Photo radar definition

Photo radar means a device used primarily for highway speed limit enforcement substantially consisting of a low power doppler radar unit and camera mounted in or on a vehicle, which automatically produces a photograph of a vehicle traveling in excess of the legal speed limit, with the vehicle's speed, the date, time of day, and location of the violation printed on the photograph.
Sample 1Sample 2Sample 3
Photo radar means a device used primarily for highway speed
Sample 1Sample 2
Photo radar means a device used primarily for highway speed limit enforcement substantially consisting of a radar unit linked to a camera, which automatically produces a photograph of a vehicle traveling at a speed in excess of the legal limit.
Sample 1Sample 2

Examples of Photo radar in a sentence

  • Photo radar is a method of traffic speed enforcement that is used to detect speeding violations and record identifying information about the vehicle and driver automatically.

  • Photo radar could be an optionBetter shoulders, rest areas.• No - not in all cases.more passing lanes, the longer ones would make a difference.

  • Photo Radar Photo radar was used in some manner in all countries visited.

  • Closing procedure- Retractable bollards set up by school staff- Temporary or permanent one-way signs- Signage prohibiting car traffic during certain periods or permanently in the case of the establishment of a one-way street- Photo radar to fine vehicles on school corridors during prohibited periods Photo: Beth A.

  • Photo radar units with and without direction are much different in the information they provide than cameras or alarms.

  • Photo radar is often used at high-risk locations where the safety of citizens or police officers or peace officers would be at risk through conventional enforcement methods.

  • Photo radar is a method of traffic speed enforcement that is used to detect speeding violationsand record identifying information about the vehicle and driver automatically.

  • Photo radar and red light cameras and school speed zones – the 40 Km signs were installed in the area this week.

  • These systems are also known as "photo radar" and "photo red." Photo radar systems use a camera to detect vehicles that are traveling faster than posted speed limits, while photo red systems use cameras to detect vehicles running through red lights at traffic signals.

  • The driver must also report to the supervisor or department head the result of the traffic citation (not guilty, guilty, no contest, fine paid, bail forfeited, etc.) Photo radar or other citations issued against the registered owner will be forwarded to the driver’s assigned department.


More Definitions of Photo radar

Photo radar means a device used primarily for speed limit or traffic control signal enforcement consisting of a radar or lidar unit and camera which automatically produces
Sample 1

Related to Photo radar

  • Supported Web Browser means the current release from time to time of Microsoft Edge, Mozilla Firefox, Google Chrome or Apple Safari, or any other web browser that the Provider agrees in writing shall be supported;

  • Machine gun means any firearm known as a machine gun,

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Integrated Digital Loop Carrier means a subscriber loop carrier system that is twenty-four (24) local Loop transmission paths combined into a 1.544 Mbps digital signal which integrates within the switch at a DS1 level.

  • Universal Digital Loop Carrier (UDLC means the DLC system that has a CO terminal channel bank that is connected to the CO switches on the analog side.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Common Channel Signaling (CCS) means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • Server Software means software that provides services or functionality on a computer acting as a server.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.

  • Production, Use or Storage of Nuclear Material means the production, manufacture, enrichment, conditioning, processing, reprocessing, use, storage, handling and disposal of Nuclear Material.

  • Technology means all Software, content, websites, technical data, subroutines, tools, materials, invention disclosures, improvements, apparatus, creations, works of authorship and other similar materials, and all recordings, graphs, drawings, reports, analyses, documentation, user manuals and other writings, and other tangible embodiments of the foregoing, in any form whether or not specifically listed herein.

  • SDK means the JetBrains Rider Software Development Kit and specifically including any associated JetBrains Rider software files, documentation, software code or other materials made available by JetBrains and any third-party software programs that are owned and licensed by parties other than JetBrains and that are either integrated with or made part of the SDK (collectively, “Third-Party Software”).

  • aeroplane means a power-driven heavier-than-air aircraft, deriving its lift in flight chiefly from aerodynamic reactions on surfaces which remain fixed under given conditions of flight;

  • PNode has the meaning set forth in the CAISO Tariff.

  • Ethernet means a family of computer networking technologies for LANs.

  • Personalized license plate means a license plate that has displayed on it a

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.