Peak Dry Weather Flow definition

Peak Dry Weather Flow means the arithmetic mean of the maximum peak flow rates sustained over some period of time (for example three hours) during the maximum 24-hour dry weather period. Dry weather period is defined as period of little or no rainfall.
Sample 1Sample 2Sample 3
Peak Dry Weather Flow means the annual average of the highest flow value for each day of Dry Weather Flow, in MGD. Peak Dry Weather Flow shall be calculated by summing the highest flow values for each day of Dry Weather Flow within a calendar year for which such values can be observed or estimated, and then dividing that figure by the number of days of Dry Weather Flow within that calendar year in which such values are observed or estimated.
Sample 1Sample 2
Peak Dry Weather Flow means the arithmetic mean of the maximum peak flow rates sustained over some
Sample 1

Examples of Peak Dry Weather Flow in a sentence

  • Provide a complete fully automatic pumping system that includes a minimum of two submersible pumps, each with a capacity equal to or greater than the listed PDWF (Peak Dry Weather Flow) for that station.

  • Table III-1: Proposed Outfalls FlowsOUTFALLADWF (MLD)PDWF (MLD)PWWF (MLD)ADWF(m3/s)PDW(m3/s)PWWF(m3/s)Point Cruz (2037 flows)5.411.427.10.0630.1320.314Naha (2047 flows)15.933.380.70.1840.3850.934KGVI (2047 flows)2.85.914.10.0330.0680.163Notes: ADWF: Average Dry Weather flow; PDWF: Peak Dry Weather Flow = ADWF x 2.1; PWWF: Peak Wet Weather Flow = ADWF x 5.0Source: Egis Eau.

  • Model Wet Weather Flow (MWWF) – MWWF is the highest hourly flow predicted by the hydraulic model during a 1-year wet weather event Peak Dry Weather Flow (PDWF) – PDWF is the highest measured hourly flow that occurs on a dry weather day.

  • The Doctor will not be held responsible for any pre-existing medically diagnosed conditions nor for any medical diagnosis.

  • The model evaluates Average Dry Weather Flow (ADWF), Peak Dry Weather Flow (PDWF) and Peak Wet Weather Flow (PWWF) in the Brine Line system.

  • It does not handle problems which involve the original sale of a new or used vehicle, personal injury or property damage (or claims for subsequent damages), fires, accidents, abuse of thevehicle, disputes relating to design of the vehicle or part, or disputes which are already the subject of litigation.

  • Based upon a flow calculation document provided by the City, the design Average Dry Weather Flow (ADWF) for the station is 196 l/s (3100 USGPM) and the Peak Dry Weather Flow (PDWF) is 469 l/s (7440 USGPM).

  • The head is extended back, attempting to keep the face above the water whilst trying to breathe.

  • As relevant to Mr Napier’s application: [a] The Tribunal will make its own assessment of whether Mr Napier is a fit and proper person to hold a licence.

  • Although sufficient treatment capacity exists, due to capacity constraints, a Peak Dry Weather Flow (“PDWF”) of 16 l/s only can be accommodated by the current network, and the full Peak Dry Weather Flow can only be accommodated once the gravity mains have been upgraded.

Related to Peak Dry Weather Flow

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Peak flow means the maximum instantaneous rate of flow of water at a particular point resulting from a storm event.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Suction outlet means the opening or fitting through which the water under negative pressure is drawn from the pool or spa.

  • Shadow tray means a device attached to the radiation head to support auxiliary beam blocking material.

  • Cannabis testing facility means an entity registered by

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Dry cleaning facility means an establishment with one or more dry cleaning systems.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Manual Load Dump Warning means a notification from PJM to warn Members of an increasingly critical condition of present operations that may require manually shedding load.

  • Generation Service means the sale of electricity, including ancillary services such as the provision of reserves, to a Customer by a Competitive Supplier.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Wind Turbine means a mechanical/electrical system that converts the kinetic energy of blowing wind into mechanical or electric power.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Unmanned aircraft means an aircraft that is not:

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.