Common use of FINAL PROVISIONS Clause in Contracts

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load capacity 500 kg Security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 37 kg Electricity consumption Not more than 1200W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transfer-acceptance act Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/2023. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load Equipment capacity 500 kg Security class D8+ Chain for products with up to 15 per cent fat Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete 5 t per hour Equipment capacity for products with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain 26-80 per cent fat Not less than 24 m Lifting speed 4m3,5 t per hour Automated feed of raw materials to the mixer Yes Software controlled equipment Yes Made of stainless steel or similar material Yes Pneumatically operated Big Bag Massage Discharger Activator Yes Big Bag spout docking clamp Yes Pneumatic outlet Valve for Dust Extraction and refill to Weighopper Yes Big Bag Outlet Spout Closing device • For closing partly emptied Big Bags • Closing on the flow principle Yes Flexible BFM Connector to Weighvessel Yes Weigh & Receiver vessel underneath Big Bag Yes Weigh & Receiver Discharger Vibratory bottom diameter Not less than 700 mm Vibratory tray feeders Yes Quick Cleaning Execution Yes Pneumatic Conveying Pick Up Shoe Yes Vessel Weighing system Yes Big Bag spout docking clamp • Manual clamp lid • Dust closed clamping • Dust extraction nozzle Yes Weigh & Receiver vessel underneath Big Bag/min Weight Sack Tip Gross content: not less than 2000 ltr / 1500 Kg Diameter vessel: not less than 1600 mm Pneumatic outlet Valves for Dust Extraction and refill to Weighopper Yes Weigh & Receiver Discharger Vibratory bottom Yes Vessel Weighing system Yes Pneumatic Conveying Pick Up Shoe Yes Not less than 2 pcs in the set Yes Vacuum Receiver Filter Diameter: not less than 1800 mm Filter area: not less than 10 m2. Vacuum Blower Yes Double acting pneumatic drive Yes Positioner switches Yes Set of Pneumatic Conveying Piping Yes Not less than 2 pcs in the set Yes For connecting 2 vacuum conveying lines running at the same time Including inlet filters with press difference switch Including 2 adaptors to conveying lines Including drye air piping to convey line inlets Yes Drye air capacity Not less than 800 m3/Hr per de-humidifier Permanent Magnet Yes Horizontal Sifter Yes Metal Separator Yes Mixing quality with an extremely low relative Standard Deviation From 2 to 5 %. Suitable for mixing micro ingredients without chain pre-blends Yes v For Fat contents up to 80% Yes Bulk density From 0,45 to 0,55 kg/dm3 Capacity 5000 – 6.000 kg/h Degree of Protection Not more less than 37 kg Electricity consumption Not more than 1200W Class of protection against fine particles IP 55 Semi-automatic weighing and water Not lower than IP65 Complete with transport box Mandatory packing line Yes Equipment is must be new (unusednot used) Yes Guarantee Not The model of the proposed equipment was introduced to the market not earlier than in the year of 2017 Yes Warranty No less than 12 months from the date of signing the transfer-acceptance act protocol Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/202313/04/2021. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load capacity 500 kg Security Complete with at least 12 wireless stations Mandatory The communication station must have at least 4 different communication channels Mandatory Communication station security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than At least IP65 Complete with transport box headset-type headphones Mandatory Load capacity 1000 kg Security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 37 kg Electricity consumption Not more than 1200W Class Comes with two standalone-type active antennas, each of protection against fine particles and water Not lower than IP65 which supports at least 10 wireless stations Mandatory Complete with transport box at least 1 slave-type antenna Mandatory Comes with at least 2 with at least 5 charging channel stations Mandatory The system shall operate in the 1,9G Hz frequency band Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transfer-transfer- acceptance act Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/202306/10/2022. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load capacity 500 kg Security class D8+ Chain Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8-10 channels with anti-2 protection, prewinder switch off system and mechanical weft cutter Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 24 m Lifting speed 4m/min Weight without chain 2 pcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain 805 mm Harness drive Not less than 24 m Lifting speed 4m/min Weight without chain 20 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine drive 500-550 ppm Heddles Not more less than 37 kg Electricity consumption 7500 Drop wires Not more less than 1200W Class of protection against fine particles and water 5000 Selvedges bobbins Not lower less than IP65 Complete 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Dobby type Dobby with transport box 20 harnesses, equipped with 20 hooks Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new (unused) Yes Guarantee and unused Mandatory Additional harness drive Not less than 12 months from 30 Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Additional design program Programme that allows to transfer a design directly to the date of signing the transfer-acceptance act loom Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/202313/12/2021. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load capacity 500 kg Security class D8+ Chain Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8-10 channels with anti-2 protection, prewinder switch off system and mechanical weft cutter Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 24 m Lifting speed 4m/min Weight without chain 2 pcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain 805 mm Harness drive Not less than 24 m Lifting speed 4m/min Weight without chain 20 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine drive 500-550 ppm Heddles Not more less than 37 kg Electricity consumption 7500 Drop wires Not more less than 1200W Class of protection against fine particles and water 5000 Selvedges bobbins Not lower less than IP65 Complete 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Dobby type Dobby with transport box 20 harnesses, equipped with 20 hooks Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new (unused) Yes Guarantee and unused Mandatory Additional harness drive Not less than 12 months from 30 Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Additional design program Programme that allows to transfer a design directly to the date loom Training Included training course for 3 people Installation Mandatory Transportation Mandatory Jacquard looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of signing the transfershed With insertion blowing device Filling detection Electronic 8-acceptance act 10 channels with anti-2 protection, prewinder switch off system and mechanical weft cutter Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 2 pcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 805 mm Number of hooks 2680-2750 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Machine drive 500-550 ppm Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Harness set Super structure-frame for Jacquard machines top of the weaving loom Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/202305/11/2021. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Load capacity 500 kg Security class D8+ Chain Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian,Lithuanian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8 channels with anti-2 protection, prewinder switch off system Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 24 m Lifting speed 4m/min Weight without chain 3 pcs Reed Not less than 3 pcs Warp beam Not less than 4 pcs Warp beam diameter Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain 805 mm Harness drive Not less than 24 m Lifting 50 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine speed 4m/min Weight without chain 500-550 ppm Heddles Not more less than 37 kg Electricity consumption 10000 Drop wires Not more less than 1200W Class 5000 Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Extraction of protection against fine particles and water all weft knots Not lower less than IP65 Complete with transport box 8 pcs. Dobby type Dobby equipped for 20 harnesses Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transferand unused Mandatory Additional selvedges Equipped with 2 center tucking-acceptance act in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/202308/08/2022. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods: