Surface water standards definition

Surface water standards means surface water standards as established in 15A NCAC 02B .0200.
Sample 1Sample 2Sample 3

Examples of Surface water standards in a sentence

  • Surface water standards also require the approval of the Environmental Protection Agency to become effective.

  • Surface water standards are not established for TPH; therefore, the groundwater cleanup levels for TPH-G, TPH-D, and TPH-O were selected as protective cleanup goals at this time.

  • Surface water standards and guidance values are calculated for some inorganics based on water hardness.

  • Surface water standards for potential bioaccumulation of chemicals in aquatic organisms and subsequent human consumption of these organisms were not directly considered in the selection of groundwater screening levels for potential aquatic habitat impacts.

  • The Samples will then be tested and compared with the Surface water standards that are presently in place in Ireland and are contain in the ‘European Communities Environmental Objectives (Surface Water) Regulations 2009 – S.I. No. 272 of 2009, as amended’.

  • There is an application for this regulation that replaces TCVN 5942:1995 – Water quality – Surface water standards in List of Vietnamese compulsory standards on Environment, which is promulgated and enclosed with Decision No.35/2002/QĐ-BKHCNMT dated 25 June 2002 by Minister of Science, Technique and Environment.

  • Surface water standards are presented in Table 2-4 and are based on the designated use for each surface water body.

  • Surface water standards rather than drinking water standards were used because groundwater at OU NSC is not potable due to the influence of seawater.

  • Surface water standards from the State of New Mexico are presented in Table 3-3 for those constituents that are identified as groundwater quality constituents of concern at the HMC- Grants Site (Section 2.1) Table 3-3.

  • Surface water standards protect surface water for a variety of uses and include health related criteria for fish consumption and water supply.

Related to Surface water standards

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).

  • Clean air standards, as used in this clause means:

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Occupational Health and Safety Act means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993);

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Occupational Safety and Health Law means any Legal Requirement designed to provide safe and healthful working conditions and to reduce occupational safety and health hazards, including the Occupational Safety and Health Act, and any program, whether governmental or private (such as those promulgated or sponsored by industry associations and insurance companies), designed to provide safe and healthful working conditions.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Universal waste transporter means a person engaged in the off-site transportation of universal waste by air, rail, highway, or water.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • Agricultural waste means biomass waste materials capable of decomposition that are produced from the

  • Data Protection Laws and Regulations means all laws and regulations, including laws and regulations of the European Union, the European Economic Area and their member states, Switzerland and the United Kingdom, applicable to the Processing of Personal Data under the Agreement.

  • Cathodic protection means a technique designed to prevent the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. For example, protection can be accomplished with an impressed current system or a galvanic anode system.

  • Waste Disposal Site means a Waste Disposal Site which is not a Hauled Sewage Disposal Site, a Sewage Works or a Waste Stabilization Pond; and

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;