Total Moisture definition

Total Moisture means the total moisture content (including surface moisture) expressed as percentage present in Coal and determined on as delivered basis in pursuance to IS.
Sample 1Sample 2Sample 3
Total Moisture means the total moisture content (including Surface Moisture) expressed as
Sample 1Sample 2Sample 3
Total Moisture means the total moisture content (including Surface Moisture) expressed as percentage present in Coal and determined on “as delivered basis” in pursuance to IS: 1350 (Part – I) - 1984.
Sample 1Sample 2Sample 3

Examples of Total Moisture in a sentence

  • One portion (one fourth of the gross sample) called Part - 1 shall be used for analysis of Total Moisture and the other portion (three fourth of the gross sample) called Part - 2 for determination of ash, moisture and GCV on Equilibrated Basis.

  • One portion (one fourth of the gross sample) called Part – 1 will be used for analysis of Total Moisture and the other portion (three fourth of the gross sample) called Part – 2 for determination of ash, moisture and GCV on Equilibrated Basis.

  • One portion (one fourth of the Gross Sample) called Part-1 will be used for analysis of Total Moisture and the other portion (three fourth of the Gross Sample) called Part-2 for determination of ash, moisture and GCV on Equilibrated basis .

  • Total Moisture determination shall be done by the TPA as per applicable laboratory and remaining tests/ analysis for determination of moisture, ash, GCV on equilibrated Basis shall be done by the TPA at NABL-accredited laboratory/designate laboratory.

  • Similar to the vortex forecasting motivated by air traffic safety, attention is paid to the interactions of vortices with the ground boundary layer [41] and atmospheric conditions, such as crosswind.

  • ASTM standards D2234–89, Standard Test Meth- ods for Collection of a Gross Sample of Coal; D3302–91, Standard Test Method for Total Moisture in Coal; and, D1412–93, Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Rel- ative Humidity and 30 °C are incor- porated by reference as published in the 1994 Annual Book of ASTM Stand- ards, Volume 05.05.

  • One portion (one fourth of the Gross Sample) called Part-1 will be used for analysis of Total Moisture and the other portion (three fourth of the Gross Sample) called Part-2 for determination of ash, moisture and GCV on Equilibrated basis.

  • Sample will be taken from each rake and the parameters like GCV, Total Moisture and Volatile Matter will be evaluated on the basis of coal received at Thermal Power Stations.

  • The decrease in Total Moisture below the Base value shall be ignored.

  • One portion (one fourth of the Gross Sample) called Part-1 will be used for analysis of Total Moisture and the other portion (three fourth of the Gross Sample) called Part-2 for determination of ash, moisture and GCV on Equilibrated basis2.


More Definitions of Total Moisture

Total Moisture means the total moisture content (including surface moisture) expressed as percentage present in Coal and determined on as delivered basis in pursuance to IS. oo) Tapering Linakge : is the ‘short term’ linkage which is provided to the coal consumers, who have been allotted captive coal block(s), for meeting coal reuirements of its linked End Use Plant (s) (EUP) in such cases where the development/production of coal block(s) allocated for this particular EUP is not synchronized with the operational/requirement of coal of the EUP
Sample 1Sample 2
Total Moisture. Less than or equal to 17.0% Ash: Less than or equal to 5.50% Sulfur: Less than or equal to 0.80% Oxidation Greater than or equal to 80.0% Flowablity Free flowing - Non-clumping
Sample 1
Total Moisture means the total moisture content (including surface moisture) expressed as percentage present in coal and determined on as delivered basis in pursuance to IS.
Sample 1

Related to Total Moisture

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Residual disinfectant concentration (“C” in CT cal- culations) means the concentration of disinfectant measured in mg/l in a representative sample of water.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Maximum residual disinfectant level or “MRDL” means a level of a disinfectant added for water treatment that may not be exceeded at the consumer’s tap without an unacceptable possibility of adverse health effects.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Overall width of a vehicle means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In the case of vehicles of category other than M1, in addition to the provisions of that standard, when measuring the vehicle width the following devices shall not be taken into account:

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Exceedance means a condition that is detected by monitoring that provides data in terms of an emission limitation or standard and that indicates that emissions (or opacity) are greater than the applicable emission limitation or standard (or less than the applicable standard in the case of a percent reduction requirement) consistent with any averaging period specified for averaging the results of the monitoring.