Thermal Analysis definition

Thermal Analysis means an analytical technique where the contents of the sorbent traps are analyzed using a thermal technique (desorption or combustion) to release the captured Hg in a detectable form for quantification.
Sample 1Sample 2Sample 3
Thermal Analysis means the computation of the distance from the center of a fireball that a criterion thermal radiation dose extends subsequent to specific release/ignition scenarios of a flammable substance.
Sample 1Sample 2Sample 3

Examples of Thermal Analysis in a sentence

  • Differential Thermal Analysis (DTA): Principle, instrumentation 10 Hrs 10 Hrs 10 Hrs 10 Hrs and advantage and disadvantages, pharmaceutical applications, derivative differential thermal analysis (DDTA).

  • Differential Thermal Analysis (DTA): Principle, instrumentation and advantage and disadvantages, pharmaceutical applications, derivative differential thermal analysis (DDTA).

  • Test Method for Oxidative Induction Time of Polyolefins by Thermal Analysis.

  • Differential Thermal Analysis (DTA): Principle, instrumentation Hrs 10 Hrs 10 Hrs 10 Hrs and advantage and disadvantages, pharmaceutical applications, derivative differential thermal analysis (DDTA).

  • Standard Test Method for Determining Vapor Pressure by Thermal Analysis.

  • Attachment and Texture and Stress Attachment Unit• Air Vacuum Induction Melting System• Hitachi Scanning Electron Microscope• Simultaneous Thermal Analysis System• R/S SST Plus with Coaxial Cylinder Rheometer• Atomic Absorption Unit AVANTAP• Carbon Sulphur Analyser• High Temp.

  • Endo, Element Free Galerkin Method for Transient Thermal Analysis of Carbon Nanotube Composites, Thermal Science, Vol.

  • P.A., Dembsey, N.A. and Bill, R.G., “Ignition and Burning Behavior at High Heating Rates (Applied Heat Flux Levels), Presented at 2006 NATAS Conference, North American Thermal Analysis Society 34th Annual Conference, Holiday Inn University Plaza Hotel, Bowling Green, KY, USA, 6-9 August (2006).

  • Dembsey, N.A. and Bill, R.G., “Ignition and Burning Behavior at High Heating Rates (Applied Heat Flux Levels), in Proceedings of 2006 NATAS Conference, North American Thermal Analysis Society 34th Annual Conference, Holiday Inn University Plaza Hotel, Bowling Green, KY, USA, 6-9 August (2006).

  • Endo, Thermal Analysis of CNT-Based Nano-Composites by Element Free Galerkin Method, Computational Mechanics, Vol.

Related to Thermal Analysis

  • risk analysis the analysis required under Rule 17f-7(a)(1)(i)(A).

  • Market Analysis means a technique used to identify market characteristics for specific goods or services “National Treasury” has the meaning assigned to it in section 1 of the Municipal Finance Management Act, 2003 (Act No. 56 of 2003);

  • Forensic analysis means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

  • Credential analysis means a process or service by which a third party affirms the validity of an identity document described in section 25(6)(c) through a review of public and proprietary data sources conducted remotely.

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • Sample means urine, blood, breath, saliva, or hair.

  • Comprehensive resource analysis means an analysis including,

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Certificate of Analysis means a document signed by an authorized representative of Manufacturer, describing Specifications for, and testing methods applied to, Product, and the results of testing.

  • Asset adequacy analysis means an analysis that meets the standards and other requirements referred to in 5.34(5)“d.”

  • API means the American Petroleum Institute.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Guaranteed analysis means the minimum percentage of each plant nutrient guaranteed or claimed to be present.

  • Stability (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.

  • Operating Statement Analysis Report format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Biodiesel fuel means a renewable, biodegradable, mono alkyl ester combustible liquid fuel derived from agricultural plant oils or animal fat such as, but not limited to, soybean oil. For purposes of this definition, “biodiesel fuel” must also meet the specifications of American Society for Testing and Material Specifications (ASTM) D 6751-02, “Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels,” and be registered with the U.S. Environmental Protection Agency as a fuel and a fuel additive under Section 211(b) of the Clean Air Act, 42 U.S.C. Sections 7401, et seq. as amended through November 15, 1990.

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • CREFC® Operating Statement Analysis Report The monthly report in the “Operating Statement Analysis Report” format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Development Report means a written account of Licensee’s progress under the Development Plan having at least the information specified on Appendix B to this Agreement, and shall be sent to the address specified on Appendix B.

  • Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.