Boiler and Machinery Insurance The Owner shall have the option of purchasing and maintaining boiler and machinery insurance required by the Contract Documents or by law, which shall specifically cover such insured objects during installation and until final acceptance by the Owner. If purchased this insurance shall include interests of the Owner, Contractor, Subcontractors and Sub-subcontrators in the Work.
Comprehensive Automobile Liability Insurance for coverage of owned and non-owned and hired vehicles, trailers or semi-trailers licensed for travel on public roads, with a minimum combined single limit of One Million Dollars ($1,000,000) each occurrence for bodily injury, including death, and property damage.
Aircraft Liability Insurance (i) Except as provided in clause (ii) of this subsection (a), and subject to the rights of Company to establish and maintain self-insurance in the manner and to the extent specified in Section 7.06(c), Company will carry, or cause to be carried, at no expense to Loan Trustee, aircraft liability insurance (including, but not limited to, bodily injury, personal injury and property damage liability, exclusive of manufacturer's product liability insurance) and contractual liability insurance with respect to the Aircraft (A) in amounts that are not less than the aircraft liability insurance applicable to similar aircraft and engines in Company's fleet on which Company carries insurance; provided that such liability insurance shall not be less than the amount certified in the insurance report delivered to Loan Trustee on the Closing Date, (B) of the type covering the same risks as from time to time applicable to aircraft operated by Company (or, if a Lease is then in effect, by the Permitted Lessee) of the same type as the Aircraft, and (C) that is maintained in effect with insurers of recognized responsibility. Any policies of insurance carried in accordance with this Section 7.06(a) and any policies taken out in substitution or replacement for any of such policies shall: (A) name Loan Trustee, Subordination Agent, each Pass Through Trustee, Policy Provider and Liquidity Provider as their Interests (as defined below in this Section 7.06) may appear, as additional insured (the "Additional Insureds"), (B) subject to the condition of clause (C) below, provide that, in respect of the interest of the Additional Insureds in such policies, the insurance shall not be invalidated by any action or inaction of Company and shall insure the Additional Insureds' Interests as they appear, regardless of any breach or violation of any warranty, declaration or condition contained in such policies by Company, (C) provide that, if such insurance is canceled for any reason whatever, or if any change is made in the policy that materially reduces the amount of insurance or the coverage certified in the insurance report delivered on the Closing Date to Loan Trustee, Policy Provider and Liquidity Provider, or if such insurance is allowed to lapse for nonpayment of premium, such cancellation, change or lapse shall not be effective as to any Additional Insured for 30 days (seven days, or such other period as is then generally available in the industry, in the case of any war risk or allied perils coverage) after receipt by such Additional Insured of written notice from such insurers of such cancellation, change or lapse, (D) provide that the Additional Insureds shall have no obligation or liability for premiums, commissions, assessments or calls in connection with such insurance, (E) provide that the insurers shall waive any rights of (1) set-off, counterclaim or any other deduction, whether by attachment or otherwise, in respect of any liability of the Additional Insureds to the extent of any moneys due to the Additional Insureds and (2) subrogation against the Additional Insureds to the extent that Company has waived its rights by its agreements to indemnify the Additional Insureds pursuant to the Operative Documents, (F) be primary without right of contribution from any other insurance carried by any Additional Insured with respect to its Interests as such in the Aircraft and (G) expressly provide that all of the provisions thereof, except the limits of liability, shall operate in the same manner as if there were a separate policy covering each insured. "Interests" as used in this Section 7.06(a) and in Section 7.06(b) with respect to any Person means the interests of such Person in the transactions contemplated by the Operative Documents. In the case of a lease or contract with any government in respect of the Aircraft or any Engine, or in the case of any requisition for use of the Aircraft or any Engine by any government, a valid agreement by such government to indemnify Company, or an insurance policy issued by such government, against any of the risks that Company is required to insure against hereunder shall be considered adequate insurance for purposes of this Section 7.06(a) to the extent of the risks (and in the amounts) that are the subject of such indemnification or insurance.
OWNER'S LIABILITY INSURANCE The Owner shall be responsible for purchasing and maintaining the Owner’s usual liability insurance.
Excess Liability Insurance $___________________ minimum required insurance policy for anything other than General Liability or Automobile coverage. ☐ - Additional Insurance Requirement: Client, Contractor, and any other entity which the Contractor is required to name as an additional insured under the Prime Contract shall be named as additional insureds under the General Liability Insurance required by this Section and any such insurance afforded to the additional insureds shall apply as primary insurance. Any other insurance maintained by the Client or Contractor shall be excess insurance and shall not be called upon to contribute to Subcontractor’s primary or excess insurance carrier’s duty to defend or indemnify unless required by law. The excess insurance required above shall also afford additional insured protection to Client and Contractor. This Section shall in no event be construed to require that additional insured insurance coverage be provided to a greater extent than permitted under the statutes or public policy governed under State law. Certificates of Insurance. Certificates of insurance, and the required additional insured and other endorsements, including waivers of subrogation shall be furnished to Contractor before the performance of any Services.
LESSEE'S LIABILITY INSURANCE (fill in) The LESSEE shall maintain with respect to the leased premises and the property of which the leased premises are a part comprehensive public liability insurance in the amount of $1,000,000.00 with property damage insurance in limits of $1,000,000.00 in responsible companies qualified to do business in Massachusetts and in good standing therein insuring the LESSOR as well as LESSEE against injury to person or damage to property as provided. The LESSEE shall deposit with the LESSOR certificates for such insurance at or prior to the commencement of the term, and thereafter within thirty (30) days prior to the expiration of any such policies. All such insurance certificates shall provide that such policies shall not be cancelled without at least ten (10) days prior written notice to each assured named therein.
Automobile Liability Insurance Automobile Liability insurance covering bodily injury and property damage in an amount no less than one million dollars ($1,000,000) combined single limit for each occurrence. Covered vehicles shall include owned, non-owned, and hired automobiles/trucks.
HEATING, VENTILATING AND AIR CONDITIONING General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the weather conditions identified in Chapter 13, “Energy Conservation” of the 1996 BOCA Building Code and supplemented by the “Building Code Rules”. All HVAC equipment shall be commercial or light industrial grade. If new construction it shall be installed at grade or within mechanical rooms for easy access and maintenance. If existing construction, roof mounted equipment will be considered after all other options have been exhausted, including the elimination of noise and vibration transfer to the structural members. The HVAC systems shall be zoned, with units sized and placed as required by heating and cooling loads on the building. Zoning of systems is dependent on the size, shape and orientation of the building. The HVAC system shall be divided into a minimum of 4 exterior and 1 interior temperature control zones. Return air shall be taken from the area supplied or adjacent to the area in the same temperature control zone. The ventilation and exhaust system shall be sized to maintain a positive pressure throughout the building envelope to limit air and dust infiltration. No HVAC ductwork shall be installed under the floor slab or underground.
Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.
