Trip Meter definition

Trip Meter means a device that, independently from the Taxicab Driver, calculates and displays a trip fare to the Passenger;
Sample 1Sample 2Sample 3

Examples of Trip Meter in a sentence

  • Trip Meter To display the trip meter, push and release the button (located at the circle in the bottom left corner) twice.

  • The display is updated once per minute.To switch between the segment display and the Trip Meter/ Odometer display, press and release the FCD Select button.

  • We noted that these factors could result in expanding repayment relief to irrigation contractors and significant, unplanned increases in the CVP power rates.

  • Details in SEM images show the porous structure of the paper at microscale.

  • An entrant is deemed to have full knowledge of the condition of his/her vehicle.It is strongly recommended that the vehicle be fitted with a Trip Meter (Odometer) reading in kilometers, which can be "zeroed" (this is usually a standard attachment) on the speedometer.

  • It is optional for the competitors to use a GPS-based Trip Meter.

  • At the Company’s option, assessment of a Trip Meter Reading Charge may be waived if Customer agrees to and permits the installation of a remote meter-reading device.

  • RESULT: The IVS stores Trip Meter data, such as, GPS coordinates of trip end location, date and time trip finished, fare amount at time of Meter Cleared event, MPTP subsidy amount, MPTP balance due, etc.

  • The tell-tales must either conform with SAE J2402, “Road Vehicles-Symbols for Controls, Indicators, and Tell-Tales,” as last revised on January 7, 2010, which is incorporated by reference herein, International Organization for Standardization (ISO) 2575, “Road Vehicles – Symbols for controls, indicators and tell-tales,” as last revised on July 1, 2010, which is incorporated by reference herein, or be approved by the Executive Officer.3.1.3 Trip Meter.

  • Hegraduated in Electrical Engineering from Queen’s University, Canada, completing his post-graduation in the same discipline from MIT.He worked for three years in North America, Dr. Kohli began working with the Tata Electric Companies as Chief Load Despatcher, and rose to the position of Deputy General Manager.

Related to Trip Meter

  • Master Meter means the meter controlled by the licensed distributor and used for settlement of the master bill with the master consumer;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Meter means a device which records the demand and/or the electrical energy consumed and includes conventional and prepayment meters;

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • interval meter means a meter that measures and records electricity use on an hourly or sub-hourly basis;

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Usage Metric means the standard of measurement for determining the permitted use and calculating the fees due for a Cloud Service as set forth in an Order Form.

  • Net metering system means a facility for the production of electrical energy that:

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Scrap metal means ferrous or nonferrous metal, or items that contain ferrous or nonferrous metal, that are sold or offered for sale for the value of the ferrous or nonferrous metal they contain rather than their original intended use; ferrous or nonferrous metal removed from or obtained by cutting, demolishing, or disassembling a building, structure, or manufactured item; or other metal that cannot be used for its original intended purpose but can be processed for reuse in a mill, foundry, die caster, or other manufacturing facility.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;

  • Taximeter means any device for calculating the fare to be charged in respect of any journey in a hackney carriage or private hire vehicle by reference to the distance travelled or time elapsed since the start of the journey, or a combination of both; and

  • CAISO Approved Meter means any revenue quality, electric energy measurement meter furnished by Seller, that (a) is designed, manufactured and installed in accordance with the CAISO’s metering requirements, or, to the extent that the CAISO’s metering requirements do not apply, Prudent Electrical Practices, and (b) includes all of the associated metering transformers and related appurtenances that are required in order to measure the net electric energy output from the Generating Facility.

  • Net metering customer means a customer of the electric distribution company