Minimum Quality Standards definition

Minimum Quality Standards shall have the meaning set forth in Section 6.2(a).
Sample 1Sample 2Sample 3
Minimum Quality Standards shall have the meaning set forth in Section 6.2(a). “NCE Exclusivity” shall mean five years of marketing exclusivity granted by FDA pursuant to its authority under 21 U.S.C. §§ 355(c)(3)(E)(ii) and 355(j)(5)(F)(ii), or similar regulatory exclusivity granted by the appropriate regulatory authority having jurisdiction over the Products.
Sample 1Sample 2Sample 3
Minimum Quality Standards means those standards that address basic equipment and facilities for light, ventilation, and thennal conditions; safety from fire or accident; an adequate level of maintenance; and, the use, location and, amount of space for human occupancy;
Sample 1Sample 2

Examples of Minimum Quality Standards in a sentence

  • Relation to Network Adequacy Regulation and Minimum Quality Standards.

  • Leland, Quacks, Lemons, and Licensing: A Theory of Minimum Quality Standards, 87 J.

  • The Contractor shall be guided by Colorado Minimum Quality Standards for Public Health Services 6CCR 1014-9.

  • GENERAL CONDITIONS - HCD General Conditions and Minimum Quality Standards - HCD HOUSING PROGRAMSGeneral ConditionsandMinimum Quality Standards v.04/16/18General ConditionsThe general conditions establish requirements, policies and procedures that apply to all contractors who participate in the HCD programs that are administered by the HCD department.

  • If Licensee fails at any time to meet the Minimum Quality Standards with respect to the manufacture of API or Product, Gilead and/or MPP may elect, in their sole discretion and notwithstanding Section 10.2 or 10.3 hereof, to suspend the effectiveness of the licenses granted hereunder until such time as Gilead and/or MPP have determined that Licensee has corrected any such failure to Gilead’s and/or MPP's reasonable satisfaction.

  • NTA shall appoint an independent technical consultant in a timely manner for verifying, and supervising the broadband connectivity network as per the quality stated in Minimum Quality Standards (Annex-5), network roll-out requirement and subsequently recommending to NTA for subsidy payment as per SCC.

  • If Licensee fails at any time to meet the Minimum Quality Standards with respect to the manufacture of API or Product, Gilead may elect, in its sole discretion and notwithstanding Section 10.2 or 10.3 hereof, to suspend the licenses granted hereunder until such time Gilead has determined that Licensee has corrected any such failure to Gilead’s reasonable satisfaction.

  • B Minimum Quality Standards for Loan Eligibility For loan eligibility peanuts must not contain less than 2.50 percent or more than 10.49 percent moisture to be eligible for warehouse-stored MAL.

  • Minimum Quality Standards (Organisation level) This section contains the Minimum Quality Standards Questions scored on a Pass/Fail basis that the Authority considers relevant to this requirement.

  • Only units that comply with the Lighting Global Minimum Quality Standards and have a warranty period of two (2) years will be eligible to be included in the program.


More Definitions of Minimum Quality Standards

Minimum Quality Standards shall have the meaning set forth in Section 6.2(a). “MPP” shall mean the public health organization referred to as the Medicines Patent Pool.
Sample 1
Minimum Quality Standards and the acronym “MQS” means the quality standards to be developed by the Project Implementing Entity, in a manner and substance satisfactory to the Association, and to be applied by HEIs as a pre- requisite for the affiliation of colleges and/or requiring the alignment of the colleges’ programs with those of their parent HEIs, as well as prescribing remedial/corrective actions to be taken with underperforming colleges.
Sample 1

Related to Minimum Quality Standards

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • State minimum standards means minimum requirements

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • PJM Region Reliability Requirement means, for purposes of the Base Residual Auction, the Forecast Pool Requirement multiplied by the Preliminary PJM Region Peak Load Forecast, less the sum of all Preliminary Unforced Capacity Obligations of FRR Entities in the PJM Region; and, for purposes of the Incremental Auctions, the Forecast Pool Requirement multiplied by the updated PJM Region Peak Load Forecast, less the sum of all updated Unforced Capacity Obligations of FRR Entities in the PJM Region.

  • High quality waters means all state waters, except:

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Minimum Annual Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Annual Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Sub-Annual Resource Reliability Target for the RTO in Unforced Capacity]. For an LDA, the Minimum Annual Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Sub-Annual Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Availability Standards has the meaning set forth in the CAISO Tariff.

  • Minimum wage means wages as defined under the Minimum Wages Act-1948 and amended from time to time.