ANNEXES. Annex no. 1. Technical specification Annex no. 2. Proposal form
1 Tonnage No less than 80 t 2 Bending Length No less than 1530 mm
ANNEXES. 12.1. Technical Specification (Annex No 1);
12.2. Tender Form (Annex No. 2);
12.3. Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3);
12.4. Supplier’s Declaration (Annex No. 4). 1.8 JSC „Druskininkų Rasa“ (hereinafter – the Buyer) is implementing the project entitled “Digitization of UAB "Druskininkų Rasa" equipment processes” (No. 03.3.1-LVPA-K-854-02- 0098), jointly funded by the European Structural Funds and the Republic of Lithuania and intends to buy automatic PET blow moulding equipment. With the equipment to be purchased with digital technologies, it is planned to achieve a higher equipment speed, volume and to produce higher quality equipment.
1. Purchased goods:
1. Automatic PET blow moulding equipment 1 The production of PET bottles is carried out in two stages. During the first stage, bottle preforms are produced and purchased from suppliers supplying such preforms. In the second stage of production, the final packaging (bottle) is produced during the stretching, blowing and forming process using a PET blow moulding machine. This technical specification specifies the requirements for the automatic PET bottle blow moulding equipment to be used during the second stage of bottle production. The price of the goods must include the delivery of the goods to the place of installation at the address Xxxxxxxx xxx. 3, LT-66181 Druskininkai, Lithuania, installation, start-up and staff training costs. The goods offered must be new. The goods must be manufactured, delivered, installed, the equipment put into operation and the employees trained within 6 months from the date of signing the goods purchase agreement. At the request of the supplier, the term of performance of the contract may be extended by 60 days by written agreement of the parties, for reasons beyond the control of the supplier. Supplier is responsible for delivery of goods to the place of installation of goods at Xxxxxxxx xxx. 3, LT-66181 Druskininkai, Lithuania, installation, commissioning and staff training.
2. Technical specification No. Parameter Required value, properties
1. Performance of automatic PET blowing and molding equipment for blowing 5.0 l bottles, minimum (bottles per hour) 5 000
2. PET bottle blowing capacity interval (liters) From 0,25 till 6,0
3. The equipment is fully automated Yes
4. Simultaneously blow forming at least, PET bottles 4
5. Mould set for 5,0 l bottles Yes
6. Tooling for preforms with 38 mm neck finish Yes
7. Preform loader with...
ANNEXES. 12.1. Technical Specification (Annex No 1);
12.2. Tender Form (Annex No. 2);
12.3. Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3);
12.4. Supplier’s Declaration (Annex No. 4).
12.5. Draft of the contract (Annex No. 5). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.
ANNEXES. Annex No.1 Technical specification Annex No.2 Tender form
1) Juostinis gateris Taip 1) Horizontal band saw Yes
2) Automatizuota rampa rąstams Taip 2) Motorised log deck Yes
ANNEXES. Annex no. 1. Technical specification Annex no. 2. Proposal form 1 Laser source Fiber
ANNEXES. 12.1. Technical Specifications
12.2. Proposal form
ANNEXES. 12.1. Technical Specification (Annex No 1);
12.2. Tender Form (Annex No. 2);
12.3. Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3);
12.4. Supplier’s Declaration (Annex No. 4);
12.5. Draft of the contract (Annex No. 5).
ANNEXES. 12.1. Technical Specification (Annex No 1);
12.2. Tender Form (Annex No. 2);
12.3. Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3);
12.4. Supplier’s Declaration (Annex No. 4).
1. “Artmedica“, JSC (hereinafter – the Buyer) is implementing the project entitled “Development and improvement of an innovative liposuction device” (No. 01.2.1-LVPA-K-856-01- 0177), jointly funded by the European Structural Funds and the Republic of Lithuania and intends to to rent the liposuction devices. With the modern equipment, it is planned to encourage production of eco-friendly packaging, thus reducing production costs.
2. Lease duration - 12 months.
3. The Procurement is divided into 3 (three) parts, which are specified in this technical specification. The tender may be submitted for all or selected parts, but not less than one part of the lease purchase.
4. A specific model or source, a specific process or brand, patent, types, specific origin or production, when describing the object of the lease in the technical specification, shall be considered as acceptable and equivalent in nature.
5. The rental price of the goods must include the costs of their delivery.
1. Leased goods: Lease procurement section No. Name Technical parameters Quantity
1. Liposuction device No. 1 Electric power consumption of the control console not less than 0.30 kW 1 The handle vibrates the cannula, which is used for aesthetic body-contouring procedures. Power consumption not less than 0.065 kW Vibration of the handle is activated by a sliding switch, located on the handle Adjustable maximum speed of the handle not less than 4000 cycles/min. Handle with anodised aluminum housing Fully autoclavable handle and cable connecting to electric console Handle weight not more than 0.5 kg There is a possibility to connect multiple instruments to the electric console
2. Liposuction device No. 2 Liposuction apparatus operating on the pendulum principle 1 Digital display Handle with pendulum movement of the cannula Nutational movement of the cannula at a frequency not more than 25 Hz Fast aspirator, not less than -0.9 bar Infiltration speed controlled by a button Infiltrator allowing control of the amount of infiltrate of different areas of the body Possibility to treat lymphoedema Aspirator with minimal suction power not more than -0.1 bar Liposuction by movement of the nutational cannula Cannula handle controlled by compressed air System operation with an air pressure not more ...
ANNEXES. 14.2. Annex 2 of the Tender Conditions – „Proposal Form";
14.3. Annex 3 to the Tender Conditions – „Supplier's Declaration“.
ANNEXES. 12.1. Technical Specification;
12.2. Tender Form.