SAP EarlyWatch Alert definition

SAP EarlyWatch Alert means a tool provided by SAP that monitors the essential administrative areas of SAP components and updates the user on their performance and stability which is described in more detail under https://support.sap.com/ewa.
SAP EarlyWatch Alert means a tool provided by SAP that monitors the essential administrative areas of SAP components and updates the user on their performance and stability which is described in more detail under https://support.sap.com/ewa.’SAP EarlyWatch AlertyὪ SAP ㇨ὃ}—Ⓒ‡℟›$fi䚋㍏ SAP ýfl$⽭天g䎮‰➇›䁢®$Ⓐ㚜㕘%㓰傥䨑;fi›娚‡℟娛䳘婒㖶 Ὢ¾fl:https://support.sap.com/ewa○

Examples of SAP EarlyWatch Alert in a sentence

  • Activate SAP EarlyWatch Alert for the Production Systems and transmit data to Licensee’s productive SAP Solution Manager Enterprise Edition system.

  • In these cases, SAP EarlyWatch Alert should be used weekly on Production System and must be checked by Partner not less frequently than four times per year.

  • Failure to use the maintenance services provided by SAP or Partner such as Remote Services, SAP Technical Quality Checks, SAP EarlyWatch Alert, and/or Remote Connection for Supported End Users can result in a situation where SAP is unable to identify potential problems and provide support in eliminating those problems.

  • In cases where SAP Solution Manager is mandatory, Partner is required to activate SAP EarlyWatch Alert for the Production Systems and transfer into own SAP Solution Manager.

  • If required by applicable law, Partner must obtain written data protection consents from Supported End Users.• Partner must activate SAP EarlyWatch Alert as a mandatory part of SAP Enterprise Support.

  • SAP will examine vital alerts reported by SAP EarlyWatch Alert and work to resolve Top-Issues directly with the Supported End User and/or Partner.• Global 24x7 Incident root cause analysis and escalation procedures in accordance with Section B.

  • The detailed guidelines for this documentation can be found in the document "Solution Documentation" provided by SAP on the SAP Service Marketplace at http://support.sap.com/supportstandards.o SAP EarlyWatch Alert is activated at least for the Production Systems of Supported End Users and is transmitting data to the Partner’s productive SAP Solution Manager.• In case of SAP Enterprise Support, an Initial Assessment based on SAP standards and documentation as described in Section B.

  • Article 3 (SAP Solution Manager).Technical Quality Checks• In case of vital alerts reported by SAP EarlyWatch Alert or in case of Top Issues Partner may request for a specific Supported End User technical quality checks to be delivered by SAP as further described in the Technical Support Guide (“Technical Quality Check” or “TQC”).

  • In cases where SAP Solution Manager is mandatory,Partner is required to activate SAP EarlyWatch Alert for the Production Systems and transfer into own SAP Solution Manager.

  • See SAP Note 1257308 for information on setting up this service./ Mengaktifkan SAP EarlyWatch Alert untuk Sistem Produksi dan mengirim data ke sistem SAP Solution Manager Enterprise Edition yang produktif milik Penerima Lisensi.

Related to SAP EarlyWatch Alert

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • AHYDO Catch-Up Payment means any payment, including payments made on subordinated debt obligations, in each case to the extent such payment is necessary to avoid the application of Section 163(e)(5) of the Code.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Automotive hard paste wax means an automotive wax or polish that is:

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Lowest Achievable Emission Rate (LAER means, for any source, the more stringent rate of emissions based on the following:

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Elevated blood lead level means a level of lead in blood that is any of the following:

  • Disposable earnings means that part of the earnings of an

  • Distribution Compliance Period means the period that ends 40 days after the completion of the distribution of each Tranche of Notes, as certified by the relevant Dealer (in the case of a non-syndicated issue) or the relevant Lead Manager (in the case of a syndicated issue);

  • Non-Administrator Ambulatory Surgical Facility means an Ambulatory Surgical Facility which does not meet the definition of an Administrator Ambulatory Surgical Facility.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Mean Sea Level means the average height of the sea for all stages of the tide. It is used as a reference for establishing various elevations within the floodplain. For the purposes of this Ordinance, the term is synonymous with the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, to which Base Flood Elevations shown on a community's Flood Insurance Rate Map are referenced.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Basic generation service or "BGS" means electric generation

  • SONIA Compounded IndexStart means, with respect to an Interest Accrual Period, the SONIA Compounded Index determined in relation to the day falling the Relevant Number of London Banking Days prior to the first day of such Interest Accrual Period; and

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Limited Resource Price Decrement means, for the 2017/2018 Delivery Year, a difference between the clearing price for Limited Demand Resources and the clearing price for Extended Summer Demand Resources and Annual Resources, representing the cost to procure additional Extended Summer Demand Resources or Annual Resources out of merit order when the Limited Resource Constraint is binding. List of Approved Contractors:

  • SONIA Compounded IndexEnd means the SONIA Compounded Index Value on the date falling “p” London Business Days prior to (i) in respect of an Interest Accrual Period, the Interest Payment Date for such Interest Accrual Period, or (ii) if the Notes become due and payable prior to the end of an Interest Accrual Period, the date on which the Notes become so due and payable; and