Seal coat definition

Seal coat means a non-structural road surface treatment designed to increase pavement life, such as a chip seal or a slurry seal.
Sample 1Sample 2
Seal coat means a nonstructural road surface treatment designed to increase pavement life, such as a chip seal or a slurry seal.
Sample 1Sample 2
Seal coat means a thin liquified asphalt surface treatment used to waterproof and improve the texture of an asphaltwearing surface.
Sample 1Sample 2

Examples of Seal coat in a sentence

  • Seal coat aggregates shall be drained of free moisture and dust free before use.

  • Seal coat and surface treatment pavements are exempt from the two week requirement stated in short-term operations.

  • Seal coat pavements may be used on minor roads if the structural section is adequate for the Traffic index and soil conditions.

  • Seal coat shall be constructed according to a quality control plan, QCP, prepared and submitted by the Contractor in accordance with ITM 803; Contractor Quality10 Control Plan for Seal Coat.

  • Seal coat, tack coat, slurry seal, or fog seal operations shall not begin if precipitation is predicted for the application or the curing period.

  • Seal coat will be paid for at the contract unit price per square yard complete in place.

  • Pipe and fittings shall be cement lined in accordance with AWWA C104/ANSI/AWWA C104/A21.4. Seal coat is not required.

  • Seal coat, Asphalt Paving, Concrete Paving, Striping, Signage, or other pavement services.

  • Pipe and fittings shall be cement lined in accordance with AWWA C 104/ANSI/AWWA C 104/A21.4. Seal coat is not required.

  • Seal coat material submittal without required friction performance will not be approved.


More Definitions of Seal coat

Seal coat means an application of bituminous binder sprayed on the surface of the paving course. (§ 1, Ord. 87-662, eff. June 4, 1987)
Sample 1

Related to Seal coat

  • Single coat means one film coating applied to a metal surface.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • factory means any premises including the precincts thereof—

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Tire means a continuous solid or pneumatic rubber covering encircling the wheel of a tractor or other farm machinery or of a vehicle.

  • Tube means an x-ray tube, unless otherwise specified.

  • Warehouser means any person, other than a wholesale distributor, engaged in the business of

  • Shipping container means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Modular home means a modular unit as defined in Section 15A-1-302.

  • Fabrication means making up data or results and recording or reporting them.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Warehouse means a person engaged in the business of storing goods for hire.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Superstructure means the part of the bodywork which contributes to the strength of the vehicle in the event of a roll-over accident.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.