Common use of Acceptance Inspection Clause in Contracts

Acceptance Inspection. The basis for acceptance of the Products on this order shall be full conformance to the drawings, specifications and test criteria as stated on Netrx'x xxxumentation provided to Supplier. Supplier will satisfactorily meet a minimum of IPC610 Class II quality standard for all Products. Netrx xx its customers may elect to source inspect Products and/or test data and results before delivery from Supplier. Netrx xxxt accompany Netrx xxxtomers while at Supplier's facilities. Supplier will provide reasonable space for the source inspector. Supplier will provide Netrx xxxe (5) working days advance notice of Product availability for source inspection and Netrx xxxees to source inspect said Products within five (5) working days after such notification. When Netrx xxxcts to perform source inspection at Supplier's facility, final acceptance shall occur at the time of source inspector's acceptance of Product, provided however, that the mere review by Netrx xx performance data, test results and manufacturing processes and consultation with Supplier's employees by Netrx xxxarding such information shall not be deemed to be a Source Inspection hereunder. Netrx xxx elect to inspect delivered Products one hundred per cent (100%) or on a sampling basis. Any lot failing to meet the mutually agreed upon sample inspection lot rejection criteria may be returned to Supplier for one hundred per cent (100%) inspection, at Supplier's expense, if so desired by Netrx. Xxtrx xxxl notify Supplier of rejection of any Products in writing within two (2) working days after rejection. Supplier may elect to have the Products returned to them for evaluation, or with Netrx'x xxxcurrence, have Netrx xxxair the Product at Supplier's pre-approved cost. Any Products returned to Supplier shall be handled per Supplier's Returned Material Authorization procedure. Products returned to Supplier for evaluation and/or repair shall be repaired or replaced by Supplier within ten (10) working days of receipt unless required by Netrx xx meet Netrx'x xxxthly shipment commitments. In that event, the Supplier will utilize available resources, including finished goods inventory, overtime labor, etc. to expedite and complete the timely delivery of Products at Supplier's expense.

Acceptance Inspection. The basis for acceptance 5.1 MSD shall, immediately after its receipt of the Products on this order delivered Deliverable, conduct an acceptance inspection in accordance with the inspection method and inspection standards previously prescribed by MSD and Supplier through mutual consultation, and MSD shall be full conformance to the drawings, specifications and test criteria as stated on Netrx'x xxxumentation provided to Supplier. Supplier will satisfactorily meet a minimum of IPC610 Class II quality standard for all Products. Netrx xx its customers may elect to source inspect Products and/or test data and results before delivery from Supplier. Netrx xxxt accompany Netrx xxxtomers while at Supplier's facilities. Supplier will provide reasonable space for the source inspector. Supplier will provide Netrx xxxe (5) working days advance notice of Product availability for source inspection and Netrx xxxees to source inspect said Products within five (5) working days after such notification. When Netrx xxxcts to perform source inspection at Supplier's facility, final acceptance shall occur at the time of source inspector's acceptance of Product, provided however, that the mere review by Netrx xx performance data, test results and manufacturing processes and consultation with Supplier's employees by Netrx xxxarding such information shall not be deemed to be a Source Inspection hereunder. Netrx xxx elect to inspect delivered Products one hundred per cent (100%) or on a sampling basis. Any lot failing to meet the mutually agreed upon sample inspection lot rejection criteria may be returned to Supplier for one hundred per cent (100%) inspection, at Supplier's expense, if so desired by Netrx. Xxtrx xxxl notify Supplier of rejection the results thereof without delay. 5.2 If MSD discovers anything not conforming to the terms of this Agreement or any Products Individual Agreement regarding the quality or quantity of the Product (the “Non- Conforming Item”) as a result of the acceptance inspection referenced in writing the preceding Paragraph, Supplier shall deliver the missing or replacement Product, repair the Product containing Non-Conforming Item (the “Substandard Product”), or take other measures in compliance with MSD’s instructions within two (2) working days after rejection. the period separately specified by MSD, and MSD shall inspect or re-inspect the Product so delivered or repaired. 5.3 In the event, despite MSD’s instructions referenced in the preceding Paragraph, Supplier fails to deliver the missing or replacement Product or repair the Substandard Product within the period specified by MSD, or in the event that the reason for the Substandard Product is based on a minor defect and it is recognized that the Substandard Product can be used through MSD innovations, MSD may elect specially adopt and receive the Substandard Product as a special exception limited to this Substandard Product, conditionally upon the reduction of the purchase price amount in accordance with the degree of the non-conformity. 5.4 If MSD requests that Supplier retrieve the Substandard Deliverable, Supplier shall retrieve the Substandard Deliverable within the period separately prescribed by MSD; during such period, MSD shall keep custody of the Substandard Deliverable with the care of a good manager. 5.5 Upon the expiration of the period referenced in the preceding Paragraph, MSD shall have the Products returned right to them for evaluationreturn the Substandard Deliverable to Supplier, or dispose of the Substandard Deliverable with Netrx'x xxxcurrenceSupplier’s consent. In such event, have Netrx xxxair the Product at Supplier's pre-approved cost. Any Products returned to Supplier shall be handled per pay the cost and expenses incurred in connection with such return or disposal. 5.6 Nothing in this Article shall prejudice MSD’s right to claim damage compensations from Supplier's Returned Material Authorization procedure. Products returned to Supplier for evaluation and/or repair shall be repaired or replaced by Supplier within ten (10) working days of receipt unless required by Netrx xx meet Netrx'x xxxthly shipment commitments. In that event, the Supplier will utilize available resources, including finished goods inventory, overtime labor, etc. to expedite and complete the timely delivery of Products at Supplier's expense.

Acceptance Inspection. The basis for acceptance 4.1 ORGANON shall, immediately after its receipt of the Products on this order delivered Product, confirm the quantity and packaging condition. If deemed necessary by ORGANON or Supplier, an acceptance inspection shall be full conformance to conducted in accordance with the drawingsinspection method and inspection standards previously prescribed by ORGANON and Supplier through mutual consultation, specifications and test criteria as stated on Netrx'x xxxumentation provided to Supplier. Supplier will satisfactorily meet a minimum of IPC610 Class II quality standard for all Products. Netrx xx its customers may elect to source inspect Products and/or test data and results before delivery from Supplier. Netrx xxxt accompany Netrx xxxtomers while at Supplier's facilities. Supplier will provide reasonable space for the source inspector. Supplier will provide Netrx xxxe (5) working days advance notice of Product availability for source inspection and Netrx xxxees to source inspect said Products within five (5) working days after such notification. When Netrx xxxcts to perform source inspection at Supplier's facility, final acceptance ORGANON shall occur at the time of source inspector's acceptance of Product, provided however, that the mere review by Netrx xx performance data, test results and manufacturing processes and consultation with Supplier's employees by Netrx xxxarding such information shall not be deemed to be a Source Inspection hereunder. Netrx xxx elect to inspect delivered Products one hundred per cent (100%) or on a sampling basis. Any lot failing to meet the mutually agreed upon sample inspection lot rejection criteria may be returned to Supplier for one hundred per cent (100%) inspection, at Supplier's expense, if so desired by Netrx. Xxtrx xxxl notify Supplier of rejection the results thereof without delay. 4.2 If ORGANON discovers anything not conforming to the terms of this Agreement or any Products Individual Agreement regarding the quality or quantity of the Product (the “Non- Conforming Item”) as a result of the confirmation of the quantity or packaging condition referenced in writing the preceding Paragraph or the acceptance inspection referenced in the preceding Paragraph, Supplier shall deliver the missing or replacement Product, repair the Product containing Non-Conforming Item (the “Substandard Product”), or take other measures in compliance with ORGANON’s instructions within two (2) working days after rejection. the period separately specified by ORGANON, and ORGANON shall inspect or re-inspect the Product so delivered or repaired. 4.3 In the event, despite ORGANON’s instructions referenced in the preceding Paragraph, Supplier fails to deliver the missing or replacement Product or repair the Substandard Product within the period specified by ORGANON, or in the event that the reason for the Substandard Product is based on a minor defect and it is recognized that the Substandard Product can be used through ORGANON innovations, ORGANON may elect specially adopt and receive the Substandard Product as a special exception limited to this Substandard Product, conditionally upon the reduction of the purchase price amount in accordance with the degree of the non-conformity. 4.4 If ORGANON requests that Supplier retrieve the Substandard Product, Supplier shall retrieve the Substandard Product within the period separately prescribed by ORGANON; during such period, ORGANON shall keep custody of the Substandard Product with the care of a good manager. 4.5 Upon the expiration of the period referenced in the preceding Paragraph, ORGANON shall have the Products returned right to them for evaluationreturn the Substandard Product to Supplier, or dispose of the Substandard Product with Netrx'x xxxcurrenceSupplier’s consent. In such event, have Netrx xxxair the Product at Supplier's pre-approved cost. Any Products returned to Supplier shall be handled per pay the cost and expenses incurred in connection with such return or disposal. 4.6 Nothing in this Article shall prejudice ORGANON’s right to claim damage compensations from Supplier's Returned Material Authorization procedure. Products returned to Supplier for evaluation and/or repair shall be repaired or replaced by Supplier within ten (10) working days of receipt unless required by Netrx xx meet Netrx'x xxxthly shipment commitments. In that event, the Supplier will utilize available resources, including finished goods inventory, overtime labor, etc. to expedite and complete the timely delivery of Products at Supplier's expense.

Acceptance Inspection. The basis for acceptance 4.1 MSD shall, immediately after its receipt of the Products on this order delivered Product, confirm the quantity and packaging condition. If deemed necessary by MSD or Supplier, an acceptance inspection shall be full conformance to conducted in accordance with the drawingsinspection method and inspection standards previously prescribed by MSD and Supplier through mutual consultation, specifications and test criteria as stated on Netrx'x xxxumentation provided to Supplier. Supplier will satisfactorily meet a minimum of IPC610 Class II quality standard for all Products. Netrx xx its customers may elect to source inspect Products and/or test data and results before delivery from Supplier. Netrx xxxt accompany Netrx xxxtomers while at Supplier's facilities. Supplier will provide reasonable space for the source inspector. Supplier will provide Netrx xxxe (5) working days advance notice of Product availability for source inspection and Netrx xxxees to source inspect said Products within five (5) working days after such notification. When Netrx xxxcts to perform source inspection at Supplier's facility, final acceptance MSD shall occur at the time of source inspector's acceptance of Product, provided however, that the mere review by Netrx xx performance data, test results and manufacturing processes and consultation with Supplier's employees by Netrx xxxarding such information shall not be deemed to be a Source Inspection hereunder. Netrx xxx elect to inspect delivered Products one hundred per cent (100%) or on a sampling basis. Any lot failing to meet the mutually agreed upon sample inspection lot rejection criteria may be returned to Supplier for one hundred per cent (100%) inspection, at Supplier's expense, if so desired by Netrx. Xxtrx xxxl notify Supplier of rejection the results thereof without delay. 4.2 If MSD discovers anything not conforming to the terms of this Agreement or any Products Individual Agreement regarding the quality or quantity of the Product (the “Non- Conforming Item”) as a result of the confirmation of the quantity or packaging condition referenced in writing the preceding Paragraph or the acceptance inspection referenced in the preceding Paragraph, Supplier shall deliver the missing or replacement Product, repair the Product containing Non-Conforming Item (the “Substandard Product”), or take other measures in compliance with MSD’s instructions within two (2) working days after rejection. the period separately specified by MSD, and MSD shall inspect or re-inspect the Product so delivered or repaired. 4.3 In the event, despite MSD’s instructions referenced in the preceding Paragraph, Supplier fails to deliver the missing or replacement Product or repair the Substandard Product within the period specified by MSD, or in the event that the reason for the Substandard Product is based on a minor defect and it is recognized that the Substandard Product can be used through MSD innovations, MSD may elect specially adopt and receive the Substandard Product as a special exception limited to this Substandard Product, conditionally upon the reduction of the purchase price amount in accordance with the degree of the non-conformity. 4.4 If MSD requests that Supplier retrieve the Substandard Product, Supplier shall retrieve the Substandard Product within the period separately prescribed by MSD; during such period, MSD shall keep custody of the Substandard Product with the care of a good manager. 4.5 Upon the expiration of the period referenced in the preceding Paragraph, MSD shall have the Products returned right to them for evaluationreturn the Substandard Product to Supplier, or dispose of the Substandard Product with Netrx'x xxxcurrenceSupplier’s consent. In such event, have Netrx xxxair the Product at Supplier's pre-approved cost. Any Products returned to Supplier shall be handled per pay the cost and expenses incurred in connection with such return or disposal. 4.6 Nothing in this Article shall prejudice MSD’s right to claim damage compensations from Supplier's Returned Material Authorization procedure. Products returned to Supplier for evaluation and/or repair shall be repaired or replaced by Supplier within ten (10) working days of receipt unless required by Netrx xx meet Netrx'x xxxthly shipment commitments. In that event, the Supplier will utilize available resources, including finished goods inventory, overtime labor, etc. to expedite and complete the timely delivery of Products at Supplier's expense.

Acceptance Inspection. The basis for acceptance 5.1 ORGANON shall, immediately after its receipt of the Products on this order delivered Deliverable, conduct an acceptance inspection in accordance with the inspection method and inspection standards previously prescribed by ORGANON and Supplier through mutual consultation, and ORGANON shall be full conformance to the drawings, specifications and test criteria as stated on Netrx'x xxxumentation provided to Supplier. Supplier will satisfactorily meet a minimum of IPC610 Class II quality standard for all Products. Netrx xx its customers may elect to source inspect Products and/or test data and results before delivery from Supplier. Netrx xxxt accompany Netrx xxxtomers while at Supplier's facilities. Supplier will provide reasonable space for the source inspector. Supplier will provide Netrx xxxe (5) working days advance notice of Product availability for source inspection and Netrx xxxees to source inspect said Products within five (5) working days after such notification. When Netrx xxxcts to perform source inspection at Supplier's facility, final acceptance shall occur at the time of source inspector's acceptance of Product, provided however, that the mere review by Netrx xx performance data, test results and manufacturing processes and consultation with Supplier's employees by Netrx xxxarding such information shall not be deemed to be a Source Inspection hereunder. Netrx xxx elect to inspect delivered Products one hundred per cent (100%) or on a sampling basis. Any lot failing to meet the mutually agreed upon sample inspection lot rejection criteria may be returned to Supplier for one hundred per cent (100%) inspection, at Supplier's expense, if so desired by Netrx. Xxtrx xxxl notify Supplier of rejection the results thereof without delay. 5.2 If ORGANON discovers anything not conforming to the terms of this Agreement or any Products Individual Agreement regarding the quality or quantity of the Product (the “Non- Conforming Item”) as a result of the acceptance inspection referenced in writing the preceding Paragraph, Supplier shall deliver the missing or replacement Product, repair the Product containing Non-Conforming Item (the “Substandard Product”), or take other measures in compliance with ORGANON’s instructions within two (2) working days after rejection. the period separately specified by ORGANON, and ORGANON shall inspect or re-inspect the Product so delivered or repaired. 5.3 In the event, despite ORGANON’s instructions referenced in the preceding Paragraph, Supplier fails to deliver the missing or replacement Product or repair the Substandard Product within the period specified by ORGANON, or in the event that the reason for the Substandard Product is based on a minor defect and it is recognized that the Substandard Product can be used through ORGANON innovations, ORGANON may elect specially adopt and receive the Substandard Product as a special exception limited to this Substandard Product, conditionally upon the reduction of the purchase price amount in accordance with the degree of the non-conformity. 5.4 If ORGANON requests that Supplier retrieve the Substandard Deliverable, Supplier shall retrieve the Substandard Deliverable within the period separately prescribed by ORGANON; during such period, ORGANON shall keep custody of the Substandard Deliverable with the care of a good manager. 5.5 Upon the expiration of the period referenced in the preceding Paragraph, ORGANON shall have the Products returned right to them for evaluationreturn the Substandard Deliverable to Supplier, or dispose of the Substandard Deliverable with Netrx'x xxxcurrenceSupplier’s consent. In such event, have Netrx xxxair the Product at Supplier's pre-approved cost. Any Products returned to Supplier shall be handled per pay the cost and expenses incurred in connection with such return or disposal. 5.6 Nothing in this Article shall prejudice ORGANON’s right to claim damage compensations from Supplier's Returned Material Authorization procedure. Products returned to Supplier for evaluation and/or repair shall be repaired or replaced by Supplier within ten (10) working days of receipt unless required by Netrx xx meet Netrx'x xxxthly shipment commitments. In that event, the Supplier will utilize available resources, including finished goods inventory, overtime labor, etc. to expedite and complete the timely delivery of Products at Supplier's expense.