Tenant Installation Allowance definition

Tenant Installation Allowance means the sum of money contributed by Redefine, in its sole discretion, to the Tenant towards the costs of fitting out the leased premises.

Examples of Tenant Installation Allowance in a sentence

  • The Value in respect of the Benefits can, at the Tenant’s election, be utilised towards any of the following items, or a combination thereof, in respect of the leased premises: 🡒 Tenant Installation Allowance 🡒 Furniture 🡒 IT cabling 🡒 Relocation costs 🡒 A rent-free period of 50% (fifty percent) of the first two years of the lease period 🡒 A combination of the above.

  • Closing date, 5.4.90.D ocum ents for tenders R 25/1/LC/1/90 and R/25/HCL/2/90 are Obtainable from the Purchasing M anager, Cotton M arketing Board, Second Floor, Kurima House, Baker Avenue/Third and Fourth Streets, Harare or P.O. Box 2697, Harare.6670 : 0436.

  • Every Tenant Installation Allowance offered by the Landlord is subject to negotiation and is dependent on the rental amounts payable and the lease period but it is generally one month’s gross rental per year on a 3 to 5 year Lease Agreement for office space.

  • In the event that the Tenant elects to participate in the Promotion and, as a Benefit, elects a Tenant Installation Allowance, the provisions of the clause (Tenant Installation Allowance) in the lease shall apply to the Tenant.

  • Every Tenant Installation Allowance offered is subject to negotiation and is dependent on the rental level and lease period but is typically one month’s gross rental per year signed based on a three to five year lease on office space.

  • In the event that the Tenant elects to participate in the Promotion and, as a Benefit, elects a Tenant Installation Allowance, the provisions of the clause(Tenant Installation Allowance) in the lease shall apply to the Tenant.

  • Nighttime coverage is provided by certain bus routes and the on-campus Red Eye Shuttles.

  • The sum of the Tenant Installation Allowance and the items to which it applies shall be in the sole discretion of Growthpoint.

  • The bidder agrees to provide a Tenant Installation Allowance of an amount equal to 10% of the Total Cost of the contract (VAT included).

  • Tenant Installation Allowance shall mean the sum of money contributed by Growthpoint towards the costs to be incurred by the Tenant to fit out the lease premises.

Related to Tenant Installation Allowance

  • Tenant Improvement Allowance in the maximum amount of $200.00 per rentable square foot in the Premises, which is included in the Base Rent set forth in the Lease; and

  • Tenant Improvements Defined in Exhibit B, if any.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Tenant’s Work means all improvements, alterations, fixture, equipment, and signage installation, and furniture placement necessary or appropriate for the conduct of the Permitted Use, including all work described as Tenant’s Work on Exhibit D, attached (the “Work Letter”).

  • Major Alteration means change other than repair or replacement of building materials or equipment with materials and equipment of a similar type.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • SO2 Allowance means “allowance” as defined at 42 U.S.C. § 7651a(3): “an authorization, allocated to an affected unit by the Administrator of EPA under Subchapter IV of the Act, to emit, during or after a specified calendar year, one ton of sulfur dioxide.”

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Building Work has the meaning given to it in section 6 of the Building and Construction Industry (Improving Productivity) Act 2016 (Cth);

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Utility Allowance means a monthly allowance, as provided by the local public housing authority or as otherwise allowed by HUD rules and the GLO rules, for utilities and services (excluding telephone services) to be paid by the tenant. Contextual Note: Unless the context clearly indicates otherwise, an above definition for a singular term shall also apply (where appropriate) to the plural form of such term and vice versa to the extent necessary for giving the proper meanings to the terms defined in this Article II and/or terms otherwise used in this Agreement.

  • Landlord Work means the work, if any, that Landlord is obligated to perform in the Premises pursuant to a separate agreement (the “Work Letter”), if any, attached to this Lease as Exhibit C.

  • Base Building Work means the base building work for the Building as described in this Manual.

  • Tenant Work All work installed or furnished to the Premises by Tenant in connection with Tenant’s initial occupancy pursuant to Rider 2 and the Workletter.

  • On-premises sign means a sign advertising activities conducted or maintained on the property on which it is located. The boundary of the property shall be as determined by tax rolls, deed registrations, and apparent land use delineations. If a sign consists principally of brand name or trade name advertising and the product or service advertised is only incidental to the principal activity conducted or maintained on the property, or if the sign brings rental income to the property owner or sign owner, it shall be considered the business of outdoor advertising and not an on-premises sign. On-premises sign does not include a sign on a narrow strip of land contiguous to the advertised activity, or a sign on an easement on adjacent property, when the purpose is clearly to circumvent the intent of this act.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Landlord’s Work means the work of constructing the Tenant Improvements.

  • Tenant Inducement Costs shall not include loss of income resulting from any free rental period, it being agreed that Seller shall bear the loss resulting from any free rental period until the date of Closing and that Purchaser shall bear such loss from and after the date of Closing.

  • this Tenant Work Letter means the relevant portion of Sections 1 through 6 of this Tenant Work Letter.