Sample conditioning system definition

Sample conditioning system means the parts of the PN measurement systems that dilute and condition the aerosol to be provided to the particle number counter to determine TPN10 and SPN10, respectively.
Sample 1Sample 2Sample 3

Examples of Sample conditioning system in a sentence

  • Sample conditioning system shall be designed and constructed to receive and condition all samples as required by the respective analyzers connected to the sample streams.

  • Sample conditioning system shall consist of pressure, flow & temperature regulation, sampling valves, tubes, filters, fittings etc.

  • Take out the analyzer and the start-up kit The 330S H2S analyzer with a standard Sample conditioning system weights approximately 105 lb.

  • Sample conditioning system shall be mounted in a cabinet with enough working space.

  • Sample conditioning system shall be designed and constructed to fully meet the intent and requirements of this specification.

  • Sample conditioning system shall be designed and constructed to receive and condition all samples (listed in the enclosed Sample Stream Specification) as required by the respective analysers connected to the sample streams.

  • Sample conditioning system suitable for both dry as well as wet natural gas.

  • The Chromatograph & Sample conditioning system shall be designed in such a way that the same can be used in dry natural gas as well as wet natural gas.

  • Sample conditioning system – Take pictures of SCS before disassembling • Remove filter elements from filter housings and discard • Remove all sample conditioning system components and soak in cleaning solution • Ensure valves are fully open when cleaning • Flush sample components with fresh water • Rinse with isopropyl alcohol • Blow dry with clean compressed air or fuel gas • If the clear Vinyl tubing appears discolored, replace the tubing.

  • Sample conditioning system shall be designed and constructed to receive and condition all samples (listed in the enclosed Sample Stream Specification) as required by the respective analyzers connected to the sample streams.

Related to Sample conditioning system

  • Plumbing system means water supply distribution and disposal piping on the premises, including appliances and equipment attached thereto, between their connection points to a public or private system.

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • Sanitary Sewer System means all facilities, including approved LOSS, used in the collection, transmission, storage, treatment, or discharge of any waterborne waste, whether domestic in origin or a combination of domestic, commercial, or industrial wastewater. LOSS are only considered sanitary sewer systems if they are designed to serve urban densities. Sanitary sewer system is also commonly known as public sewer system.

  • Continuous monitoring system means the total equipment, required under the emission monitoring section in applicable subsections used to sample and condition (if applicable), to analyze, and to provide a permanent record of emissions or process parameters.

  • Building Systems The mechanical, electrical, plumbing, sanitary, sprinkler, heating, ventilation and air conditioning (“HVAC”), security, life-safety, elevator and other service systems or facilities of the Building up to the point of connection of localized distribution to the Premises.

  • Record system means any group of records under the control of the division from which a record may be retrieved by a personal identifier such as the name of an individual, number, symbol, or other unique retriever assigned to an individual.