Wick Drain definition

Wick Drain means a prefabricated strip that is inserted into the ground for draining water and consolidating compressible soils or sediments.
Wick Drain means a prefabricated drainage strip which is driven into the ground for the removal of pore water from the soil, therefore consolidating compressible soils. The wick drain design allows for escaping water to follow gravitational forces and to drain downwards or upwards into granular drainage layers or to the ground surface strip that is inserted into the ground for draining water and consolidating compressible soils or sediments.

Examples of Wick Drain in a sentence

  • A Materials Certification Letter shall be submitted by the Wick Drain Manufacturer to the Engineer before product delivery.

  • We agree to abide by this tender for a period of one hundred and twenty (120) days from the date fixed for tender opening of the Instructions to Tenderers, and it shall remain binding upon us and may be accepted at any time before the expiration of that period.

  • The waterproofing membrane shall meet physical requirements as specified in Table 1.2. The Wick Drain shall be a composite material and shall meet the requirements specified in Table 2.Table 1Physical Requirements of Bridge Deck Waterproofing Membrane PropertyTest MethodRubberized Asphalt TypeModified Bitumen TypeMinimum Thickness of polymeric membrane (mils) Table 2Physical Requirements of Wick Drain 3.

  • P.K., R.G. Campanella, P.T. Brown and K.E. Robinson, "Prediction of Wick Drain and Preload Performance Using Piezometer Cone Data", Canadian Geotechnical Journal, Vol.

  • Subject to the last sentence of this paragraph, the Contractor will not be held responsible for any defects or failures of these select fills to the extent directly resulting from the design and advance installation of such wick drains by the Province pursuant to the Wick Drain Contract.

  • Regions were better equipped than countries to address the ever-increasing number of migration crises; as such, Croatia continued to cooperate with countries in South-eastern Europe and international organizations to implement the Regional Housing Programme within the framework on the Sarajevo Process.

  • The goal of the installation procedure is to position the pressure transducer of the piezometer to within 15 inches (± 1 inch) of an adjacent Vertical Granular Drain or Wick Drain, to be installed subsequent to the piezometer.

  • Illustration of the Principle of Wick DrainsSOURCE: US Wick Drain.

  • Bousquet, and A.M. Vignola, Balance in asthma between matrix metalloproteinases and their inhibitors.

  • E12.10.5 Wick Drain Installation (a) Wick drains shall be installed along the full length of the barriers and headers, and shall be installed when the asphalt tack coat is still hot and tacky.

Related to Wick Drain

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Pistol means any firearm with a barrel less than sixteen inches in length, or is designed to be held and fired by the use of a single hand.

  • Pipe or “Piping” means a hollow cylinder or tubular conduit that is constructed of non-earthen materials.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Electrical cleaner means a product labeled to remove heavy soils such as grease, grime, or oil from electrical equipment, including, but not limited to, electric motors, armatures, relays, electric panels, or generators. Electrical Cleaner does not include “General Purpose Cleaner,” “General Purpose Degreaser,” “Dusting Aid,” “Electronic Cleaner,” “Energized Electrical Cleaner,” “Pressurized Gas Duster,” “Engine Degreaser,” “Anti-Static Product,” or products designed to clean the casings or housings of electrical equipment.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Sailboat means the same as that term is defined in Section 73-18-2.

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • Drywell means an unlined or partially lined underground pit (regardless of geometry) into which drainage from roofs, basement floors, water softeners or other non-wastewater sources is discharged and from which the liquid seeps into the surrounding soil.

  • stacked townhouse means a building, other than a townhouse or apartment building, containing at least 3 dwelling units, each dwelling unit being separated from the other vertically and/or horizontally, and each dwelling unit having an entrance to grade shared with no more than 3 other units;

  • Panchayat means an institution (by whatever name called) of self-government constituted under article 243B, for the rural areas;

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • PNode has the meaning set forth in the CAISO Tariff.

  • Perimeter means the fenced or walled area of the institution that restrains the movement of the inmates.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Airside means, generally, those areas of an Airport which requires a person to pass through a security checkpoint to access. References to "sterile areas" generally mean Airside areas within terminal buildings. References to "Airfield", "Aircraft Operations Area", "AOA", or "Secured areas" generally mean outdoor Airside areas or areas not accessible to passengers.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Zone 3 means all of that part of the Lower Peninsula south of the line described in subdivision (bb).

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • NBOME means the National Board of Osteopathic Medical Examiners, an organization that prepares and administers qualifying examinations for osteopathic physicians.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Power boiler means a boiler in which steam or other vapor is generated at a pressure of more than 15 psig for use external to itself or a boiler in which water is heated and intended for operation at pressures in excess of 160 psig and/or temperatures in excess of 250 degrees F by the direct application of energy from the combustion of fuels or from electricity, solar or nuclear energy.