Additions and Modifications to Service Levels Sample Clauses

Additions and Modifications to Service Levels. In the event that any applicable system or function used by FIS to provide a Service is replaced during the Term by a comparable system or function, the Service Level shall, to the extent reasonably practicable, be defined during the *****of operation of such replacement system or function, provided that such Service Level shall be established at a level intended to achieve performance at least the same as or better than performance under the Service Level associated with the replaced system or function.
AutoNDA by SimpleDocs

Related to Additions and Modifications to Service Levels

  • Modifications to service This Auction Site reserves the right to modify or discontinue the Service with or without notice to user. This Auction Site shall not be liable to users or any third party should this Auction Site exercise its right to modify or discontinue the Service.

  • Penalties for Non-compliance to Service Level Agreement Where the Supplier/Service Provider fails to deliver the Goods/Services within the agreed and accepted milestone timelines and provided that the cause of the delay was not due to a fault of Transnet, penalties shall be imposed at …………………………………………………… .

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • Waiver and Modifications Any Party may (a) waive, in whole or in part, any inaccuracy of, or consent to the modification of, any representation or warranty made to it hereunder or in any document to be delivered pursuant hereto, (b) extend the time for the performance of any of the obligations or acts of the other Parties (c) waive or consent to the modification of any of the covenants herein contained for its benefit or waive or consent to the modification of any of the obligations of the other Parties hereto or (d) waive the fulfillment of any condition to its own obligations contained herein. No waiver or consent to the modifications of any of the provisions of this Agreement will be effective or binding unless made in writing and signed by the Party or Parties purporting to give the same and, unless otherwise provided, will be limited to the specific breach or condition waived. The rights and remedies of the Parties hereunder are cumulative and are in addition to, and not in substitution for, any other rights and remedies available at law or in equity or otherwise. No single or partial exercise by a Party of any right or remedy precludes or otherwise affects any further exercise of such right or remedy or the exercise of any other right or remedy to which that Party may be entitled. No waiver or partial waiver of any nature, in any one or more instances, will be deemed or construed a continued waiver of any condition or breach of any other term, representation or warranty in this Agreement.

  • Amendment and Modifications This Agreement may not be amended, modified or supplemented except by an instrument or instruments in writing signed by the party against whom enforcement of any such amendment, modification or supplement is sought.

  • Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.

  • Changes to Services The Parties acknowledge and agree that there will be changes to the scope of the Services during the Contract Period. The Customer may amend the Stories that are comprised within the Minimum Marketable Features of a Release at any time during the Release at no additional charge and without adopting the Change Control Procedure set out in Clause 28 above provided that: the Customer shall not be entitled to make any changes to the Stories that form the subject of a Sprint following the mutual agreement by the Parties of the Sprint Plan for that Sprint; new Stories and/or changes to existing Stories may only be introduced if: existing Stories with an equivalent number of Story Points are removed; or existing Stories are reduced in size by the equivalent number of Story Points, such that the total number of Story Points for the Release remains constant throughout the Release. The Supplier shall consider any request by the Customer to increase the number of Story Points for a Release, and may, subject to the Change Control Procedure set out at Clause 28, agree to such request.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Process shall be deemed a Specification change. No change in the Specifications shall be implemented by Catalent, whether requested by Client or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Unit Pricing). Catalent shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Catalent shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. Catalent reserves the right to postpone effecting changes to the Specifications until such time as the parties agree to and execute the required written amendment.

  • Changes and Modifications (i) DST shall have the right, at any time, to modify any systems, programs, procedures or facilities used in performing its obligations hereunder; provided that the Fund will be notified as promptly as possible prior to implementation of such modifications and that no such modification or deletion shall materially adversely change or affect the operations and procedures of the Fund in using the TA2000 System hereunder, the Services or the quality thereof, or the reports to be generated by such system and facilities hereunder, unless the Fund is given thirty (30) days’ prior notice to allow the Fund to change its procedures and DST provides the Fund with revised operating procedures and controls. (ii) All enhancements, improvements, changes, modifications or new features added to the TA2000 System however developed or paid for, including, without limitation, Client Requested Software (collectively, “Deliverables”), shall be, and shall remain, the confidential and exclusive property of, and proprietary to, DST. The parties recognize that during the Term of this Agreement the Fund will disclose to DST Confidential Information and DST may partly rely on such Confidential Information to design, structure or develop one or more Deliverables. Provided that, as developed, such Deliverable(s) contain no Confidential Information that identifies the Fund or any of its investors or which could reasonably be expected to be used to readily determine such identity, (i) the Fund hereby consents to DST’s use of such Confidential Information to design, to structure or to determine the scope of such Deliverable(s) or to incorporate into such Deliverable(s) and that any such Deliverable(s), regardless of who paid for it, shall be, and shall remain, the sole and exclusive property of DST and (ii) the Fund hereby grants DST a perpetual, nonexclusive license to incorporate and retain in such Deliverable(s)

  • Change and Modifications This Agreement may not be orally changed, modified or terminated, nor shall any oral waiver of any of its terms be effective. This Agreement may be changed, modified or terminated only by an agreement in writing signed by the Company and the Optionee.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!