Non-Conforming Product If Reliant notifies Cardinal Health during the Review Period that the Manufacturing Sample does not conform to the warranty set forth in Section 13.1 and Cardinal Health agrees with Client’s determination, Client shall not be responsible to pay for such batch (the “Defective Product”), and Cardinal Health shall, at Reliant’s option, either (A) replace any Batch of non-conforming Product, or (B) credit any payments made by Reliant for such Batch. If Cardinal Health does not agree with Reliant’s determination that such Product fails to meet the warranty set forth in Section 13.1, then after reasonable efforts to resolve the disagreement, the Parties shall cause a mutually acceptable independent third party to review records, test data and to perform comparative tests and/or analyses on the Manufacturing Sample. The results of the independent review shall be final and binding. Unless otherwise agreed to by the Parties in writing, the costs associated with such testing and review shall be borne by the non-prevailing Party. THE OBLIGATION OF CARDINAL HEALTH TO (A) REPLACE DEFECTIVE PRODUCT IN ACCORDANCE WITH THE SPECIFICATIONS OR CREDIT PAYMENTS MADE BY RELIANT FOR DEFECTIVE PRODUCT AND (B) REIMBURSE RELIANT FOR API LOST IN THE DEFECTIVE BATCH, SUBJECT TO THE LIMITATIONS IN ARTICLE 15.1, SHALL BE RELIANT’S SOLE AND EXCLUSIVE REMEDY (WITHOUT PREJUDICE TO ANY INDEMNIFICATION OBLIGATIONS UNDER SECTION 14.1 OR THE OBLIGATIONS OF SECTION 10.6 (RECALL)) UNDER THIS ARTICLE FOR DEFECTIVE PRODUCT AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED.
Acceptance and Rejection Jubilant shall be entitled to reject any shipment of Products that fails to conform to the Product Specifications or Packaging Specifications at the time of delivery to Jubilant. Jubilant shall notify Cadista of such rejection within thirty (30) days after delivery of such Products shipment to Jubilant, and shall set forth in such notification the basis under this Agreement for such rejection, including any testing or inspection results, provided, however, that in the event any such non-conformity is latent or was not obvious and could not be readily discovered from a physical inspection of the Products shipment, Jubilant may give written notice to Cadista of its rejection of such shipment within thirty (30) days after Jubilant's discovery of such non-conformance. Failure to so notify Cadista, or failure to identify the basis under this Agreement for rejection of any Product, shall constitute acceptance of such Product, except to the extent the Product fails to conform to the Product Specifications or Packaging Specifications as the case may be. After such failure to notify, Jubilant shall be obligated to make payment for such Product in accordance with pricing provisions of this Agreement. If the parties disagree as to whether any Product meets the Product Specifications or Packaging Specifications and the parties are unable to negotiate a commercially reasonable resolution, then samples and/or batch records, as appropriate, from the disputed shipment shall promptly be submitted for testing and evaluation to an independent Third Party as shall be agreed to in writing by both parties. The determination of such Third Party as to whether the disputed Product shipment meets the Product Specifications or Packaging Specifications shall be final and binding. The cost of the testing and evaluation by the independent third party shall be borne by the party whose position is found to be erroneous. If, pursuant to this Section 3.2, any Products are found not to conform to the Product Specifications or Packaging Specifications, as a result of a cause occurring prior to placement thereof with the carrier (and not arising as a result of the Materials being defective or failing to meet their respective specifications), at Cadista’s option, Jubilant shall either (i) deliver such non-conforming Products to Cadista or (ii) destroy such non-conforming Products in accordance with applicable laws, rules and regulations. Cadista shall reimburse Jubilant for all reasonable costs and expenses in connection such delivery or destruction, and, at Cadista’s option and as Jubilant’s exclusive remedy, Cadista shall either: (i) credit Jubilant for the amount paid or payable by Jubilant to Cadista for such rejected Product shipment (and reimburse Jubilant for the Material of such rejected batch at Jubilant’s cost for such Materials), or (ii) replace such rejected Product shipment (with Cadista paying Jubilant for all Materials or such replacement shipment in an amount equal to Jubilant’s cost), at no additional cost to Jubilant, as promptly as reasonably practicable, but in no event later than forty-five (45) days from receipt of notice of non-conformity of such shipment from Jubilant. Jubilant shall notify Cadista in writing of any claim relating to quantitative deficiencies in any shipment of Product that Jubilant considers to have been caused prior to shipment hereunder within thirty (30) days following receipt of any such shipment. Any claim for a quantitative deficiency which is not made within such thirty (30) days shall be deemed to have been waived by Jubilant and Jubilant shall be obligated to make payment for such Product in accordance with Section 5 of this Agreement. In the event Jubilant determines there is a quantitative deficiency from the applicable shipping documentation, the parties shall investigate such deficiency and, if the parties agree that such deficiency occurred prior to shipment, Cadista shall, at Jubilant’s option and as Jubilant’s exclusive remedy for such quantitative deficiency, (a) credit Jubilant for the amount paid by Jubilant to Cadista in excess of the aggregate price for actual quantities shipped; or (b) subject to Cadista having Product on hand at the time of request by Jubilant, rectify any such deficiency by promptly shipping the appropriate quantities of any relevant Product to Jubilant, but in no event later than fifteen (15) calendar days following the occurrence of such a deficiency, in which case Jubilant shall be obligated to pay for any such quantities pursuant to Section 5 of this Agreement.
Shipment If any of the Major Components associated with any Unit is not Shipped on or before (with the prior approval of the Buyer) the Scheduled Major Component Shipment Date set forth in Attachment 1 for reasons attributable to the Seller and not excused elsewhere in this Contract, the Seller shall pay as liquidated damages, and not as a penalty, a sum calculated in accordance with the table below for each Unit for each day of delay after the Scheduled Major Component Shipment Date as set forth in Attachment 1 until actual Shipment of the last Major Component for such Unit: Days after Scheduled Major Component Shipment Date Liquidated Damages (per day or partial day) *** *** *** *** *** *** Such liquidated damages, if any, shall be computed based on the date of Shipment of the last Major Component for a given Unit and such computations shall disregard any part of or accessory to the Major Component which may be shipped separately and arrive later unless such part of or accessory to the Major Component is necessary for the installation of the Major Component.
Acceptance; Rejection A holder of Notes may accept the offer to prepay made pursuant to this Section 8.3 by causing a notice of such acceptance to be delivered to the Company not later than 15 days after receipt by such holder of the most recent offer of prepayment. A failure by a holder of Notes to respond to an offer to prepay made pursuant to this Section 8.3 shall be deemed to constitute a rejection of such offer by such holder.
Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective THIS EXHIBIT HAS BEEN REDACTED AND IS THE SUBJECT OF A CONFIDENTIAL TREATMENT REQUEST. REDACTED MATERIAL IS MARKED WITH [***] AND HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.
Rejection of Payment Orders The Custodian shall give the Fund timely notice of the Custodian’s rejection of a payment order. Such notice may be given in writing or orally by telephone, each of which is hereby deemed commercially reasonable. In the event the Custodian fails to execute a properly executable payment order and fails to give the Fund notice of the Custodian’s non-execution, the Custodian shall be liable only for the Fund’s actual damages and only to the extent that such damages are recoverable under UCC 4A (as defined in Paragraph 7 below). Notwithstanding anything in this Funds Transfer Services Schedule and the Agreement to the contrary, the Custodian shall in no event be liable for any consequential or special damages under this Funds Transfer Services Schedule, whether or not such damages relate to services covered by UCC 4A, even if the Custodian has been advised of the possibility of such damages. Whenever compensation in the form of interest is payable by the Custodian to the Fund pursuant to this Funds Transfer Services Schedule, such compensation will be payable as specified in UCC 4A.
Forecasts and Purchase Orders On or before the twelfth (12th) day of each month, beginning on January 12, 2022, Indivior shall furnish to Curia a written twelve (12) month rolling forecast of the quantities of Product that Indivior intends to order from Curia during such period ("Rolling Forecast"). The first six (6) months of such Rolling Forecast shall constitute a firm and binding commitment to order quantities of Product specified therein ("Firm Period Forecast"), and the following six (6) months of the Rolling Forecast shall be non-binding, good faith estimates. Each month of the Rolling Forecast shall begin on the twelfth (12th) of the calendar month in which such Rolling Forecast is submitted and end on the eleventh (11th) day of the following calendar month. With exception to the Firm Period Forecast, Curia reserves the right to reject any Rolling Forecast that does not align with the physical Processing capabilities of the Facility(ies) and the parties shall work in good faith to adjust the Rolling Forecast based on available resources, Facility capacity and other relevant factors. Indivior shall have the right to request an increase of the Firm Period Forecast to include additional units of Product. Curia may, in its sole discretion, supply such additional quantities, subject to Curia's other supply commitments and manufacturing capacity. In the event Curia agrees to supply such additional quantities, Indivior shall submit a Purchase Order for such additional quantities, with the required lead times as specified below. In no event shall Curia's inability to fulfill Purchase Orders for quantities in excess of the Firm Period Forecast be deemed a breach of this Agreement, nor relieve Indivior of its obligations under this Agreement. Indivior shall submit with each Rolling Forecast, a non-cancelable Purchase Order for the Firm Period Forecast (or such portion of the Firm Period Forecast not covered by previously submitted Purchase Orders). Indivior may alternatively submit Purchase Orders for certain portions of the Firm Period Forecast subsequent to the submission of the Rolling Forecast, provided the Purchase Orders provide the required lead time for Processing as set forth below. Curia shall notify Indivior of acceptance of the Rolling Forecast and any Purchase Order within seven (7) business days of receipt. Curia shall be deemed to have accepted Purchase Orders which it does not acknowledge within seven (7) business days of receipt. Curia shall have the right to reject Rolling Forecasts and Purchase Orders that are inconsistent with this Agreement. Each Purchase Order shall specify the quantity of Product being ordered, and the desired delivery date. Upon mutual agreement in writing for additional quantities of Product beyond the Firm Period Forecast, including projected delivery date(s), Indivior shall issue the applicable Purchase Order to be accepted by Curia as described above. Once placed, all Purchase Orders for Product shall be non-cancelable. No different or additional terms or conditions set forth in any Purchase Order shall modify in any way the terms and conditions of this Agreement, and in the event of a conflict between terms in any Purchase Order and this Agreement, the terms of this Agreement shall control. All Purchase Orders submitted in accordance with the terms of this Agreement shall be effective and binding on the parties upon acceptance by Curia. Except as otherwise provided herein, neither party shall have the right or power to refuse, reduce, or otherwise modify their obligations under any Purchase Order; however, Purchase Orders may be amended (i) upon written mutual agreement regarding such modification that is signed by both parties; or (ii) as otherwise provided in this Section 4.3 or Section 4.4.
Shipments All Products delivered pursuant to the terms of this Agreement shall be suitably packed for shipment in accordance with the Specifications and marked for shipment to Customer’s destination specified in the applicable purchase order. Shipments will be made EXW (Ex-Works, Incoterms 2000) Flextronics’s facility, at which time risk of loss and title will pass to Customer. All freight, insurance and other shipping expenses, as well as any special packing expenses not included in the original quotation for the Products, will be paid by Customer. In the event Customer designates a freight carrier to be utilized by Flextronics, Customer agrees to designate only freight carriers that are currently in compliance with all applicable laws relating to anti-terrorism security measures and to adhere to the C-TPAT (Customs-Trade Partnership Against Terrorism) security recommendations and guidelines as outlined by the United States Bureau of Customs and Border Protection and to prohibit the freight carriage to be sub-contracted to any carrier that is not in compliance with the C-TPAT guidelines.
Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.
Purchase Order “Purchase Order” shall have the meaning set forth in Section 7.1.
