Common use of Accuracy of Meters Clause in Contracts

Accuracy of Meters. All Producers’ Wellhead Meters and Gatherer’s Receipt Meters shall be verified (and calibrated) at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 Mcf/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 Mcf/d and 500 Mcf/d, at least once each 6 Months, (iii) if the deliveries of Gas through the meter average between 500 Mcf/d and 5,000 Mcf/d, at least once each 3 Months, (iv) if the deliveries of Gas through the meter average more than 5,000 Mcf/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by Gatherer. If, upon any test, the measuring equipment is found to be inaccurate by 2% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 2% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d) below. If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 months. If Producers desire a special test of any measuring equipment, then at least 72 hours advance Notice shall be given to Gatherer by Producers, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 2% or less, Gatherer shall have the right to xxxx Producers for the costs incurred due to such special test, including any labor and transportation costs and Producers shall pay such costs promptly upon invoice thereof.

Appears in 4 contracts

Samples: Barnett Gas Gathering Agreement (Chesapeake Midstream Partners, L.P.), Gas Gathering Agreement (Chesapeake Midstream Partners, L.P.), Barnett Gas Gathering Agreement (Chesapeake Midstream Partners, L.P.)

AutoNDA by SimpleDocs

Accuracy of Meters. All Producers’ Production Wellhead Meters and Gatherer’s Receipt Meters shall be verified (and calibrated) at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 Mcf/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 Mcf/d and 500 Mcf/d, at least once each 6 Months, (iii) if the deliveries of Gas through the meter average between 500 Mcf/d and 5,000 Mcf/d, at least once each 3 Months, (iv) if the deliveries of Gas through the meter average more than 5,000 Mcf/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by Gatherer. If, upon any test, the measuring equipment is found to be inaccurate by 2% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 2% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d2(d) below. If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 months. If Producers desire a special test of any measuring equipment, then at least 72 hours advance Notice shall be given to Gatherer by Producers, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 2% or less, Gatherer shall have the right to xxxx Producers for the costs incurred due to such special test, including any labor and transportation costs and Producers shall pay such costs promptly upon invoice thereof.

Appears in 2 contracts

Samples: Gas Gathering Agreement, Gas Gathering Agreement (Chesapeake Midstream Partners Lp)

Accuracy of Meters. All Producers’ Wellhead Meters and Gatherer’s Receipt Meters meters shall be verified (and calibrated) at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 McfMcf’s/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 McfMcf’s/d and 500 McfMcf’s/d, at least once each every 6 Months, (iii) if the deliveries of Gas through the meter average between 500 McfMcf’s/d and 5,000 McfMcf’s/d, at least once each every 3 Months, or (iv) if the deliveries of Gas through the meter average more than 5,000 McfMcf’s/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by GathererMonth. If, upon any test, the measuring equipment is found to be inaccurate by 21% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Producer’s Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 21% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d) below1(f). If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 months. If Producers desire Producer desires a special test of any measuring equipmentequipment owned by Gatherer, then at least 72 hours advance Notice notice shall be given to Gatherer by ProducersProducer, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 21% or less, Gatherer shall have the right to xxxx Producers Producer for the costs incurred due to such special test, including any labor and transportation costs cost, and Producers Producer shall pay such costs promptly upon invoice thereof.

Appears in 1 contract

Samples: Gas Gathering Agreement (Gastar Exploration LTD)

Accuracy of Meters. All Producers’ Wellhead Meters and Gatherer’s Receipt Meters meters shall be verified (and calibrated) by its owner at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 Mcf/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 Mcf/d and 500 Mcf/d, at least once each every 6 Months, (iii) if the deliveries of Gas through the meter average between 500 Mcf/d and 5,000 Mcf/d, at least once each every 3 Months, or (iv) if the deliveries of Gas through the meter average more than 5,000 Mcf/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by GathererMonth. If, upon any test, the measuring equipment is found to be inaccurate by 2% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Producer’s Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 2% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d) below1(f). If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 monthsMonths. If Producers desire either Party desires a special test of any measuring equipment, then at least 72 hours advance Notice shall be given to Gatherer by Producersthe other Party, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 2% or less, Gatherer the testing Party shall have the right to xxxx Producers the requesting Party for the costs incurred due to such special test, including any labor and transportation costs cost, and Producers Producer shall pay such costs promptly upon invoice thereof.

Appears in 1 contract

Samples: Gas Gathering and Processing Agreement (Gasco Energy Inc)

AutoNDA by SimpleDocs

Accuracy of Meters. All Producers’ Wellhead Meters and Gatherer’s Receipt Meters meters shall be verified (and calibrated) by its owner at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 Mcf/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 Mcf/d and 500 Mcf/d, at least once each every 6 Months, (iii) if the deliveries of Gas through the meter average between 500 Mcf/d and 5,000 Mcf/d, at least once each every 3 Months, or (iv) if the deliveries of Gas through the meter average more than 5,000 Mcf/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by GathererMonth. If, upon any test, the measuring equipment is found to be inaccurate by 2% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Producer’s Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 2% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d) below1(g). If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 monthsMonths. If Producers desire either Party desires a special test of any measuring equipment, then at least 72 hours advance Notice shall be given to Gatherer by Producersthe other Party, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 2% or less, Gatherer the testing Party shall have the right to xxxx Producers the requesting Party for the costs incurred due to such special test, including any labor and transportation costs cost, and Producers Producer shall pay such costs promptly upon invoice thereof.

Appears in 1 contract

Samples: Gas Gathering and Processing Agreement (Gasco Energy Inc)

Accuracy of Meters. All Producers’ Wellhead Meters and Gatherer’s Receipt Meters meters shall be verified (and calibrated) by its owner at the following intervals: (i) if the deliveries of Gas through the meter average less than 100 Mcf/d, at least once each Year, (ii) if the deliveries of Gas through the meter average between 100 Mcf/d and 500 Mcf/d, at least once each every 6 Months, (iii) if the deliveries of Gas through the meter average between 500 Mcf/d and 5,000 Mcf/d, at least once each every 3 Months, or (iv) if the deliveries of Gas through the meter average more than 5,000 Mcf/d, at least 12 times per Year with no longer than 45 Days between each meter verification and calibration. Meters located on land managed by the Bureau of Land Management will be verified at least once each calendar quarter by GathererMonth. If, upon any test, the measuring equipment is found to be inaccurate by 2% or less, previous readings of such equipment will be considered correct in computing the deliveries of Producers’ Gas and MV Mitigation Producer’s Gas hereunder, but such equipment shall immediately be adjusted to record accurately. If, upon any test, the measuring equipment is found to be inaccurate by more than 2% of the average flow rate since the last test, then any previous recordings of such equipment shall be corrected to zero (0) error for any period which is known definitely or agreed upon, using the procedure set forth in Section 1(d) below1(f). If such period is not known or agreed upon, such correction shall be made for a period covering 1/2 of the time elapsed since the date of the latest test, but not to exceed 16 Days when the equipment is tested every Month and not to exceed 45 Days when the equipment is tested every 3 monthsMonths. If Producers desire either Party desires a special test of any measuring equipment, then at least 72 hours advance Notice shall be given to Gatherer by Producersthe other Party, and both Parties shall cooperate to secure a prompt test of the accuracy of such equipment. If the measuring equipment so tested is found to be inaccurate by 2% or less, Gatherer the testing Party shall have the right to xxxx Producers the requesting Party for the costs incurred due to such special test, including any labor and transportation costs cost, and Producers Producer shall pay such costs promptly upon invoice thereof.. (f)

Appears in 1 contract

Samples: Gathering and Processing Agreement

Time is Money Join Law Insider Premium to draft better contracts faster.