Vacuum bagging definition

Vacuum bagging means any molding technique in which the reinforcing fabric is saturated with resin and then covered with a flexible sheet that is sealed to the edge of the mold and where a vacuum is applied under the sheet to compress the laminate, remove excess resin, or remove trapped air from the laminate during curing. Vacuum bagging does not include processes that meet the definition of closed molding.
Sample 1Sample 2Sample 3
Vacuum bagging means a partially closed molding technology where, after resin has been applied, a flexible cover is placed over the wet surface, sealed, and a vacuum pump is used to draw the air out from under the cover and press the cover down onto the part.
Sample 1Sample 2Sample 3
Vacuum bagging means any molding technique in which the reinforcing fabric is saturated with resin and then covered with a flexible sheet that is sealed to the edge of the mold and where a vacuum is applied under the sheet to compress the laminate,
Sample 1Sample 2

Examples of Vacuum bagging in a sentence

  • In other words, such an asset is considered uncollectable and of such little value that its continuance as a bankable asset is not warranted although there may be some salvage or recovery value.

  • Vacuum bagging, or any other method to create a laminate with a lower ratio of resin to fibre than would be achieved in the absence of such method, is prohibited.

  • Vacuum bagging efficiently removes these gases whereas pressure bagging compresses and traps them within the wrap.

  • The vacuum line is attached at the bottom of the frame as shown in Figure 3.4. Vacuum bagging is sealed along the tacky tape establishing an airtight space.

  • Vacuum bagging does not include processes that meet the definition of closed molding.

  • The Basalt and PALF reinforced epoxy resin matrix composite was fabricated by Vacuum bagging method.

  • Vacuum bagging of thicker insulation section at both ends of the hardwares.

  • Figure 2: Vacuum bagging technique performed on the molding of the composite tensile specimen.

  • ALL Construction projects must have: workers with the right skills, knowledge, training and experience; contractors providing appropriate supervision, instruction and information; a written construction Phase Plan (developed by the main contractor) – checked and retained by school.

  • Vacuum bagging was applied to the p reform wi th arranging th e r esi n dis tribution m edi a (RDM) that will keep resin path on the NCW fabric after hot compaction.

Related to Vacuum bagging

  • Incinerator means any enclosed device that:

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • washing means a process of separation by water using only size as a criterion;

  • Grease means an organic substance recoverable by procedures set forth in "Standard Methods" and includes but is not limited to hydrocarbons, esters, fats, oils, waxes and high molecular carboxylic acids;

  • Cheating means intentionally to misrepresent the source, nature, or other conditions of academic work so as to accrue undeserved credit, or to cooperate with someone else in such misrepresentation. Such misrepresentations may, but need not necessarily, involve the work of others. Cheating includes, but is not limited to:

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Fireworks means consumer fireworks, display fireworks, and pyrotechnic special effects fireworks;

  • Propeller means for a device for propelling an aircraft that has blades on a powerplant driven shaft and that, when rotated, produces by its action on the air, a thrust approximately perpendicular to its plane of rotation and it includes control components normally supplied by its manufacturer, but does not include main and auxiliary rotors or rotating airfoils of powerplants;

  • Containers means any ISO standard container(s) with a maximum height of 9’6” including any reefer and/or other special containers, provided they meet ISO standards.