Bathrooms and kitchen Clause Samples
The 'Bathrooms and kitchen' clause defines the standards and responsibilities related to the maintenance, cleanliness, and use of bathroom and kitchen areas within a property. Typically, it outlines which party—landlord or tenant—is responsible for keeping these areas in good condition, addressing repairs, and ensuring that fixtures and appliances are functional. For example, the clause may require tenants to clean regularly and report any plumbing issues, while landlords may be responsible for major repairs or appliance replacement. This clause ensures that essential living spaces remain safe, hygienic, and operational, thereby preventing disputes and maintaining habitability.
Bathrooms and kitchen. Sanitary wares and fixtures
Bathrooms and kitchen. Sanitary wares and fixtures
a. All toilets except powder room;
i. 1 wash basin fitted under/over / semi recessed with stone/full body tile counter factory moulded with same vitrified counter ledge and a PTMT framed mirror;
ii. 1 wall hung EWC with 6 litre capacity dual flush type concealed cistern with seat and seat cover;
Bathrooms and kitchen. Sanitary wares and fixtures
(j) All toilets except powder room
(a) 1 wash basin fitted under/over /above on marble/granite /Quartz/ Vitrified Tile slab counter or 1 semi recessed wash basin factory moulded with same counter ledges mentioned.
(b) 1 floor mounted EWC/ wall hung EWC also with 6 liter capacity dual flush type vitrified /concealed cistern with seat and seat cover.
(c) A glass partition as per design of the Architect as a partition to segregate shower area from rest of the area shall be provided in all toilets of Tower 18 & only two toilets of other towers.
(d) Facility of vanity Below Washbasin Counter in all Toilets of tower 18 & Only Master toilet of other towers.
(e) A single lever half/quarter turn CP basin mixer in wash basin, a single lever wall mixer with over head shower and a spout in shower area.
(f) 1 CP angle valve along with chrome plated PVC semi rigid/flexible health faucet of standard make.
(g) 2 CP angle valve of standard make for in and out of hot water geyser
(h) 2 angle valves for water connection to wash basin and 1 angle valve for water connection to flushing cistern and 1 bottle trap of standard make PTMT material (i) 1 towel rod, a 3 to 5 mm thick mirror of appropriate size.
Bathrooms and kitchen. Sanitary wares and fixtures
a) All toilets except powder room
Bathrooms and kitchen. Sanitary wares and fixtures
a) All toilets except powder room
b) Staff toilet (wherever applicable)
c) Powder Room (wherever applicable)
Bathrooms and kitchen. Sanitary wares and fixtures
(i) All toilets except powder room
(a) 1 wash basin fitted under/over marble/granite Quartz stone counter or 1 recessed wash basin factory moulded with same vitrified counter ledge
(b) 1 floor mounted EWC with 6 liter capacity dual flush type vitrified cistern with seat and seat cover.
(c) A glass curtain as per design of the Architect (500mm to 700mm) as a partition to segregate shower area from rest of the area shall be provided in master bathroom only.
(d) A single lever half/quarter turn CP basin mixer in wash basin, a single lever wall mixer with over head shower and a spout in shower area.
(e) 1 CP angle valve along with chrome plated PVC semi rigid/flexible health faucet of standard make.
(f) 2 CP angle valve of standard make for in and out of hot water geyser
(g) 2 angle valves for water connection to wash basin and 1 angle valve for water connection to flushing cistern and 1 bottle trap of standard make PTMT material (h) 1 towel rod, a 3 to 5 mm thick mirror of min size 450mmX550 mm
(i) 1 towel rack instead of towel rod shall be provided in master toilet only
(ii) Staff toilet (wherever applicable)
(a) 1 floor mounted EWC with 6 liter capacity dual flush type PVC cistern with white/off white PVC/UPVC seat and seat cover
(b) 1 wash basin and a PTMT framed 400X500 mirror
(c) 1 bib tap in wash basin for cold water only of standard make
(d) 1 bib tap for cold water and 1 bib tap for hot water of standard make are provided in bathing area
(e) 1 angle valve for water connection to wash basin and 1 angle valve for water connection to flushing cistern and;
(f) 1 bottle trap of standard makes PTMT material.
(iii) Powder Room (wherever applicable)
(a) 1 wash basin with 1 pillar cock for cold water (b) 1 floor mounted EWC with 6 liter capacity dual flush type vitrified cistern with seat and seat cover.
Bathrooms and kitchen. Sanitary wares and fixtures
(i) All toilets except powder room
(a) 1 wash basin fitted under/over /above on marble/granite /Quartz/ Vitrified Tile slab counter or 1 semi recessed wash basin factory moulded with same counter ledges mentioned.
(b) 1 floor mounted EWC/ wall hung EWC also with 6 liter capacity dual flush type vitrified /concealed cistern with seat and seat cover.
(c) A glass partition as per design of the Architect as a partition to segregate shower area from rest of the area shall be provided in master bathroom & Guest bathroom only. Facility of vanity Below Washbasin Counter in Master Toilet Only.
Bathrooms and kitchen. Sanitary wares and fixtures
a) All toilets except powder room wash basin fitted under/over marble/granite/quartz/full body tile counter or 1 recessed wash basin and a PTMT framed 450 X 550 mirror floor mounted/wall hung EWC with 6 litre capacity dual flush type vitrified/concealed cistern with seat and seat cover A single lever or half/quarter turn CP basin mixer in wash basin, a single lever or half/quarter turn wall mixer with over head shower and a spout in shower area. 1 CP angle valve along with chrome plated PVC semi rigid/flexible health faucet of standard make. 1 CP angle valve of standard make for inlet of hot water geyser. 2 angle valves for water connection to wash basin and 1 angle valve for water connection to flushing cistern and 1 bottle trap of standard make PTMT material.
1 towel rod, a PTMT framed 3 to 5 mm thick mirror of min size 450mmX600mm. 1 towel rack instead of towel rod shall be provided in master toilet only.
b) Staff toilet (wherever applicable)
c) Powder Room (wherever applicable)
d) Kitchen Notes Sanitary wares: Cera/Neysar/Parryware or equivalent. Bath fittings: A. CP basin mixer like JAL/Continental or equivalent, B. Other angle valve either of CP or PTMT of standard make like Jal/Continental/Prayag or equivalent. Kitchen Water supply fittings: A. sink mixer of Jaquar/Roca/American Standard/Grohe or equivalent. B. Other angle valve either of CP or PTMT of Standard make like Jal
Bathrooms and kitchen. Sanitary wares and fixtures
a) All toilets except powder room
b) Staff toilet (wherever applicable) 1 floor mounted EWC with 6 litre capacity dual flush type PVC cistern with white/off white PVC/UPVC seat and seat cover 1 wash basin with 1 towel ring and a PTMT framed 400X500 mirror 1 bib tap in wash basin for cold water only of standard make 1 bib tap for cold water and of standard make are provided in bathing area 1 angle valve for water connection to wash basin and 1 angle valve for water connection to flushing cistern and 1 bottle trap of standard make PTMT material.
c) Powder Room (wherever applicable) 1 wash basin with 1 pillar cock for cold water 1 floor mounted EWC with 6 litre capacity dual flush type vitrified cistern with seat and seat cover. 1 CP angle valve along with chrome plated PVC semi rigid/flexible health faucet of standard make.