Brake Pedal Sample Clauses

Brake Pedal. The floor mounted brake pedal shall be 10 to 12 inches long and 3 to 4 inches wide and positioned between 1 and 2 inches from the accelerator pedal when measured at the heel of the pedals. The angle of the brake pedal shall be determined from a horizontal plane regardless of the slope of the cab floor. The brake pedal shall be positioned at an angle of 44 to 50° at the point of initiation of contact, and extend downward to an angle of 18 to 22° at full depression. The force to depress the brake pedal shall be measured at the midpoint of the brake pedal. The brake pedal force shall be no less than 10 foot-pounds and no more than 50 foot-pounds.
AutoNDA by SimpleDocs
Brake Pedal a) The height, play, and full depression of the brake pedal shall be correct, and the clearance between it and the floorboard shall not be less than 25% of the overall stroke of the pedal. (For an air brake, /Z 34 -t- € the play of its pedal shall not exceed 20 mm). b) The brake pedal shall be free from backlash in the axial direction, and shall not produce any unusual noise when depressed c) The brake pedal shall be provided with a mechanism to prevent sfipping or a rubber pad. d) The brake system shall be free from oil leakage and the ingress of air.

Related to Brake Pedal

  • VOETSTOOTS The PROPERTY is sold: 8.1. Voetstoots in accordance with the Sectional Plan and the participation quota endorsed thereon with the opening of the Sectional Title Register, or as they are endorsed already, and any amendments or adjustments thereto from time to time in accordance with the terms of the Act and without any warranties express or implied, the SELLER shall not be liable for any patent or latent defects. Should the extent of the Section or of the PROPERTY differ from that which is contained in the title deed or sectional plan or any amendment thereto, the SELLER shall not be liable for any shortfall or be entitled to any compensation for any surplus. 8.2. Subject to all the conditions and Regulations of the Act. 8.3. The PURCHASER acknowledges that this is not a construction contract and that he is purchasing a completed unit. The PURCHASER shall not have the right to interfere in any way with the building operations of the SELLER’S employees. He shall also have no right to retention. This Clause is also applicable in the case of the bank holding back any retention amount out of its own accord or on request of the PURCHASER. 8.4. The SELLER undertakes to erect the unit according to the general building standards as set by Financial Institutions. The unit is be registered with the NHBRC. 8.5. Should a dispute arise or be declared, such dispute shall be resolved by an Arbitrator appointed by the Developer. The costs in respect thereof shall be borne by the unsuccessful party. Pending the outcome of the dispute, the PURCHASER shall be obliged to pay the outstanding amount to the Conveyancers who shall hold it in trust.

  • Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.

  • Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)

  • AT&T-12STATE acknowledges that CLEC may have an embedded base of one-way trunks ordered and installed prior to the Effective Date of this Agreement that were used for termination of CLEC’s Section 251(b)(5)/IntraLATA Toll Traffic to AT&T-12STATE (Embedded Base). To the extent that CLEC has such an Embedded Base, CLEC shall only augment trunk groups in the Embedded Base with the mutual agreement of the Parties. CLEC shall not order any new one-way trunk groups following the Effective Date of this Agreement. Moreover, the Parties agree that the Embedded Base will be converted to two-way trunk groups under the following circumstances: 4.2.1.1 With reasonable notification from AT&T-12STATE and upon AT&T-12STATE’s request, CLEC shall convert all of its Embedded Base to two-way trunks. 4.2.1.2 At any time an Embedded Base trunk group (either originating or terminating) requires augmentation, AT&T-12STATE can require the associated originating and terminating trunks to be converted to a single two-way trunk group prior to the augmentation. 4.2.1.3 When any network changes are to be performed on a project basis (i.e., central office conversions, tandem re-homes, etc.), upon request and reasonable notice by AT&T-12STATE, CLEC will convert all of its Embedded Base affected by the project within the intervals and due dates required by the project parameters. 4.2.1.4 In addition to the foregoing, CLEC may choose, at any time, to convert its Embedded Base to two-way trunk groups. 4.2.1.5 The Parties will coordinate any trunk group migration, trunk group prioritization and implementation schedule. AT&T-12STATE agrees to develop a cutover plan within thirty (30) days of notification to CLEC of the need to convert pursuant to Section 4.2.1.1 above and Section 4.2.1.3 above.

  • COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • Workstation/Laptop encryption All workstations and laptops that process and/or store DHCS PHI or PI must be encrypted using a FIPS 140-2 certified algorithm which is 128bit or higher, such as Advanced Encryption Standard (AES). The encryption solution must be full disk unless approved by the DHCS Information Security Office.

  • Pendahuluan Industri perbankan syari’ah di Indonesia tengah memasuki fase growth (pertumbuhan) xxx sangat membutuhkan kepercayaan xxx loyalitas masyarakat untuk terus meningkatkan produktivitasnya. Kepercayaan xxx loyalitas mutlak dibutuhkan untuk memasuki fase maturity perbankan syariah dalam menghadapi kompetisi global. Kepercayaan xxx loyalitas tidak dapat diperoleh tanpa adanya produk- produk yang mampu menjawab kebutuhan masyarakat. Produk bank syariah sudah semestinya mampu memenuhi seluruh komponen masyarakat, baik dalam produk funding, financing, xxx services. Oleh karenanya, inovasi produk bank syariah menjadi syarat mutlak sebagai indikator bahwa bank syariah mampu beradaptasi dengan kebutuhan manusia modern. Inovasi produk merupakan salah satu unsur penting untuk dapat menjaga sustainabilitas perusahaan. Inovasi produk merepresentasikan kemampuan perusahaan untuk dapat memenuhi kebutuhan pasar sekaligus sebagai upaya untuk memperoleh keuntungan perusahaan. Bank syariah pada dasarnya telah melakukan serangkaian upaya inovasi, salah satunya adalah dengan melakukan “rekayasa” (engineering) terhadap akad- akad dalam fiqh muamalah. Beberapa akad dalam fiqh muamalah tidak begitu saja diadopsi oleh perbankan syariah, namun juga “diadaptasikan” dengan kebutuhan masyarakat terhadap xxxx-xxxx perbankan. Rekayasa xxx adaptasi ini memang sebuah keniscayaan, karena jika adopsi dilakukan secara apa adanya maka produk bank syariah diragukan dapat memberikan manfaat yang tepat bagi masyarakat. Prinsip keleluasan bermuamalah dalam Islam merupakan modal utama untuk menghadapi kompleksitas permasalahan ekonomi serta besarnya tuntutan masyarakat akan peran perbankan syariah.1 Dalam rangka memenuhi kebutuhan masyarakat xxx mengembangkan industri perbankan xxx keuangan xxxx xxxx kompetitif, inovasi dalam berbisnis yang dilakukan oleh perbankan syariah melalui serangkaian adaptasi tersebut memang sudah menjadi tuntutan bisnis. Sebagai contoh dapat dikemukakan xxxxxx xxxx kartu kredit syariah, asuransi syariah, obligasi syariah, FX iB, xxx Islamic Swap. Produk-produk dalam kegiatan keuangan syariah tersebut mengandung beberapa akad. Sebagai contoh, dalam transaksi kartu kredit syariah terdapat akad ijarah, qardh, xxx kafalah. Obligasi syariah mengandung sekurang-kurangnya akad mudharabah (atau ijarah) xxx wakalah, serta terkadang disertai kafalah atau wa’d. Islamic swap mengandung beberapa kali akad tawarruq, bay‘, wakalah, xxxxx, xxx terkadang disertai wa’d.2 Dalam setiap transaksi, akad-akad tersebut dilakukan secara bersamaan atau setidak-tidaknya setiap akad yang terdapat dalam suatu produk tidak bisa ditinggalkan, karena kesemuanya merupakan satu kesatuan. Transaksi seperti 1 Xxxxxx Xxxxx Xxxxxx, “Konstruksi Akad dalam Pengembangan Produk Perbankan Syariah di Indonesia”, Al-‘Adalah, Vol. 12, No. 3 (Juni, 2015), 493. 2 Xxxxxxxxx Xxxxxxx, “Multiakad dalam Transaksi Syariah Kontemporer pada Lembaga Keuangan Syariah di Indonesia”, Al-Iqtishad, Vol. 3, No. 1 (Januari, 2011), 156. inilah yang dikenal dengan istilah multiakad (Indonesia) atau hybrid contract (Inggris) atau al-’uqud al-murakkabah (Arab). Hybrid contract merupakan perbincangan yang masih hangat dikalangan para cendikiawan muslim untuk menentukan keabsahan hukumnya. Pendapat pertama mengatakan hukumnya mubah berdasar kaidah fiqh al-ashlu fi al-mu’amalat al-ibahah (hukum asal muamalah adalah boleh). Pendapat kedua mengharamkan berdasarkan dengan hadits-hadits yang mengharamkan dua jual beli dalam satu jual beli (bai’ataini fi bai’atin), atau mengharamkan dua akad dalam satu akad (shafqatain fi shafqatin).3 Sebagai entitas bisnis yang menjadi bagian penting dalam sistem ekonomi syariah sebagai induknya, tentunya industri perbankan syariah tidak boleh keluar dari nilai-nilai syariah. Melakukan inovasi memang tuntutan bisnis, namun menjaga shariah compliance juga menjadi kewajiban bagi setiap pelaku bisnis syariah, tidak terkecuali perbankan syariah. Profit-oriented hanya boleh dijadikan sebagai media (tool) untuk mencapai tujuan (goal), yaitu benefit-oriented. Produk bank syari’ah seyogyanya memiliki multi benefit, yaitu: material benefit, emotional benefit, xxx spiritual benefit.4 Mengacu pada kondisi tersebut, maka inovasi produk perbankan syariah setidaknya memerhatikan inovasi dalam dua dimensi, yaitu dimensi ekonomi xxx dimensi sosial. Inovasi dalam dimensi ekonomi artinya bahwa produk perbankan syariah harus mampu menghadirkan produk yang sesuai dengan kebutuhan masyarakat, sehingga bank syariah menjadi pilihan utama masyarakat. Jika hal ini dapat dilakukan, maka fungsi-fungsi bank syariah akan mampu memainkan perannya sebagai intermediary institution. Pada dimensi sosial, sebagai produsen jasa keuangan syariah, bank syariah bertanggung jawab untuk melakukan edukasi terhadap perilaku masyarakat. Bank syariah xxx masyarakat xxxxxx melekat xxx memengaruhi satu dengan yang lain. Pada satu sisi, bank syariah melalui pola inovasinya harus mampu “men-syariah- kan” perilaku masyarakat, khususnya yang berhubungan dengan lembaga 3 Najamuddin, “Al-‘Uqud Al-Murakkabah dalam Perspektif Ekonomi Syariah”, Jurnal Syariah, Vol. 2, No. 2 (Oktober, 2013), 6.

  • SBC-12STATE 47.1.1 The terms contained in this Agreement and any Appendices, Attachments, Exhibits, Schedules, and Addenda constitute the entire agreement between the Parties with respect to the subject matter hereof, superseding all prior understandings, proposals and other communications, oral or written between the Parties during the negotiations of this Agreement and through the execution and/or Effective Date of this Agreement. This Agreement shall not operate as or constitute a novation of any agreement or contract between the Parties that predates the execution and/or Effective Date of this Agreement.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • Wet Weather In the event of wet weather, work in the open will continue until the particular work in hand can no longer be done safely and efficiently. Whilst it is raining, employees will be required to: Continue to work under cover or relocate to alternative work under cover, on site. Obtain materials and services for employees working under cover where there is only minimal exposure to inclement weather. When required, perform emergency and safety work. In addition, work on unexpected breakdowns, which can be corrected in limited time duration. Should a portion of the project be affected by wet weather, all other employees not so affected shall continue working in accordance with award conditions, regardless that some employees may be entitled to cease work due to wet weather. If a halt to productive work occurs due to inclement weather, the parties agree that employees may be relocated to other unaffected sites. Where the above steps are not possible, affected employees may be required to attend tool box meetings, work planning sessions or skills development activities, all of which will count as productive time for payment purposes.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!