Wafer Lot definition

Wafer Lot means a batch or lot of Wafers that are processed at the same time. Each Wafer Lot (or number of Die as converted to Wafers) to be Ordered by LSI and processed by SCI for LSI and its Subsidiaries will consist of a minimum of 24 Wafers, except as other wise provided in this agreement in Section 5.6(c).
Sample 1Sample 2Sample 3
Wafer Lot. A lot of wafers started together using the same lot number and processed through wafer fabrication as a single group.
Sample 1
Wafer Lot means 25 Wafers; provided that, this number may be changed by written Agreement of the parties.
Sample 1

Examples of Wafer Lot in a sentence

  • Copies of SEM photographs shall be supplied with the Wafer Lot Acceptance Report as part of a Space Data Pack when specified as a customer purchase order line item.

  • All Lots delivered by HSA shall be subject to incoming inspection and testing on a monitoring basis by CUSTOMER in accordance with the Wafer Lot acceptance criteria set forth in herein.

  • This specifically includes S-level processing including SEM step coverage, as outlined in SP34061 and Wafer Lot Acceptance as outlined in SP3402.

  • For the purposes of this Agreement, “Epidemic Failure” will be deemed to have occurred if more than [*] of any Wafer Lot, shipment, or Order should fail in substantially the same manner.

  • LSI will have the right, in its discretion, to have SCI perform expedited processing for any or all of the process steps in the production of a Wafer Lot.

  • If the yield or defect density of the Wafers and/or any Wafer Lot for any Product are at or below the Minimum Die Yield (as defined in Attachment F) for such Product, LSI will have the right to reject the Wafers and/or the entire Wafer Lot, at no cost to LSI.

  • In addition, SCI will promptly reimburse LSI for any reasonable expedite charges, late charges, or similar costs or expenses incurred by LSI as a result of SCI’s failure to meet the On-Time Delivery requirements for any Product, up to a total amount of [*] per Wafer Lot.

  • SEM is performed per MIL-STD-883, Method 2018 and copies of SEM photographs shall be supplied with the Wafer Lot Acceptance Report as part of a Space Data Pack when specified as a customer purchase order line item.

  • No mixed production lots will be packed in the same container, and a label will be attached to each container containing information with CSMC Wafer Lot identification and APT die type as a minimum.

  • Polar and Customer will mutually agree on the Wafer Lot Size and whether or not any Wafer lots will be split lots.


More Definitions of Wafer Lot

Wafer Lot means 25 Wafers; and
Sample 1
Wafer Lot means a group of Wafers processed together.
Sample 1
Wafer Lot see Exhibit C.
Sample 1

Related to Wafer Lot

  • Harvest lot means a specifically identified quantity of marijuana that is, cultivated utilizing the same growing practices and harvested within a 72 hour period at the same location and cured under uniform conditions.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Cannabis testing facility means an entity registered by

  • Finished Lots Entitled Land with respect to which (a) development has been completed to such an extent that permits to allow use and construction, including building, sanitary sewer and water, are entitled to be obtained for a Unit on such Entitled Land and (b) start of construction has not occurred.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Manufactured dwelling park means a place where four or more manufactured dwellings

  • Manufactured dwelling means a residential trailer, a mobile home or a manufactured

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Contributory drainage area means the area from which stormwater runoff drains to a stormwater management measure, not including the area of the stormwater management measure itself.

  • Non-surgically implanted prostheses means a replacement body part not surgically implanted.

  • Aquatic invasive species means any invasive, prohibited,

  • Corner lot means a lot situated at the intersection of and abutting upon two streets, or upon two parts of the same street, the adjacent sides of which street or streets (or, in the case of a curved corner, the tangents at the street extremities of the side lot lines) contain an angle of not more than one hundred and thirty-five (135) degrees. In the case of a curved corner, the corner of the building lot shall be that point on the street line nearest to the point of intersection of the said tangents.

  • Maximum allowable cost list means a list of drugs for

  • Maximum allowable residential density means the density allowed under the zoning ordinance and land use element of the general plan, or if a range of density is permitted, means the maximum allowable density for the specific zoning range and land use element of the general plan applicable to the project. Where the density allowed under the zoning ordinance is inconsistent with the density allowed under the land use element of the general plan, the general plan density shall prevail.

  • Accelerator-produced material means any material made radioactive by a particle accelerator.

  • Small Diversity business concern means a small business concern that is at least fifty-one (51) percent unconditionally owned by one or more individuals who are both socially and economically diverse, or a publicly owned business that has at least fifty-one (51) percent of its stock unconditionally owned by one or more socially and economically diverse individuals and that has its management and daily business controlled by one or more such individuals. This term also means a small business concern that is at least fifty-one (51) percent unconditionally owned by an economically diverse Indian tribe or Native Hawaiian Organization, or a publicly owned business that has at least fifty-one (51) percent of its stock unconditionally owned by one of these entities, that has its management and daily business controlled by members of an economically diverse Indian tribe or Native Hawaiian organization.

  • Behind The Meter Generation shall refer to a generation unit that delivers energy to load without using the Transmission System or any distribution facilities (unless the entity that owns or leases the distribution facilities has consented to such use of the distribution facilities and such consent has been demonstrated to the satisfaction of the Office of the Interconnection); provided, however, that Behind The Meter Generation does not include (i) at any time, any portion of such generating unit’s capacity that is designated as a Generation Capacity Resource; or (ii) in an hour, any portion of the output of such generating unit that is sold to another entity for consumption at another electrical location or into the PJM Interchange Energy Market.

  • Half-value layer (HVL) means the thickness of specified material which attenuates the beam of radiation to an extent such that the exposure rate is reduced to one-half of its original value. In this definition the contribution of all scattered radiation, other than any which might be present initially in the beam concerned, is deemed to be excluded.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Improvement warranty period means a period:

  • Stored-value card means a record evidencing a promise made