We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Common use of Additional Development and Construction Covenants Clause in Contracts

Additional Development and Construction Covenants. ‌ (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets. (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier. (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be. (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.

Appears in 3 contracts

Samples: E Lt 1 Contract, E Lt 1 Contract, E Lt 1 Contract

AutoNDA by SimpleDocs

Additional Development and Construction Covenants. (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets.Markets.‌ (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier.Supplier.‌‌ (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be.be.‌ (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.System.‌

Appears in 2 contracts

Samples: E Lt 1 Contract, E Lt 1 Contract

Additional Development and Construction Covenants. ‌ (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets.. Draft (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier. (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be. (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.

Appears in 1 contract

Samples: E Lt 1 Contract

Additional Development and Construction Covenants. (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets. (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier.Supplier.‌ (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be.be.‌ (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.System.‌ (e) is

Appears in 1 contract

Samples: Long Term Reliability Services Contract

Additional Development and Construction Covenants. (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets. (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier.Supplier.‌‌ (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be.be.‌ (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.System.‌ (e) is

Appears in 1 contract

Samples: Long Term Reliability Services Contract

AutoNDA by SimpleDocs

Additional Development and Construction Covenants. ‌ (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets. (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier. (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be. (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.

Appears in 1 contract

Samples: E Lt 1 Contract

Additional Development and Construction Covenants. ‌ (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets. (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier. (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be.. Draft (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.

Appears in 1 contract

Samples: Long Term Reliability Services Contract

Additional Development and Construction Covenants. ‌‌‌ (a) The Supplier agrees that the Facility shall be located in the Province of Ontario. The Supplier agrees that the Facility shall have a Connection Point as set out in Exhibit A and shall affect supply or demand in the IESO-Administered Markets.Markets.‌ (b) The Supplier agrees to arrange for all Facility connection requirements in accordance with the Connection Agreement to permit the delivery of Electricity to the IESO-Controlled Grid. The Supplier agrees that the responsibility for all costs that are allocated to or are otherwise the responsibility of the Supplier in accordance with the Connection Agreement, the Transmission System Code and the Distribution System Code, as applicable, and as each may be interpreted or administered in accordance with any applicable interpretation bulletins issued by the OEB, shall rest with the Supplier.Supplier.‌ (c) The Supplier shall provide, at its expense, all power system components on the Supplier’s side of the Connection Point, including all transformation, switching and auxiliary equipment, such as synchronizing and protection and control equipment, pursuant to Laws and Regulations and any requirements deemed necessary by the System Operator, the Transmitter or the LDC, as applicable from time to time, to protect the safety and security of the IESO-Controlled Grid, the Transmission System, the Distribution System and each of their customers, each as the case may be.be.‌ (d) The Supplier agrees to install protective equipment to protect its own personnel, property, and equipment from variations in frequency and voltage or from temporary delivery of other than three-phase power, whether caused by the Facility, the IESO-Controlled Grid, the Transmission System or the Distribution System.System.‌

Appears in 1 contract

Samples: E Lt 1 Contract

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!