Examples of Toxicity Characteristic Leaching Procedure in a sentence
Submit the name and qualifications of the laboratory proposed for Toxicity Characteristic Leaching Procedure (TCLP) analysis.
Soluble chromium by Toxicity Characteristic Leaching Procedure From the 1st 220 gallons of hazardous waste or portion thereof if less than 220 gallons of hazardous waste are produced, a minimum of 4 randomly selected samples must be taken and analyzed individually.
If the total amount of a pollutant exceeds the 20X TCLP screening value, then the leachable amount must be determined using the Toxicity Characteristic Leaching Procedure (TCLP).
Sample analysis will include at a minimum, Total Threshold Limit Concentration (TTLC), Soluble Threshold Limit Concentration (STLC) and Toxicity Characteristic Leaching Procedure (TCLP).
Toxicity Characteristic Leaching Procedure (TCLP) results (Pass/Fail).
It does not exhibit the hazardous characteristics of ignitability, corrositivity or reactivity and is not formulated with contaminants as determined by the Toxicity Characteristic Leaching Procedure (TCLP).
As manufactured, RCF was tested using EPA’s Toxicity Characteristic Leaching Procedure (TCLP).
Any substance(s) listed in Article 11 Section 66699 at concentrations greater than their listed Soluble Threshold Limit Concentration (STLC) or Total Threshold Limit Concentration (TTLC) may need to be further characterized by the Toxicity Characteristic Leaching Procedure (TCLP) in accordance with 40 CFR 261 and other tests prior to disposal as a hazardous waste.
The contractor shall as required use a laboratory capable of performing all analysis required to determine Resource Conservation and Recovery Act (RCRA) characteristics such as, but not limited to, Toxicity Characteristic Leaching Procedure (TCLP) metals, TCLP volatile and semi- volatile organic, flashpoint, reactivity, and pH.
Sewage sludge shall be tested once during the term of this permit in accordance with the method specified in both 40 CFR Part 261, Appendix II and 40 CFR Part 268, Appendix I (Toxicity Characteristic Leaching Procedure) or other method, which receives the prior approval of the TCEQ for contaminants listed in Table 1 of 40 CFR § 261.24.