Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.
Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.
Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.
Cannabinoid means any of the chemical compounds that are the active constituents of marijuana.
Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.
Tetrahydrocannabinol means the natural or synthetic equivalents of the substances contained in the plant, or in the resinous extractives of, Cannabis sativa, or any synthetic substances, compounds, salts, or derivatives of the plant or chemicals and their isomers with similar chemical structure and pharmacological activity.
Cannabinoid edible means food or potable liquid into which a cannabinoid concentrate, cannabinoid extract or dried marijuana leaves or flowers have been incorporated.
Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.
Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.
Cannabinoid concentrate means a substance obtained by separating cannabinoids from marijuana by:
Polymer means a substance consisting of molecules characterised by the sequence of one or more types of monomer units. Such molecules must be distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units. A polymer comprises the following:
Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.
Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.
Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);
Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.
Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;
cannabis resin means the separated resin, whether crude or purified, obtained from any plant of the genus Cannabis;
Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.
Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.
Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).
Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.
Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.
Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.
Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:
Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);
Grinding means to reduce to powder or small fragments and includes mechanical chipping or drilling.