UST testing definition

UST testing means a testing method which can detect leaks in an underground storage tank system, or testing for compliance with corrosion protection requirements. Testing methods must meet applicable performance standards of 40 CFR 280.40(a)(3), 280.43(c), and 280.44(b) for tank and product piping tightness testing, 280.44(a) for automatic line leak detector testing, and 280.31(b) for cathodic protection testing.
Sample 1Sample 2Sample 3
UST testing means a testing method which can detect leaks in an underground storage tank system, or testing for compliance with corrosion protection requirements. Testing methods must meet applicable performance standards of 40 CFR 280.40(a)(3), 280.43(c),
Sample 1
UST testing means a testing method which can detect leaks in underground storage tank. Testing methods must meet applicable performance standards of 40 CFR Parts 280.40(a)(3), 280.43(c), and 280.44(b) as adopted by Section R311-202, for tank and product piping tightness testing. The testing method, at a minimum, must be able to test the underground storage tank system at the maximum level that could contain regulated substances. Tanks with overfill prevention devices that prevent product from entering the upper portion of the tank may be tested at the maximum level allowed by that device.
Sample 1

Examples of UST testing in a sentence

  • An applicant or applicant's employer shall have insurance, surety bonds, liquid company assets or other appropriate kinds of financial assurance which covers UST testing and which, in combination, represent an unencumbered value of the largest UST testing contract performed by the applicant or the applicant's employer, as appropriate, during the previous two years, or $50,000, whichever is greater.

  • An applicant shall submit documentation that demonstrates the UST testing equipment used by the applicant meets performance standards of 40 CFR Part 280.40(a)(3), 280.43(c), and 280.44(b) for tank and product piping tightness testing.

  • Director director may issue a limited certification restricting the type of UST testing the applicant can perform.

  • For this information collectionrequest, each UST testing company surveyed by the EPA research contractor will conduct the following once over the information collection period (this is not a repeat data collection).

  • Provide a summary guide for using the deliverable and the research process used to compile the data, including written records of communications with UST testing companies, where applicable.5(b) Collection Methodology and ManagementEPA will task the contractor with collecting testing data unaltered from participating companies.

  • EPA estimates there to be, on average, 40 UST testing companies within each state.

  • However, till the issue is examined, UST testing will need to be continued in SS-1.

  • Non-fiscal impacts include new types of testing in the definition of UST testing; therefore, requiring that the tests be done by certified UST testers will help ensure that tests are done by capable, trained individuals.R311.

  • Our analysis shows that UST periodicity is not uniform i.e. UST testing periodicity on IR ranges from 6 months to 24 months.

  • Note that while UST owners and operators are considered to be respondents in this information collection, they were not included in the burden calculations because the information will be sought only from UST testing companies and is collected as part of routine business operations.

Related to UST testing

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Cannabis testing facility means an entity registered by

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Stand-Alone Test Environment or "SATE" shall have the meaning set forth in Section 12.2.9.3.2.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;