Membrane module definition

Membrane module means the smallest component of a membrane unit in which a specific membrane surface area is housed in a device with a filtrate outlet structure.
Sample 1Sample 2Sample 3
Membrane module means the smallest component of a membrane unit in which a specific
Sample 1

Examples of Membrane module in a sentence

  • Membrane module characteristics Stream properties In Table 10, the energy balance and the main overall performance indexes of these four cases are shown in the 3rd to 6th columns.

  • Membrane module characteristics Stream properties CCMCRMMembranePolarisPolarisSurface, m2 × 10373.41237Channel length [m]Table 8 Properties of the significant streams for the use of a Polaris membrane as the CCM and CRM.

  • Membrane module systems have simple operation with no chemical reactions, no moving parts, and no temperature or pres-cost compared to other technologies.

  • The details of the blood pressure and arthrometric (height, body weight and waist circumference) measurements are found in our previous study [21].

  • All but 26 of the 2,321 non-radiotelephone companies listed by the Census Bureau, 2,295 companies were reported to have fewer than 1,000employees.

  • In a batch operation, the retentate stream is recirculated to the maximum level Membrane module Permeate q(t) minimum level Pump Feed tank Diluant u(t) Retentate Figure 1: Schematic representation of diafiltration settings.

  • Membrane module unit The membrane module is constructed from three stainless steel parts, shown in Figures 5 and 6.

  • Membrane module efficiency is restricted by concentration polarization and fouling- generation, so the development of methods to mitigate these negative impacts are required through investigation of the fluid dynamics through the feed spacer interstices.

  • Figure 4-3 Membrane module The membrane holder (104-1) in which the membrane (104-3) was sealed with glass, was fabricated from a stainless steel tablet of 35.9mm diameter and 12mm thickness which was machined into a cup of internal diameter (25.2mm) just slightly more than the diameter of the membrane disc (25.00mm), with several 2mm diameter holes (104-2) at the base.

  • The third problem is that not all traditional farmers and farming communities are conservers of genetic resources.

Related to Membrane module

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Modules means the Base Modules and Extended Modules.

  • Reagent means any product other than fuel that is stored on-board the vehicle and is provided to the exhaust after-treatment system upon request of the emission control system.

  • Fabrication means making up data or results and recording or reporting them.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Manufacturing Process means any process for—

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • piece-work means any system by which earnings are calculated upon the quantity or output of work performed;

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Licensed Software includes error corrections, upgrades, enhancements or new releases, and any deliverables due under a maintenance or service contract (e.g., patches, fixes, PTFs, programs, code or data conversion, or custom programming).

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Manufacturing Technology means any and all patents, patent applications, know-how, and all intellectual property rights associated therewith that are owned or controlled by Licensor, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno-associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Supplier Software means software which is proprietary to the Supplier or its Affiliates which is used or supplied by the Supplier in the provision of the Services; Supplier Staff means all persons employed or engaged by the Supplier together with the Supplier's servants, agents, suppliers, consultants and Sub-Contractors (and all persons employed by any Sub-Contractor together with the Sub-Contractor’s servants, consultants, agents, suppliers and Sub-Contractors) used in the performance of its obligations under this Contract; Time and Materials means the pricing mechanism for the Services as may be agreed by the Parties and set out at paragraph Error: Reference source not found in the SOW; TUPE means the Transfer of Undertakings (Protection of Employment) Regulations 2006 (SI 2006/246) as amended or replaced or any other regulations or UK legislation implementing the Acquired Rights Directive; Velocity means the Metric which measures the total number of Story Points for Stories that have been accepted in a Sprint, indicating the rate of progress towards Acceptance of all Stories from the Product Backlog;