Verification Test Program definition

Verification Test Program has the meaning set forth in Section 5.3(a).
Sample 1Sample 2Sample 3

Examples of Verification Test Program in a sentence

  • Do not provide Cabinet Verification Test Program software or associated test jigs as specified in LA Specification No. 54-053-08.Furnish unpainted, natural, aluminum cabinet shells.

  • There is a system in place for GPs to give a pertinent summary of all relevant medical information (excluding information of a sensitive or irrelevant nature) by way of an industry approved General Practitioner’s Report (GPR).

  • The proportion of infants’ deaths where the infant was identified as Indigenous has ranged from 37% to 50% between 2009-11 and 2015-17.

  • Therefore further investigation, is needed and will be done in the following Verification Test Program 1 (May 2012) according to the GRPE HDH road map.

  • Phase ReviewDefine System Requirements ReviewDesign:System Preliminary Design ReviewDesign:Software/Data Base Critical Design reviewCode & Unit Test Peer Code ReviewsIntegration & System Level Testing System Verification Test Program source code listings generated during this phase will be subjected to extensive internal reviews by peers of the code developers.

  • Alberta Transportation WIM Verification Test Program To verify the accuracy of the WIM measurements, a five-axle semi-trailer (Federal Highway Administration [FHWA] Class 9) truck drove 10 times (10 “passes”) over the WIM system in each lane at each highway location at posted highway speeds on a monthly basis.

  • Therefore further investigation, named by working tasks in the upcoming chapter, is needed and will be done in following Verification Test Program 1 (May 2012) according to GRPE HDH road map.

  • This will provide an incentive for contractors to register themselves to be able to operate in the labour market.

  • REFERENCESProceduresTest Procedure, S0123-1-4.7, Molded Case Circuit BreakersTest Procedure, S0123-GT-400-07Generic Test Procedure for Molded Case Circuit BreakersTest Procedure, S023-302-4-1-785-0Westinghouse Molded Case Circuit BreakersVerification Test Procedure, VTP-E-067,Molded Case Circuit Breaker Verification Test Program Drawings90042, Unit 2/3 Safety Related Electrical Set Point List(ESL), QC II, REV.

  • REFERENCESProceduresTest Procedure, S0123-I-4.7, Molded Case Circuit BreakersTest Procedure, S0123-GT-400-07Generic Test Procedure for Molded Case Circuit BreakersTe Procedure, S023-302-4-1-785-0Wedeinghouse Molded Case Circuit BreakersVerification Test Procedure, VTP-E-067,Molded Case Circuit Breaker Verification Test Program DrawingsM-89030, Unit 1 Safety Related Electrical Set Point List(ESL), REV.

Related to Verification Test Program

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Confirmation test means a drug or alcohol test on a sample to substantiate the results of a prior drug or alcohol test on the same sample and which uses different chemical principles and is of equal or greater accuracy than the prior drug or alcohol test;

  • Verification Report As defined in Section 4.19.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Independent Verification means that an evaluation is undertaken and reported by an individual or body whose organisation, systems and procedures conform to ISO Guide 65:1996 (EN 45011:1998) General requirements for bodies operating product certification systems (as amended form time to time) or equivalent, and who is accredited to audit against forest management standards by a body whose organisation, systems and procedures conform to ISO 17011: 2004 General Requirements for Providing Assessment and Accreditation of Conformity Assessment Bodies (as amended from time to time) or equivalent.

  • Performance and Guarantee Tests , shall mean all operational checks and tests required to determine and demonstrate capacity, efficiency, and operating characteristics as specified in the Contract Documents.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Performance and Guarantee Test means all operational checks and tests required to determine and demonstrate capacity, efficiency and operating characteristics as specified in the Contract Documents.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Verification system means the system maintained by the department under section 19-24.1-31 for verification of registry identification cards.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Collateral Quality Tests means the Collateral Quality Tests set out in the Investment Management Agreement being each of the following:

  • Guarantee Test(s means the test(s) specified in the Technical Specifications to be carried out to ascertain whether the Facilities or a specified part thereof is able to attain the Functional Guarantees specified in the Technical Specifications in accordance with the provisions of GCC Sub-Clause 20.2.1 (Guarantee Test) hereof during/after successful Commissioning followed by Trial - Operation.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.