Quality control checks definition

Quality control checks means the steps taken by a laboratory to monitor the accuracy and precision of its analysis of samples.
Sample 1Sample 2Sample 3
Quality control checks means the steps taken by laboratory analysts to monitor the accuracy and precision of sample analysis.
Sample 1
Quality control checks means the steps taken by labora- tory analysts to monitor the accuracy and precision of sample analysis.
Sample 1

Examples of Quality control checks in a sentence

  • Quality control checks are carried out on the incoming raw materials, during production and on the finished product.

  • Quality control checks will be completed by WDFW and funded by IPC.

  • Quality control checks will be completed by WDFW and PIT tags will be inserted by IPC and WDFW staff as part of a cooperative effort.

  • Quality control checks shall be conducted at a rate of at least 10 to 20 percent of the total number of samples collected and should be run at the rate of approximately one per batch of samples; a batch is considered to be 20 samples or less for a given calendar day.

  • Quality control checks are carried out on the raw material, during and at the end of production.

  • Quality control checks and editing of the data were conducted on GS ‘Katrina’, at the TLI office in Biloxi, MS, upon completion of the data collection phase of the survey.

  • Quality control checks: Quality Control checks are performed by the operators either manually or remotely every two weeks for each gaseous analyzer in the CDPHE/APCD operated network.

  • Quality control checks and editing of the data were conducted on GS ‘Katrina’ in the Biloxi office upon completion of the data collection phase of the survey.

  • They may be summarized in the Technical Requirements Section 4 of this Tender document.F11.2. Quality Control Process in the proposed system: As discussed earlier in the paragraphs of F 7 to F 9, there are TWO stages of Quality control checks required to be applied.

  • Quality control checks include (but are not limited to) the following types of activities: regular use of certified reference materials and/or internal quality control using secondary reference materials; replicate tests or calibrations using the same or different methods; re-testing or re-calibration of retained items; and correlation of results for different characteristics of an item.

Related to Quality control checks

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • air traffic control service means a service provided for the purpose of:

  • Specialty contractor means a person who is licensed to conduct business as described in subsection 4 of NRS 624.215.

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • City contractor means any person that enters into an agreement with the City to furnish products or services to or for the City.

  • Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.

  • Inventory control system means a system described in Section 4-41a-103.

  • Chief Pretrial Services Officer (i.e., CPSO) means the individual appointed by the court to supervise the work of the court’s pretrial services staff. For the purpose of the contract, the “Chief Probation Officer” acts as the contract administrator on behalf of the Director of the Administrative Office of the United States Courts.

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region.

  • Contract Monitor means the Department employee identified in Section 1.6 of the IFB as the Contract Monitor.

  • Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.

  • border control means the activity carried out at a border, in accordance with and for the purposes of this Regulation, in response exclusively to an intention to cross or the act of crossing that border, regardless of any other consideration, consisting of border checks and border surveillance;

  • Non-Administrator Dialysis Facility means a Dialysis Facility which does not have an agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan but has been certified in accordance with the guidelines established by Medicare.

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Quality Assurance Plan or “QAP” shall have the meaning set forth in Clause 11.2;

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Database Management System (“DBMS”) is a computer process used to store, sort, manipulate and update the data required to provide Selective Routing and ALI.

  • Secondary Systems means control or power circuits that operate below 600 volts, AC or DC, including, but not limited to, any hardware, control or protective devices, cables, conductors, electric raceways, secondary equipment panels, transducers, batteries, chargers, and voltage and current transformers.

  • Earned value management system means an earned value management system that complies with the earned value management system guidelines in the ANSI/EIA-748.

  • Quality Assurance means a systematic procedure for assessing the effectiveness, efficiency, and appropriateness of services.

  • Quality Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.3 of Exhibit B to the ITP.