Artists and/or Producer. Directors performing commercial announcements or tags live in shift during emergency situations will not be entitled to fees.
Artists and/or Producer Sample Clauses
Related to Artists and/or Producer
Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group. 5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise. 5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.
Forecasts and Orders 2.2.1 On the Effective Date of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the remainder of the current calendar year (the “Initial Annual Forecast”). Not later than November 30 of each calendar year during the Term of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the next subsequent calendar year (each, an “Annual Forecast”). The Annual Forecast shall be used to establish the per unit and per kilogram pricing for the Martek Products purchased during the relevant calendar year in accordance with Section 2.3.1 and Exhibit A attached hereto; provided that, for the remainder of calendar year 2006, the per kilogram pricing to be used, subject to the year-end adjustment pursuant to Section 2.3.1, shall be * per kilogram, notwithstanding the Initial Annual Forecast. In addition to the foregoing, one (1) month before the commencement of each calendar quarter during the Term of this Agreement, PURCHASER shall provide SELLER with a forecast (a “Rolling Forecast”) of PURCHASER’s requirements for the Martek Product for each of the succeeding four (4) quarters, specifying quantities and requested delivery dates. These forecasts will be PURCHASER’s good-faith, best estimate of requirements and should not be considered a firm commitment. 2.2.2 PURCHASER expressly acknowledges that available supplies of the Martek Product have been in the past, and, may from time to time in the future, be insufficient to meet current demand. Nevertheless, SELLER shall use commercially reasonable efforts to have available for shipment to PURCHASER or to a Designee for PURCHASER’s account such quantities of the Martek Product as PURCHASER forecasts in good faith pursuant to Section 2.2.1 above and any additional quantities which PURCHASER may reasonably request. In case for any reason SELLER cannot or does not supply such quantities of the Martek Products as are forecasted in good faith by PURCHASER pursuant to Section 2.2.1 to PURCHASER, PURCHASER shall be allowed to use an alternative supplier for quantities of Omega-3 and Omega-6 long-chain polyunsaturated fatty acids equal to those quantities of Martek Products that were ordered by PURCHASER pursuant to a Purchase Order and not delivered by SELLER. 2.2.3 PURCHASER shall issue and/or shall direct the Designee(s) to issue formal purchase orders (“Purchase Orders”) at least sixty (60) but no more than ninety (90) days in advance of the date on which PURCHASER or the Designee requests that SELLER ship the Martek Product. SELLER shall accept or reject any such Purchase Order within five (5) business days of receipt, provided that SELLER shall not reject any Purchase Order for any quantities within the most recent forecast. 2.2.4 Purchase Orders which have been accepted by SELLER shall be considered as firm and binding orders (subject to the provisions of Section 2.2.2 above) and shall only be canceled or amended by mutual written agreement of the parties. * CONFIDENTIAL TREATMENT REQUESTED. CONFIDENTIAL PORTION HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.
Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Third Party Users If required by Applicable Laws and Regulations or if the Parties mutually agree, such agreement not to be unreasonably withheld, to allow one or more third parties to use the Connecting Transmission Owner’s Attachment Facilities, or any part thereof, Developer will be entitled to compensation for the capital expenses it incurred in connection with the Attachment Facilities based upon the pro rata use of the Attachment Facilities by Connecting Transmission Owner, all third party users, and Developer, in accordance with Applicable Laws and Regulations or upon some other mutually-agreed upon methodology. In addition, cost responsibility for ongoing costs, including operation and maintenance costs associated with the Attachment Facilities, will be allocated between Developer and any third party users based upon the pro rata use of the Attachment Facilities by Connecting Transmission Owner, all third party users, and Developer, in accordance with Applicable Laws and Regulations or upon some other mutually agreed upon methodology. If the issue of such compensation or allocation cannot be resolved through such negotiations, it shall be submitted to FERC for resolution.
Third Party Use You may allow your agents, contractors and outsourcing service providers (each a “Permitted Third Party”) to use the Product(s) licensed to you hereunder solely for your benefit in accordance with the terms of this XXXX and you are responsible for any such Permitted Third Party’s compliance with this XXXX in such use. Any breach by any Permitted Third Party of the terms of this XXXX will be considered your breach.
RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.
Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.
Third Party Vendors Nothing herein shall impose any duty upon DST in connection with or make DST liable for the actions or omissions to act of the following types of unaffiliated third parties: (a) courier and mail services including but not limited to Airborne Services, Federal Express, UPS and the U.S. Mails, (b) telecommunications companies including but not limited to AT&T, Sprint, MCI and other delivery, telecommunications and other such companies not under the party’s reasonable control, and (c) third parties not under the party’s reasonable control or subcontract relationship providing services to the financial industry generally, such as, by way of example and not limitation, the National Securities Clearing Corporation (processing and settlement services), Fund custodian banks (custody and fund accounting services) and administrators (blue sky and Fund administration services), and national database providers such as Choice Point, Acxiom, TransUnion or Lexis/Nexis and any replacements thereof or similar entities, provided, if DST selected such company, DST shall have exercised due care in selecting the same. Such third party vendors shall not be deemed, and are not, subcontractors for purposes of this Agreement.
Third Party Products 12.1 Third-party products provided to you by NCR Voyix for use with your subscription to the Service are subject to any terms provided by their supplier, including but not limited to those terms and conditions set forth in the exhibits attached hereto. Third-party terms and conditions are subject to change at any time by the supplier, and you agree that your use of such third-party products and services is governed by such supplier’s terms and conditions. You hereby release NCR Voyix from any and all liability associated with any damages or claims arising out of or related to third-party products. UNLESS NCR Xxxxx SPECIFICALLY AGREES OTHERWISE IN WRITING, YOU ACKNOWLEDGE AND AGREE THAT SUCH THIRD-PARTY PRODUCTS ARE PROVIDED “AS-IS” WITHOUT A WARRANTY FROM NCR Voyix. ACCORDINGLY, NCR Voyix EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY NATURE WITH RESPECT TO ANY SUCH THIRD-PARTY PRODUCTS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD-PARTY RIGHTS. 12.2 Third-party products and services may be advertised or made available to you for purchase directly from their supplier by email or other electronic communications, including notifications made through the Service or the Account Portal. Any representations or warranties that may be provided in connection with any such third-party products or services are provided solely by their supplier. NCR Voyix will not be responsible for any of your dealings or interactions with any of those third-party suppliers.
