Water Quality Parameter definition

Water Quality Parameter means one of the indicators available for describing the distinctive quality of water including, but not limited to, hardness, pH, or temperature.
Sample 1Sample 2
Water Quality Parameter means any parameter used to describe the quality of water, stormwater or wastewater.
Sample 1
Water Quality Parameter means any parameter used to describe the quality of water, stormwater or wastewater. Prohibited Discharge to Sanitary Building Sewer
Sample 1

Examples of Water Quality Parameter in a sentence

  • Creating a flatter and more flexible organization capable of responding more quickly to change.

  • Specification of the management regimes to ensure the ongoing maintenance of fire trails to a reasonable standard (where they are located on the subject land) that will be undertaken by, and the responsibility of, the future Owners’ Association.

  • Lead and Copper; Water Quality Parameter Monitoring Repealed R18-4-312.

  • Table 2.4 Factors affecting corrosion of desalinated water Water Quality Parameter SignificancepH Low pH (typically below 7.0) may increase corrosion ratesHigh pH (typically above 8.0, but not excessively) may reduce corrosion rates Alkalinity Provides water stability and prevents variations in pH May contribute to the deposition of protective filmsHighly alkaline water may cause corrosion in lead and copper pipes.

  • Lake St. Croix Minnesota and Wisconsin Standards and Basin Team's Goals Water Quality Parameter The MPCA’s projected schedule for TMDL completions, as indicated on the 303(d) impaired waters list, implicitly reflects Minnesota’s priority ranking of this TMDL.

  • Ahmadi (2014), Spatial and Temporal Variability of In-Stream Water Quality Parameter Influence on Dissolved Oxygen and Nitrate within a Regional Stream Network.

  • Drinking water at DU meets standards of the World Health Organization and the Environment Conservation Rules 1997, Schedule 3(B) Rule 12.Table 4.5: Result of Drinking Water Analysis Water Quality Parameter Unit of Measure Allowable LimitSampling Station: Project Site, West Polashi Campus– = not applicable, BDL = below detectable limit, mg/l = milligrams per liter, ml = milliliter, n = number, WHO = World Health Organization.Note: Date of sampling: 30 March 2019.

  • CWSs can use this form to report the results of any Water Quality Parameter monitoring.• CCR Certificate of Distribution.• EGLE Water Sampling 101 – Thermal Preservation video.• Noncommunity seasonal system certification form and instructions.Methods and additional opportunities to communicate PWS monitoring and reporting requirements include:• Efforts to remind water supplies of reporting deadlines before violations were issued.• Distribution and entry point monitoring reminder letters.

  • The document makes a distinction between two main objectives: • contributing to strengthening the socio-economic position of Enschede by retaining and attracting more higher income groups to the city; • increasing the quality of housing for all residents, with the consumer’s wishes as the central consideration.

  • Water Quality Parameter Testing Parameter One utility performed basic water quality parameter testing in the field and transmitted the data using hand-held digital assistants.

Related to Water Quality Parameter

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Water quality means the physical characteristics of water within shoreline jurisdiction, including water quantity, hydrological, physical, chemical, aesthetic, recreation-related, and biological characteristics. Where used in this chapter, the term "water quantity" refers only to development and uses regulated under this chapter and affecting water quantity, such as impermeable surfaces and storm water handling practices. Water quantity, for purposes of this chapter, does not mean the withdrawal of ground water or diversion of surface water pursuant to RCW 90.03.250 through 90.03.340.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • High Quality Waters means all state waters, except:

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • tpd means tonnes per day.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • FIPPA means the Freedom of Information and Protection of Privacy Act (Ontario) and the regulations made under it as it and they may be amended from time to time;

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • Quality Assurance Plan or “QAP” shall have the meaning set forth in Clause 11.2;

  • FOIPPA means the Freedom of Information and Protection of Privacy Act;

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Categorical pretreatment standard or “Categorical Standard” means any regulation containing pollutant discharge limits promulgated by the U.S. EPA in accordance with Sections 307(b) and (c) of the Clean Water Act, 33 USC 1317, which apply to a specific category of Users and which appear in 40 CFR Chapter I, Subchapter N, Parts 405-471.

  • Annual Resource Price Adder means, for Delivery Years starting June 1, 2014 and ending May 31, 2017, an addition to the marginal value of Unforced Capacity and the Extended Summer Resource Price Adder as necessary to reflect the price of Annual Resources required to meet the applicable Minimum Annual Resource Requirement. Annual Revenue Rate:

  • service delivery and budget implementation plan means a detailed plan approved by the executive mayor of a municipality in terms of section 53(l)(c)(ii) of the MFMA for implementing the municipality's delivery of municipal services and its annual budget, and which must indicate