Thermal System Insulation Asbestos Containing Material means thermal system insulation which contains greater than 1 percent asbestos.
Asbestos-containing material or “ACM” means asbestos or any material containing more than one percent (1%) asbestos as determined using methods specified in 40 CFR 763, Subpart E, Appendix E, Section I, Polarized Light Microscopy* including Category I and Category II ACM and all friable material.
Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.
Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.
Friable asbestos material means any material that contains more than 1% asbestos by weight and that can be crumbled, pulverized, or reduced to powder when dry, by hand pressure.
Polystyrene foam means blown polystyrene and expanded and
explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;
Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.
Radioactive material means any solid, liquid, or gas which emits radiation spontaneously.
Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).
Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.
Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:
Geothermal fluid means water in any form at temperatures greater than 120
Airborne radioactive material means any radioactive material dispersed in the air in the form of dusts, fumes, particulates, mists, vapors, or gases.
Radioactive marker means radioactive material placed subsurface or on a structure intended for subsurface use for the purpose of depth determination or direction orientation.
Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.
Airborne radioactivity area means a room, enclosure, or area in which airborne radioactive materials, composed wholly or partly of licensed material, exist in concentrations:
Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,
Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.
Radioactive waste means any waste which contains radioactive material in concentrations which exceed those listed in 10 CFR Part 20, Appendix B, Table II, Column 2.
High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).
Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.
Additives means non-hydrocarbon compounds added to or blended with a product to modify its properties;
Explosive material means any chemical compound, mixture, or device which produces a substantial instantaneous release of gas and heat spontaneously or by contact with sparks or flame.
Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.
Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.
combustible waste means non-biodegradable, non- recyclable, non-reusable, non-hazardous solid waste having minimum calorific value exceeding 1500 kcal/kg and excluding chlorinated materials like plastic, wood pulp, etc.;