Provider Feed Water Flow Meter definition

Provider Feed Water Flow Meter has the meaning set forth in Section 6.8(b).
Sample 1Sample 2Sample 3

Examples of Provider Feed Water Flow Meter in a sentence

  • The measurement accuracy of the Off-Taker Feed Water Instruments shall correspond to the level of accuracy, as applicable, in respect of the Provider Feed Water Flow Meter and the Provider Feed Water Instruments set forth in Section 6.8(b).

  • If, however, the Provider Feed Water Flow Meter or any Provider Feed Water Instrument is not operating as designed, and the Off-Taker Feed Water Instruments are all operating as designed, then the Off-Taker Feed Water Instruments will be utilized to determine the Feed Water flow rate, temperature and pressure during the period of inoperability in respect of the Provider Feed Water Flow Meter or any Provider Feed Water Instrument.

  • The Provider Feed Water Flow Meter shall measure Feed Water flow to an accuracy of not less than plus or minus one percent (+/- 1%).

  • The Provider Feed Water Flow Meter (in conjunction with the Provider Feed Water Instruments) and the Off-Taker Feed Water Instruments will be designed to automatically calculate Feed Water deliveries on a MMBTUs basis.

  • When the Provider Feed Water Flow Meter and both Provider Feed Water Instruments are operating as designed, their respective measurements will be used to determine the flow, temperature and pressure of all corresponding Feed Water delivered to the Feed Water Measuring Point.

  • The Provider Feed Water Flow Meter, Provider Feed Water Instruments, Off-Taker Feed Water Instruments, Provider Feed Water Monitoring Equipment and Off-Taker Feed Water Monitoring Equipment shall be subject to the approval of the Parties, and the Parties shall approve the same, in Writing, at least six (6) Months prior to the commencement of the Initial Operating Period (and in any case prior to their installation).

  • Provider shall calibrate (as an Operating Expense) each of the Provider Feed Water Flow Meter, Provider Feed Water Instrument, Provider Feed Water Monitoring Equipment, Provider Steam Flow Meter, Provider Steam Instruments and Provider Steam Monitoring Equipment (i) at the frequency recommended by its manufacturer or, if no manufacturer’s recommendation exists, in accordance with Prudent Operating and Maintenance Practices; and (ii) in any event not less than once per six (6) months.

Related to Provider Feed Water Flow Meter

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Processing Plant means plant systems, located on or off the Leased Premises, that include a gas processing plant, natural gasoline plant, gasoline plant, or other plant where raw unprocessed natural gas is processed to remove or extract Raw Mix from the natural gas stream to produce a Pipeline- Quality Natural Gas or Residue Gas and other products, and the Raw Mix is then either (i) separated by fractionation down to its base components prior to storage and/or transport that meets or conforms to all applicable Gas Processors Association (GPA) Standards and/or Specifications for the commercial sale of each liquefiable hydrocarbon product, or (ii) transported to another plant for separation down to its base components by fractionation prior to storage and/or transport for the commercial sale of each liquefiable hydrocarbon product. Any deductions, costs, or processing fees associated with the removal or recovery of Natural Gas Liquids is strictly limited to only that part of any Processing Plant or facility where Raw Mix is recovered, and if applicable at that plant, also fractionated to their component parts.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Emission control system means the electronic engine management controller and any emission related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller.

  • CAISO Grid means the system of transmission lines and associated facilities of the Participating Transmission Owners that have been placed under the CAISO’s operational control.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Water supply system means a water distribution system, piping, connection fittings, valves and appurtenances within a building, structure, or premises. Water supply systems are also referred to commonly as premise plumbing systems.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Transportation Service means a service for moving people and goods, such as intercity bus service and passenger rail service.

  • Generator Operator means the Person that Operates the Generating Facility and performs the functions of supplying electric energy and interconnected operations services within the meaning of the NERC Reliability Standards.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Surplus Interconnection Service means any unneeded portion of Interconnection Service established in an Interconnection Service Agreement, such that if Surplus Interconnection Service is utilized, the total amount of Interconnection Service at the Point of Interconnection would remain the same. Switching and Tagging Rules:

  • Basic gas supply service means gas supply service that is

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider. Interconnection Service Agreement:

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Carrier Access Billing System (“CABS”) is the system which is defined in a document prepared under the direction of the Billing Committee of the OBF. The CABS document is published by Telcordia in Volumes 1, 1A, 2, 3, 3A, 4 and 5 as Special Reports SR-OPT-001868, SR-OPT-0011869, SR-OPT-001871, SR-OPT- 001872, SR-OPT-001873, SR-OPT-001874, and SR-OPT-001875, respectively, and contains the recommended guidelines for the billing of access and other connectivity services. Sprint’s carrier access billing system is its Carrier Access Support System (CASS). CASS mirrors the requirements of CABS.

  • Alarm system means equipment and devices assembled for the purpose of:

  • Public water supply system means a system for the provision to the public of piped water for human consumption, if the system has at least fifteen service connections or regularly serves at least twenty-five individuals. The term includes any source of water and any collection, treatment, storage, and distribution facilities under control of the operator of the system and used primarily in connection with the system, and any collection or pretreatment storage facilities not under such control which are used primarily in connection with the system.