Reinforced fill definition

Reinforced fill or “reinforced soil” means soil fill designed by a geotechncial engineer which includes reinforcement consisting of metal or synthetic materials in bars, trips, grids, or sheets.

Examples of Reinforced fill in a sentence

  • Reinforced fill material shall be placed in such a manner to avoid damage or disturbance of the wall materials, misalignment of facing panels, or damage to fill reinforcement or facing members.

  • Reinforced fill material located within the Selected Material Zone of a road embankment must also meet the requirements for Selected Material as stated in Specification TfNSW R44.

  • Reinforced fill zone limits shall be as indicated on the approved shop drawings.

  • Reinforced fill retaining walls may be designed in accordance with “Guide to Reinforced Fill Structure and Slope Design” (GEOGUIDE 6) published by GEO.

  • If the draft Quality Manual is not approved, the Department’s comments shall be incorporated by the Design-Builder.

  • Surface Water Infiltration Wall face Reinforced fill Retained fill Groundwater Foundation Soil Figure 5-4.

  • Reinforced fill soils must meet the indicated criteria to be qualified for use in MSE construction using steel reinforcements.

  • Reinforced fill shall be compacted to 95 percent of the maximum density as determined by AASHTO T-99, Method C or D (with oversized corrections as outlined in Note 7 of that test).

  • Surface Water InfiltrationWallfaceRetained fillGroundwaterFoundation Soil Reinforced fill Figure 5-4.

  • Reinforced fill materials shall have a placement moisture content less than or equal to the optimum content.

Related to Reinforced fill

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Large municipal separate storm sewer system means all municipal separate storm sewers that are either:

  • Small municipal separate storm sewer system or "small MS4" means all separate storm sewers that are (i) owned or operated by the United States, a state, city, town, borough, county, parish, district, association, or other public body (created by or pursuant to state law) having jurisdiction over disposal of sewage, industrial wastes, stormwater, or other wastes, including special districts under state law such as a sewer district, flood control district or drainage district, or similar entity, or an Indian tribe or an authorized Indian tribal organization, or a designated and approved management agency under § 208 of the CWA that discharges to surface waters and (ii) not defined as "large" or "medium" municipal separate storm sewer systems or designated under 4VAC50-60-380 A 1. This term includes systems similar to separate storm sewer systems in municipalities, such as systems at military bases, large hospital or prison complexes, and highway and other thoroughfares. The term does not include separate storm sewers in very discrete areas, such as individual buildings.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.

  • PAD means a Preauthorized Debit.

  • Band means the Pokagon Band of Potawatomi Indians.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Grade means the average level of finished ground adjoining a building or structure at all exterior walls;

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • Density means the permitted number of dwelling units per

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Moderate means violations that result in negative outcome and actual or potential harm for a resident.

  • Moving beam radiation therapy means radiation therapy with any planned displacement of radiation field or patient relative to each other, or with any planned change of absorbed dose distribution. It includes arc, skip, conformal, intensity modulation and rotational therapy.

  • Campsite means any place where any bedding, sleeping bag, or other material used for bedding purposes, or any stove or fire is placed, established or maintained for the purpose of maintaining a temporary place to live, whether or not such place incorporates the use of any tent, lean-to, shack, or any other structure, or any vehicle or part thereof.

  • Non-Administrator Ambulatory Surgical Facility means an Ambulatory Surgical Facility which does not meet the definition of an Administrator Ambulatory Surgical Facility.

  • Population means the population as ascertained at the last preceding census of which the relevant figures have been published;