 times to almost 6 Mt by 2030.

  • The two main possible technologies for recycling are mechanical recycling and chemical recycling.- Mechanical recycling (collecting, cleaning, chipping and remelting of thermoplastics) is the more sustainable option; its technology is proven, it can be managed at a profit, and it emits 50 per cent less greenhouse gas emissions per metric ton of plastic product than chemical recycling.98- Chemical recycling includes a wide array of technologies that for the most part are not yet proven at scale.

  • Mechanical recycling is the most expensive followed by incineration and landfill.• Transportation costs for an entire used turf field can be expensive and may reach a fewper cent of the entire procurement costs, dependent on the final disposal option.• Transportation should be avoided following periods of wet weather, as the turf retains water and increases its weight, which increases the number of trucks required to transport it, increasing costs and fuel consumption.

  • These methods aid in the conversion of waste plastic into lower or same grade plastic materials and/or raw materials.Mechanical recycling Mechanical recycling is the dominant form of material recovery through the processing of plastic waste into secondary raw material or products without significantly changing the chemical structure of the material [11].

  • Mechanical recycling has the least UCF cost, but carbon fibre cannot beselect one of the ex1snng techniques in order to remove waste at minimal cost.

  • Mechanical recycling Examples of easily recyclable plastic products are large sur- face films (e.g. carrier bags), large hollow containers (e.g. bottles), or construction materials (e.g. window frames).

  • Mechanical recycling projects PROJECT UPD A T EFerrara project – Vinyloop®Timescale: 2001 – 2002 The Vinyloop® technology developed by Solvay allows the recycling of PVC, together with most of its additives, into a compound that can easily be used for production of high quality products.The Ferrara plant, owned and operated by a joint venture between Solvin, Adriaplast, Tecnometal and Vulcaflex is the first commercial plant using this technology.

  • The production of stabilisers and plasticisers also play a significant role.• Mechanical recycling, which loops the material back directly into new life cycles, substitutes the processes of resource extraction and virgin PVC production.


More Definitions of Mechanical recycling

Mechanical recycling means a form of recycling that does
Sample 1Sample 2Sample 3
Mechanical recycling means a form of recycling that does not change the basic molecular structure of the material being recycled.
Sample 1Sample 2Sample 3
Mechanical recycling means the use of physical processes
Sample 1Sample 2
Mechanical recycling means the physical recovery of
Sample 1Sample 2
Mechanical recycling means a form of recycling that does not change the basic molec- ular structure of the material being recycled.
Sample 1

Related to Mechanical recycling

  • Clinical record means a legible electronic or hard-copy history that documents the criteria established for medical records as set forth in rule 441—79.3(249A). A claim form or billing statement does not constitute a clinical record.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Medical record means any document or combination of documents, except births, deaths, and the fact of admission to or discharge from a hospital, that pertains to the medical history, diagnosis, prognosis, or medical condition of a patient and that is generated and maintained in the process of medical treatment.

  • Mechanical restraint means any device or object used to limit a student’s movement.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Medical Records the Study Subjects’ primary medical records kept by the Institution on behalf of the Study Subjects, including, without limitation, treatment entries, x-rays, biopsy reports, ultrasound photographs and other diagnostic images. Study Data: all records and reports, other than Medical Records, collected or created pursuant to or prepared in connection with the Study including, without limitation, reports (e.g., CRFs, data summaries, interim reports and the final report) required to be delivered to Sponsor pursuant to the Protocol and all records regarding inventories and dispositions of all Investigational Product.

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Underground source of drinking water means an aquifer or its portion:

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • recyclable waste means the waste that is commonly found in the MSW. It is also called as "Dry Waste". These include many kinds of glass, paper, metal, plastic, textiles, electronics goods, etc.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Drainage means the movement of water to a place of disposal, whether by way of the natural characteristics of the ground surface or by artificial means;

  • Injection means the injection of carbon dioxide streams into the storage site;

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Wastewater means the spent water of a community. From the standpoint of source, it may be a combination of the liquid and water-carried wastes from residences, commercial buildings, industrial plants, and institutions, together with any groundwater, surface water, and storm water that may be present.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.