Mechanical separation definition

Mechanical separation means the separation of waste into various components using mechanical means, such as cyclones, trommels and screens.
Sample 1Sample 2Sample 3
Mechanical separation means to separate a material by a mechanical method such as removal of screws, cutting, grinding or crushing. For example, a covered electrical cable can be mechanically separated into an electrical cable and a cover. It is necessary to separate an electrical cable from a cover and analyze the sub-materials individually.
Sample 1

Examples of Mechanical separation in a sentence

  • Effects in sewage plants: Mechanical separation in a suitable sewage plant is possible.

  • Specification – Materials :All types of pulse grains (red gram, green gram, black gram and chick pea), Attachments: cyclone, aspirator, dehiscing unit, cleaning/grading unit, sieves for different pulses, oil/water box (SS),Capacity: 100-150 kg/h, Power consumption: 3 hp or less, Electric power: 3 phase motor, Operations: Mechanical separation of husk/powder/broken/ unhusked grain and pulses, Accessories: 10 or more sets of spare sieves, tool kit for maintenance of the mill.

  • Shown on the right is the Anaerobic Digestion Plant (which together with the Mechanical separation of recycling of input waste was a requirement from the near beginning of the project in2005).

  • The building coils shall be controlled at the coil air discharge such that the temperature rise shall not be less than 16 oF with the supply temperatures given in 1.3. 1.5 Pumps and plate heat exchangers will only be allowed for buildings with height restrictions that would prevent filling the system completely from the district cooling system.

  • Commonly, there are two types of methods used to disperse NCMs. Mechanical separation of the NCMs by adopting ultrasonic is one of the effective methods for CNT dispersion [31-33].

  • Mechanical separation and recovery of nutrients from waste, using membrane processes, has been proposed and applied to many simple, well defined waste systems, e.g. recovery of cells metabolites and water [15].Microfiltration pore size ranging from 0.1 µm to 1 µm allows smaller particles such as aqueous salts, small macromolecules, carbohydrates, proteins, metal ions and other inorganic and organic molecules to pass through formulating a sterile permeate effluent [16].

  • Mechanical separation of particles from a fluid uses forces acting on these particles.

  • Summary Mechanical separation of meat and bone often results in the incorporation of red bof “a" ° “Red bone marrow added to muscle in large amounts can change functional properties of the raixtu - ount °f , jcolor, texture, flavor and nutritional value of meat products.

  • This produces floc/fibre – stabilised organic and fibre (cardboard/paper) waste Mechanical separation – separation of recyclables and rejects (generally sent to landfill) Floc/ fibre (heat treated materials may be sent for onward biological treatment (composting or anaerobic digestion Recycling of fibre where biological treatment is not undertaken Production of RDFThe autoclave approach utilises a pressure vessel which directs steam to treat residual waste at a constant temperature and pressure.

  • Mechanical separation of C-layers from the UO2 spheres is performed in order to analyse the sphere (Figure 29).

Related to Mechanical separation

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Bulk gasoline terminal means a gasoline storage facility which receives gasoline from its supply source primarily by pipeline, ship, or barge, and delivers gasoline to bulk gasoline plants or to commercial or retail accounts primarily by tank truck; and has an average daily throughput of more than 76,000 liters (20,000 gallons) of gasoline.

  • Manual brachytherapy means a type of brachytherapy in which the brachytherapy sources (e.g., seeds, ribbons) are manually placed topically on or inserted either into the body cavities that are in close proximity to a treatment site or directly into the tissue volume.

  • Brachytherapy means a method of radiation therapy in which sealed sources are utilized to deliver a radiation dose at a distance of up to a few centimeters, by surface, intracavitary, or interstitial application.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Municipal Separate Storm Sewer System Management Program or "MS4 Program" means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations and the Act and attendant regulations, using management practices, control techniques, and system, design and engineering methods, and such other provisions that are appropriate.

  • Air-purifying respirator means a respirator with an air-purifying filter, cartridge, or canister that removes specific air contaminants by passing ambient air through the air-purifying element.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Front fog lamp means the lamp used to improve the illumination of the road in case of fog, snowfall, rainstorms or dust clouds;

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Municipal separate storm sewer system means a conveyance or system of conveyances including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, manmade channels, or storm drains.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Weatherization means building insulation (for attic, exterior walls and crawl space), siding to improve energy efficiency, replacement storm windows, replacement storm doors, replacement windows and replacement doors, and is considered a major system for rehabilitation.

  • Municipal separate storm sewer system (MS4 means a conveyance or system of conveyances (including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, man-made channels, or storm drains):

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Flocculation means a process to enhance agglomeration or collection of smaller floc particles into larger, more easily settleable particles through gentle stirring by hydraulic or mechanical means.

  • Outdoor cultivation means live plants growing in an area exposed to natural sunlight and

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Downstream means carrying a transmission from the Headend to remote points on the Cable System or to Interconnection points on the Cable System.

  • Transportation Service means a service for moving people and goods, such as intercity bus service and passenger rail service.

  • technical service means an organisation or body designated by the approval authority of a Member State as a testing laboratory to carry out tests, or as a conformity assessment body to carry out the initial assessment and other tests or inspections, on behalf of the approval authority, it being possible for the approval authority itself to carry out those functions;

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.