Wood residue definition

Wood residue means, in reference to logging, manufacturing or milling processes, woody waste that is generated by the cutting, chipping, grinding, shaping, or smoothing of wood or wood products. Wood residue includes bark, chips, edging sawdust, shavings, or slabs and may include small amounts of glue, binder, or resin from wood products. Wood residue does not include woody waste mixed with soil or other nonwood materials such as plastic, metal, cement, or mineral fibers.
Sample 1Sample 2Sample 3
Wood residue means a waste by-product of the pulp and paper industry which consists of bark, sawdust, slabs, chips, shavings, and mill trims.
Sample 1Sample 2Sample 3
Wood residue means bark, sawdust, slabs, chips, shaving, mill trim, and other wood products derived from wood processing and forest management operations.
Sample 1Sample 2

Examples of Wood residue in a sentence

  • Wood residues from forest products used for conversion to biomass energy can be broadly categorized into forest residue, residue from forest products industry, and urban wood waste, based on their origin (Table 1).Table 1: Types of Wood Residues from Different Operations (Source: Parikka, 2004) Source of Residue Wood residue from forest products industry can be divided into residue from primary and secondary industry, depending on the source of origin.

  • Wood residue fiber comes from two major sources; 1) primary woodworking plants, such as sawmills and plywood mills, and 2) secondary woodworking plants, such as furniture and millwork factories.

  • Wood residue enters in the space above the bed and burns both in suspension and in the bed.

  • Raw wood - imports Wood residue - importsSemi-finished goods - imports Finished products – imports Raw wood - exportsWood residue - exportsSemi-finished goods - exports Finished products – exports Net trade balanceexports[in 1.000 m3]importsSources: DIETER 2002, p.

  • The projects specified in the study represent a green energy potential of 180 MW capacity (1500 GWh per year) at a cost of four to nine cents per kWh. Wood residue projects that result in the closure of beehive burners contribute to improved air quality and reduced health problems.

  • Wood residue must be a clean fresh mix free of substances foreign to natural composition of wood such as preserving chemicals, paint, processing chemicals, glues, sulphurous, phosphorous or nitrogenous chemicals that might be classified as hazardous or appear in flue gas or ash.

  • Wood residue collection campaign – TEGA Sfantu Gheorghe (Source: Green Energy cluster).

  • The Preamble notes that the government felt constrained by section 163(j)(4)(D), which did not reference section 163(j)(4)(B), and the legislative history to section 163(j) in extending the principles of section 163(j)(4)(B) to S corporations.

  • Wood residue from the sawmill and planer mill is both used onsite as fuel and shipped offsite by truck and rail.The site contains facilities for repair and maintenance of log and lumber handling equipment as well as mobile and other miscellaneous equipment and vehicles used in mill operations.Debarker – The logs are delivered by truck to the sawmill, where they are unloaded and either sent directly to one of the two debarkers or stored in the log storage yard for future processing.

  • Wood residue burned as fuel in pulp and papermaking facilities is mostly bark, although the residue may also include sawdust, shavings, and rejects from lumber manufacturing processes.


More Definitions of Wood residue

Wood residue means items such as brush, wood, large sections of tree trunks, large limbs, wood chips, and other such products produced or generated by this operation on the BTU system.
Sample 1
Wood residue means wood chips, slabs, edgings, sawdust, shavings and hog fuel;
Sample 1
Wood residue means bark, sawdust, slabs, chips, shav- ings, mill trim and other wood products derived from wood pro- cessing and forest management operations.
Sample 1
Wood residue means bark, slabs, edgings, shavings, sawdust and any other by-products resulting from the manufacture or processing of forest products.
Sample 1
Wood residue means the by-products from the processing of timber and includes slabs, tops, edgings, bark, shavings and sawdust but does not include woodchips.
Sample 1

Related to Wood residue

  • Basic gas supply service means gas supply service that is

  • Demand respirator means an atmosphere-supplying respirator that admits breathing air to the facepiece only when a negative pressure is created inside the facepiece by inhalation.

  • Operating Envelope means the limits on the Company's approved operations set out in Conditions 2.3 to 2.7 of this

  • Section 385 Controlled Partnership has the meaning set forth in Treasury Regulation Section 1.385-1(c)(1) for a “controlled partnership”.

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • Pressure demand respirator means a positive pressure atmosphere-supplying respirator that admits breathing air to the facepiece when the positive pressure is reduced inside the facepiece by inhalation.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Subloop shall have the meaning set forth in Section 9.3.1.

  • Permitted Special Servicer/Affiliate Fees Any commercially reasonable treasury management fees, banking fees, title insurance and/or other insurance commissions and fees, title agency fees, and appraisal review fees received or retained by the Special Servicer or any of its Affiliates in connection with any services performed by such party with respect to any Serviced Loan or REO Property, in each case, in accordance with Article III of this Agreement.

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Source reduction means any practice that reduces the amount of any hazardous substance, pollutant, or contaminant entering any waste stream or otherwise released into the environment prior to recycling, energy recovery, treatment, or disposal.

  • Material support and resources means currency or monetary instruments or financial securities, financial services, lodging, training, expert advice or assistance, safehouses, false documentation or identification, communications equipment, facilities, weapons, lethal substances, explosives, personnel, transportation, and other physical assets, except medicine or religious materials.”

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Fat wood means pieces of wood kindling with high naturally-occurring levels of sap or resin which enhance ignition of the kindling. “Fat wood” does not include any kindling with substances added to enhance flammability, such as wax-covered or wax-impregnated wood-based products.

  • Bulk gasoline terminal means a gasoline storage facility which receives gasoline from its supply source primarily by pipeline, ship, or barge, and delivers gasoline to bulk gasoline plants or to commercial or retail accounts primarily by tank truck; and has an average daily throughput of more than 76,000 liters (20,000 gallons) of gasoline.

  • Ethanol blended gasoline means the same as defined in section 214A.1.

  • Plug-in hybrid electric vehicle means a motor vehicle that:

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Gasoline means any liquid product prepared, advertised, offered for sale or sold for use as, or commonly and commercially used as, motor fuel for use in a spark-ignition, internal combustion engine, and which meets the specifications provided in Iowa Code section 214A.2.

  • Flood-related erosion area management means the operation of an overall program of corrective and preventive measures for reducing flood-related erosion damage, including but not limited to emergency preparedness plans, flood-related erosion control works and floodplain management regulations.

  • Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • Imitation controlled substance means a substance that is

  • Plug-in Hybrid Electric Vehicle (PHEV) means a vehicle that is similar to a Hybrid but is equipped with a larger, more advanced battery that allows the vehicle to be plugged in and recharged in addition to refueling with gasoline. This larger battery allows the car to be driven on a combination of electric and gasoline fuels.

  • Container Terminal means any container terminal contemplated in section 6(1)(i);

  • Waste Disposal Site means a Waste Disposal Site which is not a Hauled Sewage Disposal Site, a Sewage Works or a Waste Stabilization Pond; and