Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.
Best available control technology (BACT means an emission limitation based on the maximum degree of reduction for each air pollutant subject to regulation under chapter 70.94 RCW emitted from or which results from any new or modified stationary source, which the permitting authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes and available methods, systems, and techniques, including fuel cleaning, clean fuels, or treatment or innovative fuel combustion techniques for control of each such pollutant. In no event shall application of the "best available control technology" result in emissions of any pollutants which will exceed the emissions allowed by any applicable standard under 40 CFR Part 60 and Part 61, as they exist on May 7, 1993, or their later enactments as adopted by reference by the director by rule. Emissions from any source utilizing clean fuels, or any other means, to comply with this paragraph shall not be allowed to increase above levels that would have been required under the definition of BACT in the Federal Clean Air Act as it existed prior to enactment of the Clean Air Act Amendments of 1990.
Best available control technology (BACT means and is applied as follows:
Examples of Best available control technology (BACT in a sentence
Best available control technology (BACT) must be evaluated for and applied to all facilities subject to the TCAA.
Best available control technology (BACT) shall be determined on a case-by-case basis and may constitute application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment, clean fuels, or innovative fuel combustion techniques, for control of such pollutant.
Best available control technology (BACT) shall be substituted for lowest achievable emission rate (LAER) for all major modifications under this section.
TABLE 1 Historic System Operations at Site D Date Action 11/84-2/85 Pilot study conducted.1/29/86 Full-scale system started up with 20 of 39 vents partially open.3/6/86 System shut down by request of the MPCA because of high VOC emissions.3/86-5/86 Need for VOC emission controls evaluated.5/6/86 Best available control technology (BACT) for VOC emissions from Site G only requested by MPCA.
Best available control technology (BACT) is the cornerstone of the program—requiring a new or expanded source to meet the most stringent emission level achievable by current technology.
More Definitions of Best available control technology (BACT
Best available control technology (BACT means an emission limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under these rules which that would be emitted from any proposed new or modified air contaminant source which the Technical Secretary, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which that would exceed the emissions allowed by any applicable standard under Chapters 0400-30-38 and 1200-03-16 or 0400-30-39 of these rules. If the Technical Secretary determines that technological or economic limitations on the application of measurement methodology to a particular class of sources would make the imposition of an emission standard infeasible, a design, equipment, work practice, or operational standard, or combination thereof, may be prescribed instead to require the application of best available control technology. Such standard shall must, to the degree possible, set forth the emission reduction achievable by implementation of such design, equipment, work practice, or operation, and shall must provide for compliance by means which that achieve equivalent results. This definition does not apply to major sources and major modifications, as defined in subparagraph (4)(b) of this rule, which are subject to the provisions of paragraph (4) of this rule.
Best available control technology (BACT means the most stringent emission limitation or control technique which: has been achieved in practice for such category or class of source;or is contained in any state implementation plan (SIP) approved by the United States Environmental Protection Agency (EPA) for such category or class of source. A specific limitation or control technique shall not apply if the owner or operator of the proposed source demonstrates to the satisfaction of the Executive Officer or designee that such limitation or control technique is not presently achievable; or is any other emission limitation or control technique, found by the Executive Officer or designee to be technologically feasible for such class or category of sources or for a specific source, and cost-effective as compared to measures as listed in the Air Quality Management Plan (AQMP) or rules adopted by the District Governing Board.
Best available control technology (BACT means an emission lim- itation based on the maximum degree of reduction for each air pollu- tant subject to regulation under chapter 70A.((94))15 RCW emitted from or which results from any new or modified stationary source which the permitting agency, on a case-by-case basis, taking into account ener- gy, environmental, and economic impacts and other costs, determines is achievable for such stationary source or modification through applica- tion of production processes and available methods, systems, and tech- niques, including fuel cleaning, clean fuels, or treatment or innova- tive fuel combustion techniques for control of such air pollutant. In no event ((shall)) must application of the best available control technology result in emissions of any pollutants which would exceed the emissions allowed by any applicable standard under 40 CFR Part 60, Part 61, and Part 62. Emissions from any stationary source utilizing clean fuels, or any other means, to comply with this paragraph ((shall)) must not be allowed to increase above levels that would have been required under definition of BACT in the Federal Clean Air Act as it existed prior to enactment of the Clean Air Act Amendments of 1990.
Best available control technology (BACT means an emission limi- tation (including a visible emissions standard) based on the maxi- mum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or ma- jor modification which the Control Officer, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modifi- cation through application of production processes or available me- thods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of BACT result in emissions of any pollu- tant which would exceed the emissions allowed by any applicable standard under 40 CFR Part 60 or 61. If the Control Officer deter- mines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equip-
Best available control technology (BACT means an emission limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under the 1990 amendments to the Federal Clean Air Act or the Clean Air Act of Montana that would be emitted from any proposed stationary source or modification that the department, on a case by case basis, taking into account energy, environmental and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event may application of BACT result in emission of any pollutant that would exceed the emissions allowed by the applicable standard under 40 CFR Part 60 and 61. If the department determines that technological or economic limitations on the application of measurement methodology to a particular class of sources would make the imposition of an emission standard infeasible, it may instead prescribe a design, equipment, work practice or operational standard or combination thereof, to require the application of BACT. Such standard must, to the degree possible, set forth the emission reduction achievable by implementation of such design, equipment, work practice or operation and must provide for compliance by means which achieve equivalent results.
Best available control technology (BACT means an emission limitation and/or other controls to include design, equipment, work practice, operation standard or combination thereof, based on a maximum degree of reduction of each pollutant subject to regulation under the Clean Air Act and/or the Utah Air Conservation Act emitted from or which results from any emitting installation, which the Air Quality Board, on a case-by-case basis taking into account energy, environmental and economic impacts and other costs, determines is achievable for such installation through application of production process and available methods, systems and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of each such pollutant. In no event shall application of BACT result in emission of pollutants which will exceed the emissions allowed by section 111 or 112 of the Clean Air Act.”
Best available control technology (BACT means “best available control technology” as defined in RSA 125-C:10-b, I(a), as reprinted in Appendix C;