Monitoring wells definition

Monitoring wells means a well point below the ground surface for the purpose of obtaining periodic water samples from ground water for quantitative and qualitative analysis.
Sample 1Sample 2Sample 3
Monitoring wells means strategically located wells from which water samples are drawn for water quality analysis.
Sample 1Sample 2Sample 3
Monitoring wells means wells constructed for the purpose of locating and sampling for engineering or geological data;
Sample 1

Examples of Monitoring wells in a sentence

  • Monitoring wells are installed to assess groundwater and soil borings or test pits are installed to sample soil and/or waste(s) identified.

  • Monitoring wells must be located down gradient from the soil treatment area, accessible, and provided with a properly securable cover at or above the ground surface.

  • Monitoring wells must be installed, when time series ground water quality monitoring is required.

  • Monitoring wells, surface water sampling points, parameters and schedules for sampling shall be included.

  • Monitoring wells to be grouted shall be grouted from the surface of the land to the entire depth of the well and then left in place.

  • Monitoring wells shall be either left in place and grouted or removed, per the Project Manager's instructions.

  • Monitoring wells to be removed shall be removed entirely and the area filled.

  • Monitoring wells will be located near USGS stream gauges and MCWRA’s Salinas River Series measurement sites to evaluate groundwater gradient and effects of groundwater levels on surface water depletion.

  • Monitoring wells are installed to assess groundwater and soil borings, or test pits are installed to sample soil and/or waste(s) identified.

  • The manual shall provide for the consistent identification, development, monitoring, sampling, calculating, recording, and reporting of each monitoring well.• Monitoring wells must not be sampled until after they are properly purged.

Related to Monitoring wells

  • Monitoring well means a water well intended for the purpose of determining groundwater quality or quantity.

  • Monitoring RTO means the Party that has operational control of a M2M Flowgate.

  • Processing Plant means plant systems, located on or off the Leased Premises, that include a gas processing plant, natural gasoline plant, gasoline plant, or other plant where raw unprocessed natural gas is processed to remove or extract Raw Mix from the natural gas stream to produce a Pipeline- Quality Natural Gas or Residue Gas and other products, and the Raw Mix is then either (i) separated by fractionation down to its base components prior to storage and/or transport that meets or conforms to all applicable Gas Processors Association (GPA) Standards and/or Specifications for the commercial sale of each liquefiable hydrocarbon product, or (ii) transported to another plant for separation down to its base components by fractionation prior to storage and/or transport for the commercial sale of each liquefiable hydrocarbon product. Any deductions, costs, or processing fees associated with the removal or recovery of Natural Gas Liquids is strictly limited to only that part of any Processing Plant or facility where Raw Mix is recovered, and if applicable at that plant, also fractionated to their component parts.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • Development Well means a well drilled inside the established limits of an oil or gas reservoir, or in close proximity to the edge of the reservoir, to the depth of a stratigraphic horizon known to be productive.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Cannabis processing facility means a person that:

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Well-logging means all operations involving the lowering and raising of measuring devices or tools that may contain sources of radiation into well-bores or cavities for the purpose of obtaining information about the well or adjacent formations.

  • Monitoring device means the total equipment used to measure and record (if applicable) process parameters.

  • Monitoring Period means the period from the Launch Date to the Valuation Date (both dates including) at such point in time at which the Reference Price of the Underlying is determined and published..

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.

  • Wells means all oil or gas wells, whether producing, operating, shut-in or temporarily abandoned, located on an Oil and Gas Lease or any pooled, communitized or unitized acreage that includes all or a part of such Oil and Gas Lease or otherwise associated with an Oil and Gas Property of the applicable Person or any of its Subsidiaries, together with all oil, gas and mineral production from such well.

  • Project Land means any parcel or parcels of land on which the project is developed and constructed by a promoter;

  • Tests on Completion means the tests which are specified in the Contract or agreed by both Parties or instructed as a Variation, and which are carried out under Clause 9 [Tests on Completion] before the Works or a Section (as the case may be) are taken over by the Procuring Entity.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Drill means a response to a planned, simulated event.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.