Allocation Packing and Shipping
Allocation Packing and Shipping Sample Clauses
Related to Allocation Packing and Shipping
PACKING AND SHIPPING a. Seller shall pack the goods and materials to prevent damage and deterioration. Unless otherwise set forth in this Contract, Seller shall package the goods in accordance with the requirements of Boeing Document D37522-6 “Supplier Packaging”. Buyer may charge Seller for damage to or deterioration of any goods resulting from improper packing or packaging. b. If the Contract specifies FOB destination (place of delivery), then in addition to any other shipping instructions, Seller shall forward goods freight prepaid. Seller shall make the transportation arrangements, pay the shipping costs, and remain responsible for the goods and materials until the goods and materials are delivered and the Buyer takes possession at the destination. c. If the Contract specifies FOB origin (place of shipment), then in addition to any other shipping instructions, Seller shall forward goods collect. For goods shipped within the United States, Seller shall make no declaration concerning the value of the goods shipped except on goods where the tariff rating is dependent upon released or declared value. In such event, Seller shall release or declare such value at the maximum value within the lowest rating. Seller will ship the goods in accordance with the provisions set forth in the Boeing Domestic Shipment Routing Guide to be accessed through Buyer’s supplier portal at xxxxx://xxxxxx.xxxxxxx.xxx/. Sellers need a One Time Password (OTP) token to log into the Boeing Supplier Portal. Upon Xxxxx’s request, Seller will identify packaging charges showing material and labor costs for container fabrication. d. Seller shall provide with each container shipped under this Contract an Advanced Shipping Notice (“ASN”). For each container shipped, Seller shall provide two (2) readable copies of the ASN barcode as follows: one (1) copy is to be securely affixed to the outside of each container and one (1) copy is to be loose inside each container. Non- conforming shipments are subject to rejection and repackaging at Seller’s expense. Instructions and guidelines related to the ASN process can be found on the Boeing Supplier Portal. Seller shall access by selecting the “Enterprise ASN Instructions” hyper-link under the header “Exostar Resources”. A copy of these instructions can also be found at xxx.xxxxxxx.xxx.
PACKING AND SHIPMENT (a) Unless otherwise specified, all Work is to be packed in accordance with good commercial practice. (b) A complete packing list shall be enclosed with all shipments. SELLER shall mark containers or packages with necessary lifting, loading, and shipping information, including the LOCKHEED XXXXXX Contract number, item number, dates of shipment, and the names and addresses of consignor and consignee. Bills of lading shall include this Contract number. (c) Unless otherwise specified, delivery shall be FOB Place of Shipment.
Packaging and Shipping All shipping containers shall be packed and packaged to: (i) ensure safe arrival to final destination; (ii) secure the lowest transportation costs;(iii) comply with requirements of common carriers; (iv) meet Buyer's written instructions; and (v) meet the requirements of all applicable laws, ordinances, rules and regulations.
SHIPPING AND SHIPPING COSTS All delivered Equipment and Products must be properly packaged. Damaged Equipment and Products may be rejected. If the damage is not readily apparent at the time of delivery, Supplier must permit the Equipment and Products to be returned within a reasonable time at no cost to Sourcewell or its Participating Entities. Participating Entities reserve the right to inspect the Equipment and Products at a reasonable time after delivery where circumstances or conditions prevent effective inspection of the Equipment and Products at the time of delivery. In the event of the delivery of nonconforming Equipment and Products, the Participating Entity will notify the Supplier as soon as possible and the Supplier will replace nonconforming Equipment and Products with conforming Equipment and Products that are acceptable to the Participating Entity. Supplier must arrange for and pay for the return shipment on Equipment and Products that arrive in a defective or inoperable condition. Sourcewell may declare the Supplier in breach of this Contract if the Supplier intentionally delivers substandard or inferior Equipment or Products.
Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.
SHIPPING AND AIR TRANSPORT 1. Profits of an enterprise of a Contracting State from the operation of ships or aircraft in international traffic shall be taxable only in that State. 2. The provisions of paragraph 1 shall also apply to profits from the participation in a pool, a joint business or an international operating agency.
Packing and Marking All material and equipment to be furnished by the Contractor shall be packed, crated or otherwise suitably protected to withstand shipment undamaged to the destination. Each package, crate or part shall be marked plainly with the name of the consignee, shipping destination, the Owner's order number, and such other markings as are required. Complete packing lists, one copy with each package and two (2) copies by mail to the Owner at time of shipment, shall be supplied showing contents and identity of each package.
Weighing and Scaling Costs Purchaser agrees to pay for all weighing costs for logs delivered regardless if logs are purchased on a weight or scale basis. In addition, Purchaser agrees to pay for all scaling costs for logs delivered on a scale basis. Purchaser also agrees to pay for all costs associated with the transmission and reporting of scale or weight data.
BILLING AND PAYMENT OF CHARGES 8.1 Unless otherwise stated, each Party will render monthly bill(s) to the other for Interconnection, Resale Services, Lawful Unbundled Network Elements, Collocation, functions, facilities, products and services provided hereunder at the rates set forth in the applicable Appendix Pricing, as set forth in applicable tariffs or other documents specifically referenced herein and, as applicable, as agreed upon by the Parties or authorized by a Party. 8.1.1 Remittance in full of all bills rendered by SBC-10STATE and SBC CALIFORNIA is due within thirty (30) calendar days of each bill date (the “Bill Due Date”). Payment must be made in accordance with the terms set forth in Section 8.3 of this Agreement. 8.1.2 Remittance in full of all bills rendered by SBC NEVADA is due in accordance with the terms set forth in the Commission C2-A Tariff, with the date on which amounts are due referred to herein as the “Bill Due Date.” 8.1.3 Remittance in full of all bills rendered by SBC CONNECTICUT is due in accordance with the terms set forth in the Connecticut Access Service Tariff approved by the DPUC, with the date on which amounts are due referred to herein as the “Bill Due Date.” 8.1.4 Remittance in full of all bills rendered by CLEC is due within thirty (30) calendar days of each bill date (the “Bill Due Date”). 8.1.5 If CLEC fails to remit payment for any charges by the Bill Due Date, or if payment for any portion of the charges is received from CLEC after the Bill Due Date, or if payment for any portion of the charges is received in funds which are not immediately available to SBC-12STATE as of the Bill Due Date (individually and collectively, “Past Due”), then a late payment charge will be assessed as provided in Sections 8.1.5.1 through 8.1.5.3, as applicable. 8.1.5.1 If any charge incurred under this Agreement that is billed out of any SBC-8STATE billing system other than the SBC SOUTHWEST REGION 5-STATE Customer Records Information System (XXXX) is Past Due, the unpaid amounts will accrue interest from the day following the Bill Due Date until paid at the lesser of (i) the rate used to compute the Late Payment Charge in the applicable SBC-8STATE intrastate access services tariff for that state and (ii) the highest rate of interest that may be charged under Applicable Law. The method and timing for application of interest to any charge incurred under this Agreement that is billed out of any SBC-8STATE billing system other than SBC SOUTHWEST REGION 5-STATE's XXXX will comply with the process set forth in the applicable SBC-8STATE intrastate access services tariff for that state. 8.1.5.2 If any charge incurred under this Agreement that is billed out of SBC SOUTHWEST REGION 5-STATE's XXXX is Past Due, the unpaid amounts will accrue interest from the day following the Bill Due Date until paid. The interest rate applied to SBC SOUTHWEST REGION 5-STATE XXXX-billed Past Due unpaid amounts will be the lesser of (i) the rate used to compute the Late Payment Charge contained in the applicable SBC SOUTHWEST REGION 5-STATE intrastate retail tariff governing Late Payment Charges to SBC SOUTHWEST REGION 5-STATE's retail End Users that are business End Users in that state and (ii) the highest rate of interest that may be charged under Applicable Law. The method and timing for application of interest to any charge incurred under this Agreement that is billed out of SBC SOUTHWEST REGION 5- STATE's XXXX will be governed by the SBC SOUTHWEST REGION 5-STATE intrastate retail tariff governing Late Payment Charges to SBC SOUTHWEST REGION 5-STATE's retail End Users that are business End Users in that state. 8.1.5.3 If any charge incurred under this Agreement that is billed out of any SBC MIDWEST REGION 5-STATE billing system is Past Due, the unpaid amounts will accrue interest from the Bill Due Date at the lesser of (i) one and one-half percent (1 ½%) per month and (ii) the highest rate of interest that may be charged under Applicable Law, compounded daily from the day following the Bill Due Date to and including the date that the payment is actually made and available.
Packing and Documents 23.1 The Supplier shall provide such packing of the Goods as is required to prevent their damage or deterioration during transit to their final destination, as indicated in the Contract. During transit, the packing shall be sufficient to withstand, without limitation, rough handling and exposure to extreme temperatures, salt and precipitation, and open storage. Packing case size and weights shall take into consideration, where appropriate, the remoteness of the goods' final destination and the absence of heavy handling facilities at all points in transit. 23.2 The packing, marking, and documentation within and outside the packages shall comply strictly with such special requirements as shall be expressly provided for in the Contract, including additional requirements, if any, specified in the SCC, and in any other instructions ordered by the Procuring Entity.
