Turbidity level definition

Turbidity level means the value in NTU obtained by measuring the turbidity of a representative grab sample of water at a specified regular interval of time. If continuous turbidity monitoring is utilized, the turbidity level is the discrete turbidity value at a given time.
Sample 1Sample 2Sample 3

Examples of Turbidity level in a sentence

  • A Public Water System serving more than 1,000 people using Surface Water or Groundwater Under the Direct Influence of Surface Water which does not practice Filtration (in compliance with 310 CMR 22.20A, 22.20D, 22.20F, and 22.20G) must collect at least one total coliform sample Near the First Service Connection each day the Turbidity level of the source water, measured as specified in 310 CMR 22.20A(5)(b)2., exceeds one NTU.

  • Turbidity level" means the value in NTU obtained by measuring the turbidity of a representative grab sample of water at a specified regular interval of time.

  • Turbidity level : T 1 (T-measurement point) - input of the first sedimentation section; T 2 - exit from the first section of the sedimentation tank; T 3 - exit from the second section of the sedimentation tank; T 4 - exit from the third section of the sedimentation tank; Т 5 - receipt in a sediment bowl (the river Karakol).

  • Turbidity level was sig- nificantly higher than the standard value in all the reser- voir samples and sample taken from the vegetable wash- ing area (V) during low water level.

  • The test results agree that this solution is capable of monitoring the Turbidity level and water temperature.

  • UTOFIA System 2 tank test reportLocation: Subsea Tech - Marseilles HarbourDate: XX/11/2017Time: Test report N°: Turbidity level: XX m (measured with Secchi disk)Ambient light: XX lx (measured with luxmetre model XX) Test by: Additional tests will be performed using a Blueview BV5000 3D sonar on selected targets to compare accuracy and resolution with UTOFIA 3D mode.

  • Turbidity level is measured in Nephelometric units (NTUs) using the HACH water analysis kits (Model DR 2010).

Related to Turbidity level

  • Severity Level means the actual impact of a Defect on a user’s operational environment as further described in the table below.

  • RBC level means an insurer's company action level RBC, regulatory action level RBC, authorized control level RBC, or mandatory control level RBC where:

  • Rating Level means, with respect to any rating agency, each rating subcategory or “notch” of such rating agency , giving effect to pluses and minuses (or similar designations). By way of illustration, BBB+, BBB and BBB- are each separate Rating Levels of S&P.

  • Index Level means, in respect of any day and subject to Adjustment Provisions: (a) in respect of an Index (other than a Multiple Exchange Index), the closing level of such Index at the Valuation Time on such day; and (b) in respect of an Index that is a Multiple Exchange Index, the official closing level of the Index on such day at the Valuation Time as calculated and published by the Index Sponsor each as rounded up to four decimal places (with 0.00005 being rounded up), all as determined by the Calculation Agent.

  • Pricing Level refers to the determination of which of Level I, Level II, Level III, Level IV, Level V or Level VI applies at any date.

  • Reference Level means the level of the Index (excluding any flash estimates) published or announced by Eurostat (or any successor entity which publishes such index) in respect of the month that is 12 calendar months prior to the month referred to in “Latest Level” above.

  • Working level (WL) means any combination of short-lived radon daughters in 1 liter of air that will result in the ultimate emission of 1.3E+5 MeV of potential alpha particle energy. The short-lived radon daughters are—for radon-222: polonium-218, lead-214, bismuth-214, and polonium-214; and for radon-220: polonium-216, lead-212, bismuth-212, and polonium-212.

  • Base Level means the following amounts plus the percentage

  • Pricing Level V any time when (i) the senior unsecured long term debt rating of the Borrower by (x) S&P is BBB‑ or higher or (y) Xxxxx’x is Baa3 or higher and (ii) none of Pricing Level I, Pricing Level II, Pricing Level III or Pricing Level IV applies.

  • Floor Level means that stage of construction which in the completed building would constitute the walking surface of the particular floor level referred to in the table of payments.

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Strike Level means the Strike Level as specified in § 1 of the Product and Underlying Data.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Pricing Level I shall exist on an Adjustment Date if the Consolidated Leverage Ratio for the relevant period is greater than or equal to 3.50 to 1.00.

  • Pricing Level IV means any time when (i) no Event of Default has occurred and is continuing, (ii) the Senior Debt Rating is BBB- or higher by S&P or Baa3 or higher by Moody’s and (iii) Pricing Levels I, II and III do not apply.

  • Initial Level means, in respect of an Index, the level specified as such in the applicable Issue Terms.

  • Pricing Level II shall exist on an Adjustment Date if the Consolidated Leverage Ratio for the relevant period is less than 3.50 to 1.00 but greater than or equal to 3.00 to 1.00.

  • Mean Sea Level means the average height of the sea for all stages of the tide. It is used as a reference for establishing various elevations within the floodplain. For the purposes of this Ordinance, the term is synonymous with the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, to which Base Flood Elevations shown on a community's Flood Insurance Rate Map are referenced.

  • Integration Level means the Social Security taxable wage base for the Plan Year, unless the Employer elects a lesser amount in (A) or (B) below.

  • Ground Level means the level of the referred point of exposed surface of the ground as indicated in the drawing.

  • Маrgin Level for CFD trading shall mean the percentage of Equity to Necessary Margin ratio. It is calculated as: Margin Level = (Equity / Necessary Margin) x 100%.

  • Final Level means, in respect of the Index, the Closing Level on the Final Valuation Date, provided that, if the Final Valuation Date is not an Exchange Business Day, then the Final Level will be determined on the immediately preceding

  • Applicable Rating Level at any time and for any Borrower shall be determined in accordance with the then-applicable S&P Rating and the then-applicable Xxxxx’x Rating for such Borrower as follows: S&P Rating A or higher or Xxxxx’x Rating A2 or higher 1 S&P Rating A- or higher or Xxxxx’x Rating A3 or higher 2 S&P Rating BBB+ or Xxxxx’x Rating Baa1 3 S&P Rating BBB or Xxxxx’x Rating Baa2 4 S&P Rating BBB- or Xxxxx’x Rating Baa3 5 S&P Rating BB+ or below or Xxxxx’x Rating Ba1 or below, or no S&P Rating or Xxxxx’x Rating 6 The Applicable Rating Level for any Borrower and for any day shall be determined based upon the higher of the S&P Rating and the Xxxxx’x Rating for such Borrower in effect on such day. If the S&P Rating and the Xxxxx’x Rating are not the same (i.e., a “split rating”), the higher of such ratings shall control, unless (i) the ratings differ by more than one level, in which case the rating one level below the higher of the two ratings shall control, or (ii) either rating is below BBB- or Baa3 (as applicable), in which case the lower of the two ratings shall control.

  • Applicable Multiplier means, with respect to any Rate Period for any Series of RVMTP Shares, the percentage set forth opposite the applicable credit rating most recently assigned to such Series by the Rating Agency in the table below on the Rate Determination Date for such Rate Period: *And/or the equivalent ratings of any other Rating Agency then rating the RVMTP Shares utilizing the highest of the ratings of the Rating Agencies then rating the RVMTP Shares.

  • Margin Level means the percentage Equity to Necessary Margin ratio. It is calculated as (Equity / Necessary Margin) * 100%.

  • Maximum contaminant level goal or “MCLG” means the maximum level of a contaminant in drinking water at which no known or anticipated adverse effect on the health of persons would occur, and which allows an adequate margin of safety. MCLGs are nonenforceable health goals.