Perimeter Control definition

Perimeter Control means a barrier that prevents sediment from leaving a site by filtering sediment-laden runoff or diverting it to a sediment trap or basin.
Sample 1Sample 2Sample 3
Perimeter Control means a barrier that pre- vents sediment from leaving a site by filtering sedi- ment-laden runoff or diverting it to a sediment trap or basin.
Sample 1Sample 2Sample 3
Perimeter Control means a barrier that prevents sediment from leaving a site by
Sample 1

Examples of Perimeter Control in a sentence

  • Perimeter Control A barrier that prevents sediment from leaving a site by filtering sediment-laden runoff or diverting it to a sediment trap or basin.

  • XExclusion ZoneContamination Reduction ZoneHazardous Evacuation AreaEvacuationStaging Area andCommand Post are Located Up-WindArea Site Perimeter Control Line Threatened Support ZoneWindIDLHTLV/TWAThe following figure identifies a CONTROL ZONE that is an example of how a scene should be set up by law enforcement for site security.

  • D MeasurementThe department will measure Perimeter Control Logs by the linear foot, acceptably completed.

  • Chapter 5 Perimeter Control for multi-neighborhood cities THIS chapter provides all the necessary tools to apply perimeter control strategies, which do not rely on forecasting, for multi-neighborhood cities.

  • The Perimeter Control Team will respond to emergencies when requested by Purdue Dispatch Center (PDC) personnel.

  • B MaterialsFurnish Perimeter Control Logs from the Approved Temporary Ditch Checks list in the latest edition of the WisDOT Erosion Control Product Acceptability List and as follows.

  • This special provision describes furnishing, installing, maintaining, and removing Perimeter Control Logs for sediment retention.

  • When installing Sediment Tubes for Perimeter Control on a soil surface, construct a small U-shaped trench to a depth that is 20% of the perimeter control diameter/height.

  • Remove sediment deposits that impair the sediment control capability of the Perimeter Control when the sediment reaches one-third of the height of the exposed Perimeter Control.

  • Remove all rocks, clods, vegetation, or other obstructions that would prevent the installed Perimeter Control from having direct contact with the underlying soil or surface.


More Definitions of Perimeter Control

Perimeter Control means a barrier that prevents sediment from leaving a site or entering any surface water or MS4, either by filtering sediment-laden runoff or by diverting it to a sediment trap or basin.
Sample 1

Related to Perimeter Control

  • Perimeter means the fenced or walled area of the institution that restrains the movement of the inmates.

  • border control means the activity carried out at a border, in accordance with and for the purposes of this Regulation, in response exclusively to an intention to cross or the act of crossing that border, regardless of any other consideration, consisting of border checks and border surveillance;

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Water control structure means a structure within, or adjacent to, a water, which intentionally or coincidentally alters the hydraulic capacity, the flood elevation resulting from the two-, 10-, or 100-year storm, flood hazard area limit, and/or floodway limit of the water. Examples of a water control structure may include a bridge, culvert, dam, embankment, ford (if above grade), retaining wall, and weir.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • State Water Control Law means Chapter 3.1 (§ 62.1-44.2 et seq.) of Title 62.1 of the Code of Virginia.

  • area control service means air traffic control service for controlled flights in control areas;

  • Boundary means any lateral or street boundary of a site;

  • control zone shall have the meaning given in the Operating Agreement.

  • PJM Control Area means the Control Area recognized by NERC as the PJM Control Area.

  • Control Area(s) means an electric power system or combination of electric power systems to which a common automatic generation control scheme is applied.

  • Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services.

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region.

  • Primary enclosure means any structure used to immediately restrict an animal or animals to a limited amount of space, such as a room, pen, cage, compartment, or hutch.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Virginia Stormwater Management Program or “VSMP” means a program approved by the State Board after September 13, 2011, that has been established by a locality to manage the quality and quantity of runoff resulting from land-disturbing activities and shall include such items as local ordinances, rules, permit requirements, annual standards and specifications, policies and guidelines, technical materials, and requirements for plan review, inspection, enforcement, where authorized in this article, and evaluation consistent with the requirements of this article and associated regulations.

  • Area Control Error or “ACE” shall mean the instantaneous difference between a Balancing Authority’s net actual and scheduled interchange, taking into account the effects of Frequency Bias and correction for meter error.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Controlled substance analog means a substance the chemical structure of which is substantially

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • townsite in relation to the townsite to be established near the harbour means a townsite (whether or not constituted and defined under section 10 of the Land Act) primarily to facilitate the Company’s operations in and near the harbour and for employees of the Company and in relation to the mining areas means such a townsite or townsites or any other townsite or townsites which is or are established by the Company for the purposes of its operations and employees on or near the mining areas in lieu of a townsite constituted and defined under section 10 of the Land Act;

  • Access control means a system for allowing only approved individuals to have unescorted access to the security zone and for ensuring that all other individuals are subject to escorted access.