Recirculation Piping definition

Recirculation Piping means the piping from the pool to the filters and back to the pool, through which the pool water circulates.
Sample 1Sample 2Sample 3

Examples of Recirculation Piping in a sentence

  • Diagram of Nuclear Boiler and Reactor Recirculation Piping is shown in FSAR Figure 5.1-1.

  • Boiler Feed water Recirculation Piping Separate recirculation line for boiler feed pump shall be provided from the non return cum modulating recirculation valves with necessary isolation valves and pressure break down orifices and shall be connected to the deaerator.

  • The purpose of the modifications was to protect the Reactor Internals and Reactor Recirculation Piping by reduction of Intergranular Stress Corrosion Cracking (IGSCC).

  • The October 14th notice to Shermco was of a proposed award to Tayko; it was not a final decision.

  • The remaining embedded piping sections are as follows: - One three foot length of 4” Water Treatment system piping - One three foot length of 8” piping marked “Spare” on area PI&Ds - One three foot length of 8” Secondary Plant Condensate Makeup system piping - One three foot length of 1 ½” Auxiliary Steam Generator Feed Pump Discharge and Recirculation Piping The calculated surface area of the Main Steam Valve House penetrations is approximately 2 m2.

  • Manual discharge of each SRV at 1000 psig, and at planned transient tests that result in SRV discharge 3.9.2.1a.2 Thermal Expansion Testing of Main Steam and Recirculation Piping The thermal expansion preoperational and startup testing program verifies that normal thermal movement occurs in the piping systems, and is performed through the use of potentiometer sensors.

  • Closed) Violation (VIO) 05000528,529,530/2004014-01, Failure to Maintain Design Control of Containment Sump Recirculation Piping.

  • Operators further reduced power several hours later to 90% in accordance with engineering procedure HC.ER-AP.BB-0002, "Hope Creek Recirculation Piping Vibration Monitoring," when vibration levels on the 'B' reactor recirculation ring header exceeded vibration level action limits.

  • PNPS 29.0 Mobilization For Piping Removal PNPS 30.0 Removal, Testing, Storage and Installation of PNPS 50.0 Recirculation Piping Removal Procedure | No violations were identified.

  • Deltete Millstone #1 Recirculation Piping and RWCU Piping Decontamination 497 T.

Related to Recirculation Piping

  • Drainage system means one or more artificial ditches, tile drains or similar devices which collect surface runoff or groundwater and convey it to a point of discharge.

  • Bulkhead means an airtight structure separating the working chamber from free air or from another chamber under a lower pressure than the working pressure;

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Flocculation means a process to enhance agglomeration or collection of smaller floc particles into larger, more easily settleable particles through gentle stirring by hydraulic or mechanical means.

  • Load Shedding means the systematic reduction of system demand by temporarily decreasing load in response to transmission system or area capacity shortages, system instability, or voltage control considerations under Tariff, Part II or Part III.

  • Navigable waters ’ means the waters of the United States, including the territorial sea;

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Pipe or “Piping” means a hollow cylinder or tubular conduit that is constructed of non-earthen materials.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).