CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Risk Analysis The Custodian will provide the Fund with a Risk Analysis with respect to Securities Depositories operating in the countries listed in Appendix B. If the Custodian is unable to provide a Risk Analysis with respect to a particular Securities Depository, it will notify the Fund. If a new Securities Depository commences operation in one of the Appendix B countries, the Custodian will provide the Fund with a Risk Analysis in a reasonably practicable time after such Securities Depository becomes operational. If a new country is added to Appendix B, the Custodian will provide the Fund with a Risk Analysis with respect to each Securities Depository in that country within a reasonably practicable time after the addition of the country to Appendix B.
Sampling and Analysis The Seller has sole responsibility for quality control of the coal and shall forward its “as loaded” quality to the Buyer as soon as possible. The sampling and analysis of the coal delivered hereunder shall be performed by Buyer and the results thereof shall be accepted and used for the quality and characteristics of the coal delivered under this Agreement. All analyses shall be made in Buyer’s laboratory at Buyer’s expense in accordance with ASTM standards where applicable, or using standards mutually acceptable to both parties. Samples for analyses shall be taken by any ASTM standards or standards mutually acceptable to both parties, and may be composited and shall be taken with a frequency and regularity sufficient to provide reasonably accurate representative samples of the deliveries made hereunder. Seller represents that it is familiar with Buyer’s sampling and analysis practices, and finds them to be acceptable. Buyer shall notify Seller in writing of any significant changes in Buyer’s sampling and analysis practices. Any such changes in Buyer’s sampling and analysis practices shall, except for ASTM or mutually agreeable changes in practices, provide for no less accuracy than the sampling and analysis practices existing at the time of the execution of this Agreement, unless the Parties otherwise mutually agree.
(1) part shall be used for analysis by Buyer; one (l) part shall be used by Buyer as a check sample, if Buyer in its sole judgment determines it is necessary; one (1) part shall be retained by Buyer (LG&E) until the twenty-fifth (25th) of the month following the month of unloading (the “LG&E Disposal Date”) or Buyer (KU) until thirty (30) days after the sample is taken (the “KU Disposal Date”), the LG&E Disposal Date and the KU Disposal Date are collectively the “Disposal Date”), and shall be delivered to Seller for analysis if Seller so requests before the Disposal Date; and one part (“Referee Sample”) shall be retained by Buyer until the Disposal Date. Seller shall be given copies of all analyses made by Buyer by the tenth (10th) business day of the month following the month of unloading. Seller, on reasonable notice to Buyer shall have the right to have a representative present to observe the sampling and analyses performed by Buyer. Unless Seller requests a Referee Sample analysis before the Disposal Date, Buyer’s analysis shall be used to determine the quality of the coal delivered hereunder. The Monthly Weighted Averages shall be determined by utilizing the individual shipment analyses. If any dispute arises before the Disposal Date, the Referee Sample retained by Buyer shall be submitted for analysis to an independent commercial testing laboratory (“Independent Lab”) mutually chosen by Buyer and Seller. For each coal quality specification in question, a dispute shall be deemed not to exist and Buyer’s analysis shall prevail and the analysis of the Independent Lab shall be disregarded if the analysis of the Independent Lab differs from the analysis of Buyer by an amount equal to or less than:
(i) 0.50% moisture
(ii) 0.50% ash on a dry basis
(iii) 100 Btu/lb. on a dry basis (iv) 0.10% sulfur on a dry basis. For each coal quality specification in question, if the analysis of the Independent Lab differs from the analysis of Buyer by an amount more than the amounts listed above, then the analysis of the Independent Lab shall prevail and Buyer’s analysis shall be disregarded. The cost of the analysis made by the Independent Lab shall be borne by Seller to the extent that Buyer’s analysis prevails and by Buyer to the extent that the analysis of the Independent Lab prevails.
Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012.
(b) Where there is a Work Health and Safety Representative they must be elected and will carry out the tasks associated with the role of Work Health and Safety Representative set out within the Work Health and Safety Act 2011.
ARTICLE HEALTH AND SAFETY The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the Home, in order to prevent injury and illness and abide by the Occupational Health and Safety Act as amended from time to time. Scheduled time spent in such meetings is to be considered time worked for which shall be paid by the Employer at his or her regular or overtime rate. Minutes shall be taken of all meetings and copies shall be sent to the Committee members. Minutes of the meetings shall be posted on the workplace health safety bulletin board. The Employer shall provide the time from work with pay and all related tuition costs and expenses necessary to certify the worker representative. Where an inspector makes an inspection of a workplace under the powers conferred upon or her under the Occupational Health and Safety Act, the employer shall afford a certified committee member representing workers the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Where a worker certified member is not on-site and available, the Employer shall afford a worker health and safety representative if any, or a worker selected by a Union, because of knowledge, experience and training, to represent it, the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Two (2) representatives of the Joint Health and Safety Committee, one (I) from management and one (1) from the employees, shall make monthly inspections of the work place and shall report to the health and safety committee the results of their inspection. The members of the Committee who represent the workers shall designate a member representing workers to inspect the workplace. Where possible that member shall be a certified member. The employer shall provide the member with such information and assistance as the member may require for the purpose of carrying out an inspection of the workplace. In the event of accident or injury, such representatives shall be notified immediately and shall investigate and report as soon as possible to the committee and to the Employer on the nature and causes of the accident or injury. Furthermore, such representatives must be notified of the inspection of a government inspector and shall have the right to accompany him on his inspections. Scheduled time spent in all such activities shall be considered as time worked. The Joint Health and Safety Committee and the representatives thereof shall have access to the annual summary of data from the relating to the number of work accident fatalities, the number of lost workday cases, the number of lost workdays, the number of non-fatal cases that required medical aid without lost workdays, the incidence of occupational injuries, and such other data as the may decide to disclose. It is and agreed that no information will be provided to the Committee which is confidential. This information shall be a standing item recorded in the minutes of each meeting. The Union will use its best efforts to obtain the full co-operation of its membership in the compliance of all safety rules and practices. The Employer will use its best efforts to make all affected direct care employees aware of residents who have serious infectious diseases. The nature of the disease need not be disclosed. Employees will be made aware of special procedures required of them to deal with these circumstances. The parties agree that all employees are aware of the requirement to practice universal precautions in all circumstances. The parties further agree that suitable subjects for discussion at the joint Labour Management Committee will include aggressive residents. The Employer will review with the Joint Occupational Health and Safety Committee written policies to 'address the management of violent behaviour. Such policies will include but not be limited to:
D5 Health and Safety The Contractor shall promptly notify the Authority of any health and safety hazards which may arise in connection with the performance of its obligations under the Contract. The Authority shall promptly notify the Contractor of any health and safety hazards which may exist or arise at the Authority’s Premises and which may affect the Contractor in the performance of its obligations under the Contract.
HEALTH AND SAFETY 25.01 The Employer is subject to the provisions of the Occupational Health and Safety Act of the Province of Ontario and its regulations, including the provision that calls for a worker representative selected by the Union on the University Joint Health and Safety Committees. It is agreed that the University and the Union will cooperate to the fullest possible extent in the prevention of accidents and the promotion of safety and health at University workplaces. To this end, the parties acknowledge and agree that all University Employees on University and third-party premises where Employees work, are required to comply with work- site specific policies, procedures, regulations, and standards relating to health and safety.
25.02 The Employer recognizes the right of workers to be informed about hazards in the workplace, to be provided with appropriate training, and the right to refuse unsafe work in accordance with the Occupational Health and Safety Act where there is an immediate danger to the Employee’s health and safety or to the health and safety of others.
25.03 The Union will select a worker representative for each applicable Joint Health and Safety Committee formed under the Occupational Health and Safety Act. Time spent attending meetings of the Committee or carrying out duties as a worker representative shall be considered time worked.
25.04 A worker representative on a Joint Health and Safety Committee may become a certified worker representative on the Committee. The University will provide the required training for certification at no cost to the Employee or the Union. Time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime.
25.05 When a worker representative on a Joint Health and Safety Committee ceases to be employed in the Bargaining Unit, he/she will cease to be a worker representative on the Committee.
25.06 The University will supply, and Employees will wear and/or utilize, personal protective equipment and the other devices that the University requires Employees to wear and/or utilize.
25.07 The Employer shall provide information, training and supervision to an Employee to protect the health and safety of that Employee. With reference to Article 13, time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime.
25.08 The name and contact information of the Health and Safety Officer in each Academic Unit shall be posted in the Department/Academic Unit.
25.09 In accordance with the Occupational Health and Safety Act, persons with authority in the workplace, including any Employees, shall ensure that persons under their authority are informed of health and safety hazards, and advised of policies and procedures associated with the safe handling of materials and equipment.
Health and Safety Plan Consultant shall prepare and submit a Health and Safety Plan (“HASP”) for the portion of Consultant’s work that will involve field work, assessments, or investigations of certain Project elements. The HASP shall describe how Consultant plans to complete field work, assessments, and/or investigations at the RWF. Consultant’s HASP must comply with the CIP HASP and shall be updated as new conditions are encountered.
Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.
ANALYSIS AND MONITORING The Custodian shall (a) provide the Fund (or its duly-authorized investment manager or investment adviser) with an analysis of the custody risks associated with maintaining assets with the Eligible Securities Depositories set forth on Schedule B hereto in accordance with section (a)(1)(i)(A) of Rule 17f-7, and (b) monitor such risks on a continuing basis, and promptly notify the Fund (or its duly-authorized investment manager or investment adviser) of any material change in such risks, in accordance with section (a)(1)(i)(B) of Rule 17f-7.
