Arrangements of approval marks for a vehicle with regard to headlamp cleaners Sample Clauses

Arrangements of approval marks for a vehicle with regard to headlamp cleaners. The above approval mark affixed to a vehicle shows that the vehicle type concerned has been approved in the Netherlands (E 4) pursuant to Regulation No. 45 under the approval number 012439. The first two digits of the approval number indicate that the approval was granted in accordance with the requirements of Regulation No. 45 as amended by the 01 series of amendments. The capacity class is 50. The above approval mark affixed to a vehicle shows that the vehicle type concerned has been approved in the Netherlands (E 4) pursuant to Regulations Nos. 24 and 45*. The first two digits of the approval numbers indicate that, at the dates when the respective approvals were granted, Regulation No. 24 included already the 02 series of amendments and Regulation No. 45 included the 01 series of amendments. The capacity class is 50. * The first number is given merely as an example. Annex 4 Procedure for testing the performance of headlamp cleaners 1. General comments The tests shall be carried out in still air at an ambient temperature of 23 ºC +5 °C. During the various phases of the test, precautions shall be taken to avoid a thermal shock to the headlamp glass. If the manufacturer of the cleaning device has the intention to provide several positions of the cleaning device and the headlamps, only the headlamp in its worst position to the cleaning device must be tested. If a cleaning fluid is used the additional nozzles for the non–simulated side must be present on the test fixture for checking the fluid consumptions. 2. Test equipment