Billing Procedures The Supporting Party will xxxx the Protecting Party for actual costs incurred for Assistance by Hire. Reimbursements will be limited to the provisions of the Agreement and the applicable OP, regardless of whether or not it is authorized on the Resource Order or other documentation produced by the incident. Reimbursable costs may include transportation, salary, overtime, per diem and other approved expenses of Supporting agency personnel. Rates and conditions of use for the equipment and personnel are documented in the OP. Parties shall submit a xxxx within 90 days of the incident. Parties must use their own invoice form for billing under this Agreement to avoid any confusion with other services that may have been ordered under other agreements. Invoices must identify Supporting Party’s name, address, and Taxpayer Identification Number (Department only), fire name, order and request number, and xxxx number and amount. Invoice supporting documentation must include description of services performed, period of services performed, and any applicable cost share agreements. Supporting documentation will itemize details of billing, listing personnel, equipment, travel and per diem, aircraft, supplies and purchases as approved in the attached AOP. It will also include itemized deductions for maintenance and repair of equipment. Department invoices will include “Record of Activities” (FSLA-5) and U.S. Forest Service invoices will include transaction register. Invoices for services under this agreement must be sent to: Name: Xxxx Xxxxxx-Xxxxx, ECC Manager Address: 0000 Xxxxxxxxx Xxxxx Xxxx, Xxxxx, Xxx: Xxxxxxxxxx, XX 00000 Telephone: (000) 000-0000 FAX: (000) 000-0000 Email: xxxxxxxxxxxx@xx.xxx.xx Name: Spalding Community Service District Address: 000-000 Xxxxxxxx Xxx Xxxx, Xxxxx, Xxx: Xxxxxxxxxx, XX 00000 Telephone: (000) 000-0000 FAX: (000) 000-0000 Email: xxxxxxxxxxxxx@xxxxxxx.xxx All bills will have a payment due date 30 days upon receipt. Contested Xxxxxxxx: Written notice that a xxxx is contested will be mailed to the Party within 30 days of receipt of the invoice and will fully explain the contested items. Contested items should be resolved no later than 60 days following receipt of the written notice. Parties are responsible for facilitating resolution of contested xxxxxxxx. Billing requirements and rates are documented in the attached OP.
Procedures for LNP Request The Parties shall provide for the requesting of End Office LNP capability on a reciprocal basis through a written request. The Parties acknowledge that Verizon has deployed LNP throughout its network in compliance with FCC 96-286 and other applicable FCC Regulations.
15.4.1 If Party B desires to have LNP capability deployed in an End Office of Party A, which is not currently capable, Party B shall issue a LNP request to Party A. Party A will respond to the Party B, within ten (10) days of receipt of the request, with a date for which LNP will be available in the requested End Office. Party A shall proceed to provide for LNP in compliance with the procedures and timelines set forth in FCC 00-000, Xxxxxxxxx 80, and FCC 97-74, Paragraphs 65 through 67.
15.4.2 The Parties acknowledge that each can determine the LNP-capable End Offices of the other through the Local Exchange Routing Guide (LERG). In addition, the Parties shall make information available upon request showing their respective LNP-capable End Offices, as set forth in this Section 15.4.
BILLING PROCEDURE a. The Contractor shall submit, not more than semi-monthly, properly completed A-19 vouchers (the "voucher") to one of the following: The Department of Children, Youth, and Families Attn: Xxxxx Xxxx PO Box 40972 Olympia WA 98504-0972 Or, email a scan of an original, signed A-19 voucher directly to the DCYF Contract Manager at Xxxxx.xxxx@xxxx.xx.xxx
b. Payment to the Contractor for approved and completed work shall be made by warrant or Electronic Funds Transfer by DCYF and considered timely if made within 30 days of receipt of a properly completed voucher. Payment shall be sent to the address designated by the Contractor and set forth in this Contract.
c. Each voucher must clearly reference the DCYF Contract Number and the Contractor's Statewide Payee Registration number assigned by the Office of Financial Management (OFM).
d. Properly completed vouchers and attachments completed by the Contractor must contain the information described in Exhibit A under the Section titled "Compensation and Voucher Payment".
Standard Operating Procedures Standard Operating Procedures shall not contravene the Canada Labour Code, the Canadian Human Rights Code, or the Collective Agreement, and an allegation of such contravention is subject to the grievance procedure.
Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.
Referral Procedures Section 1. For Local Unions now having a job referral system as contained in their Collective Bargaining Agreement, the Contractor agrees to utilize such system and it shall be used exclusively by such Contractor, except as it may be modified by this Article. Referrals shall not be affected by obligations of Union membership or the lack thereof. Where airport security clearance requirements apply to work to be performed, the Contractor shall inform the Union’s hiring hall dispatcher of those requirements when requesting workers.
Section 2. In the event that Local Unions are unable to fill any request for employees within the time specified by the local CBAs the Contractor may employ applicants from any other available source. The Contractor shall inform the Union of the name and social security number of any applicants hired from other sources and shall refer the applicant to the Local Union for dispatch to the projects prior to the commencement of work.
Section 3. There shall be no discrimination against any employee or applicant for employment because of his/her membership or non-membership in the union or based upon race, creed, color, sex, age or national origin, or any other legally protected class of such employee or applicant.
Section 4. No employee covered by this Agreement shall be required to join any Union as a condition of being employed on the project; provided, however, that an employee who is a member of the referring union at the time of the referral shall maintain that membership while employed under the Agreement. All employees shall, however, be required to comply with the union security provision of the applicable Collective Bargaining Agreement, for the period during which they are performing on-site work, except as modified by this Agreement. The Contractor agrees to deduct union dues or representation fees, whichever is applicable, from the pay of any employee who executes a voluntary authorization for such deductions and to remit the dues to the Union or Council.
Section 5. The parties agree that where a Contractor is not party to a current Collective Bargaining Agreement with the Union having jurisdiction over the affected work, the Contractor may request by name, and the Local will honor, referral of up to a maximum of five (5) persons per each contractor (“core” employees), provided that the Contractor first demonstrate that those persons possess the following qualifications:
(1) Any license required by state or federal law for the project work to be performed;
(2) Have worked a total of at least one thousand (1,000) hours in the construction craft during the prior three (3) years;
(3) Were on the Contractor’s active payroll for at least sixty (60) out of the one hundred eighty (180) calendar days prior to the contract award;
(4) Have the ability to perform the work safely. The Contractor may elect to hire its first “core” employee to be a xxxxxxx. After the contractor hires his first core employee, the Union will refer to such contractor one journeyman employee from the hiring hall out-of–work list for the affected trade or craft, then refer one of such Contractor’s “core” employees as a journeyman, and shall, alternate, one core employee and one employee from the out-of-work list, until such Contractor’s crew requirements are met or until such Contractor has hired five (5) “core” employees, whichever occurs first. Thereafter, all additional employees in the affected trade or craft shall be hired exclusively from the hiring hall out-of-work list(s). For the duration of the Contractor’s work the ratio of “core” employees to hiring hall referrals shall be maintained and when the Contractor’s workforce is reduced, employees shall be reduced in the same ratio as was applied in the initial hiring. All employees, core and union, shall be dispatched from the appropriate union. Trust benefits shall be paid on all employees, core and union.
Section 6. Upon referral or dispatch from a Union, “turnaround” or refusal of any worker by the Contractors, requires written explanation from the Contractor that shall be communicated from the Prime Contractor to the Port and affected Union within 48 hours.
Section 7. Individual seniority will not be recognized or applied to employees working on the project. This provision will not interfere with or supersede the use by individual Contractors of “call lists” maintained by such Contractor pursuant to addenda to the local Collective Bargaining Agreement between such Contractor and a Union signatory to this Agreement.
Section 8. The selection of craft foremen and/or general foremen and the number of such foremen and/or general foremen required shall be entirely the responsibility of the Contractor. Craft foremen shall be designated working foremen at the request of the Contractor. Craft workers covered by this Agreement will, in the normal day- to-day operations, take their direction and supervision from their xxxxxxx.
Procedures for Advances (a) In the case of the making of any Advance, the repayment of any Advance, or any termination, increase or reduction of the Facility Amount and prepayments of Advances, the Borrower shall give the Administrative Agent a Borrower Notice. Each Borrower Notice shall specify the amount (subject to Section 2.1 hereof) of Advances to be borrowed or repaid and the Funding Date or repayment date (which, in all cases, shall be a Business Day) and whether such Advance is a Revolver Advance or a Swing Advance.
(b) Subject to the conditions described in Section 2.1, the Borrower may request an Advance from the Lenders by delivering to the Administrative Agent at certain times the information and documents set forth in this Section 2.2.
(c) No later than 12:00 noon (New York, New York time) five (5) Business Days prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Borrower shall notify (i) the Collateral Custodian by delivery to the Collateral Custodian of written notice of such proposed Funding Date, and (ii) the Administrative Agent by delivery to the Administrative Agent of a credit report and transaction summary for each Loan that is the subject of the proposed Advance setting forth the credit underwriting by the Originator of such Loan, including without limitation a description of the Obligor and the proposed loan transaction in the form of Exhibit M hereto; provided that, in the case of Advances funding Revolver Loans, the requirements of this Section 2.2(c) shall apply only with respect to the first Advance to be made with respect to each such Revolver Loan. By 5:00 p.m. (New York, New York time) on the next Business Day, the Administrative Agent shall use its best efforts to confirm to the Borrower the receipt of such items and whether it has reviewed such items and found them to be complete and in proper form. If the Administrative Agent makes a determination that the items are incomplete or not in proper form, it will communicate such determination to the Borrower. Failure by the Administrative Agent to respond to the Borrower by 5:00 p.m. (New York, New York time) on the day the related Funding Request is delivered by the Borrower shall constitute an implied determination that the items are incomplete or not in proper form. The Borrower will take such steps requested by the Administrative Agent to correct the problem(s). In the event of a delay in the actual Funding Date due to the need to correct any such problems, the Funding Date shall be no earlier than two (2) Business Days after the day on which the Administrative Agent confirms to the Borrower that the problems have been corrected.
(d) No later than 1:00 p.m. (New York, New York time) one (1) Business Day prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Administrative Agent, each Managing Agent and the Collateral Custodian, as applicable, shall receive or shall have previously received the following:
(i) a Funding Request in the form of Exhibit A;
(ii) a wire disbursement and authorization form shall be delivered to the Administrative Agent; and
(iii) a certification substantially in the form of Exhibit H concerning the Collateral Custodian’s receipt of certain documentation relating to the Eligible Loan(s) related to such Advance shall be delivered to the Administrative Agent, which may be delivered either as a separate document or incorporated in the Monthly Report. Each Funding Request for a Revolver Advance shall specify the aggregate amount of the requested Advance, which shall be in an amount equal to at least $500,000.
(e) No later than 12:00 noon (New York, New York time) on the Business Day proposed for a Swing Advance, the Administrative Agent shall receive or shall have previously received the following:
(i) a Funding Request in the form of Exhibit A; and
(ii) a wire disbursement and authorization form.
(f) Each Funding Request shall be accompanied by (i) a Borrower Notice, depicting the outstanding amount of Advances under this Agreement and representing that all conditions precedent for a funding have been met, including a representation by the Borrower that the requested Advance shall not, on the Funding Date thereof, exceed the Availability on such day, (ii) a calculation of the Borrowing Base as of the applicable Funding Date (which calculation may, for avoidance of doubt, take into account (A) Loans which will become Transferred Loans on or prior to such Funding Date and (B) an updated Loan List including each Loan that is subject to the requested Advance, (C) the proposed Funding Date, and (D) wire transfer instructions for the Advance; provided, however, the Funding Request for a Swing Advance shall be required to contain only the information described in Section 2.2(e)(i) and (ii) above. A Funding Request shall be irrevocable when delivered; provided however, that if the Borrowing Base calculation delivered pursuant to clause (ii) above includes a Loan which does not become a Transferred Loan on or before the applicable Funding Date as anticipated, and the Borrower cannot otherwise make the representations required pursuant to clause (i) above, the Borrower shall revise the Funding Request accordingly, and shall pay any loss, cost or expense incurred by any Lender in connection with the broken funding evidenced by such revised Funding Request.
(g) On the Funding Date following the satisfaction of the applicable conditions set forth in this Section 2.2 and Article III, the Lenders shall make available to the Administrative Agent at its address listed beneath its signature on its signature page to this Agreement (or on the signature page to the Joinder Agreement pursuant to which it became a party hereto), for deposit to the account of the Borrower or its designee in same day funds, at the account specified in the Funding Request, an amount equal to such Lender’s ratable share of the Advance then being made (except that in the case of a Swing Advance, the Swingline Lender will make available to the Borrower the amount of any such Swing Advance). Each wire transfer of an Advance to the Borrower shall be initiated by the applicable Lender no later than 3:00 p.m. (New York, New York time) on the applicable Funding Date.
Important Information About Procedures for Opening a New Account To help the government fight the funding of terrorism and money laundering activities, Federal law requires all financial organizations to obtain, verify, and record information that identifies each person who opens an account. What this means for you: When you open an account, you are required to provide your name, residential address, date of birth, and identification number. We may require other information that will allow us to identify you.
Testing Procedures Testing will be conducted by an outside certified Agency in such a way to ensure maximum accuracy and reliability by using the techniques, chain of custody procedures, equipment and laboratory facilities which have been approved by the U.S. Department of Health and Human Services. All employees notified of a positive controlled substance or alcohol test result may request an independent test of their split sample at the employee’s expense. If the test result is negative the Employer will reimburse the employee for the cost of the split sample test.
New Procedures New procedures as to who shall provide certain of these services in Section 1 may be established in writing from time to time by agreement between the Fund and the Transfer Agent. The Transfer Agent may at times perform only a portion of these services and the Fund or its agent may perform these services on the Fund's behalf;
