Common use of Buy America Clause in Contracts

Buy America. The CONTRACTOR agrees to comply with 49 U.S.C. 5323(j) and 49 C.F.R. Part 661, which provide that Federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver. Separate requirements for rolling stock are set out at 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11. Rolling stock must be assembled in the United States and have more than 60 percent domestic content for vehicles delivered in FY 2016 and FY 2017; more than 65 percent domestic content for vehicles delivered in FY 2018 and FY 2019 and more than 70 percent domestic content for vehicles delivered in FY 2020 and beyond. A bidder or offeror must submit to the FTA contractor the appropriate Buy America certification (below) with all bids or offers on FTA-funded contracts, except those subject to a general waiver. Bids or offers that are not accompanied by a completed Buy America certification must be rejected as nonresponsive. This requirement does not apply to lower tier subcontractors. Certification requirement for procurement of steel, iron, or manufactured products. Certificate of Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it will meet the requirements of 49 U.S.C. 5323(j)(1) and the applicable regulations in 49 CFR Part 661.5. Date _______________________________________________________________ Signature____________________________________________________________ Company Name_______________________________________________________ Title ________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(1) and 49 C.F.R. 661.5, but it may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________ Certification requirement for procurement of buses, other rolling stock and associated equipment. Certificate of Compliance with 49 U.S.C. 5323(j)(2)(C). The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and the regulations at 49 C.F.R. Part 661.11. Date _________________________________________________________________ Signature _____________________________________________________________ Company Name ________________________________________________________ Title _________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(2)(C) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11, but may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________

Buy America. The CONTRACTOR agrees to comply with 49 U.S.C. 5323(j) and 49 C.F.R. Part 661, which provide that Federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver. Separate requirements for rolling stock are set out at 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11. Rolling stock must be assembled in the United States and have more than 60 percent domestic content for vehicles delivered in FY 2016 and FY 2017; more than 65 percent domestic content for vehicles delivered in FY 2018 and FY 2019 and more than 70 percent domestic content for vehicles delivered in FY 2020 and beyond. A bidder or offeror must submit to the FTA contractor the appropriate Buy America certification (below) with all bids or offers on FTA-funded contracts, except those subject to a general waiver. Bids or offers that are not accompanied by a completed Buy America certification must be rejected as nonresponsive. This requirement does not apply to lower tier subcontractors. Certification requirement for procurement of steel, iron, or manufactured products. Certificate of Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it will meet the requirements of 49 U.S.C. 5323(j)(1) and the applicable regulations in 49 CFR Part 661.5. Date _______________________________________________________________ Signature____________________________________________________________ Signature Company Name_______________________________________________________ Name Title ________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(1) and 49 C.F.R. 661.5, but it may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________ Certification requirement for procurement of buses, other rolling stock and associated equipment. Certificate of Compliance with 49 U.S.C. 5323(j)(2)(C). The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and the regulations at 49 C.F.R. Part 661.11. Date _________________________________________________________________ Signature _____________________________________________________________ Company Name ________________________________________________________ Title _________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(2)(C) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11, but may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________Title

Buy America. The CONTRACTOR Contractor agrees to comply with 49 U.S.C. 5323(j) and 49 C.F.R. Part 661, which provide that Federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver. General waivers are listed in 49 C.F.R. 661.7, and include final assembly in the United States for 15 passenger vans and 15 passenger wagons produced by the Chrysler Corporation, and microcomputer equipment and software. Separate requirements for rolling stock are set out at 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11. Rolling stock must be assembled in the United States and have more than 60 percent domestic content for vehicles delivered in FY 2016 and FY 2017; more than 65 percent domestic content for vehicles delivered in FY 2018 and FY 2019 and more than 70 percent domestic content for vehicles delivered in FY 2020 and beyond. A bidder or offeror must submit to the FTA contractor recipient the appropriate Buy America certification (below) with all bids or offers on FTA-funded contracts, except those subject to a general waiver. Bids or offers that are not accompanied by a completed Buy America certification must be rejected as nonresponsive. This requirement does not apply to lower tier subcontractors. Certification requirement Certificates for procurement Use of steel, iron, or iron and manufactured products. products Certificate of Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it will meet the requirements of 49 U.S.C. 5323(j)(1) and the applicable regulations in 49 CFR C.F.R. Part 661.5. Date _______________________________________________________________ Signature____________________________________________________________ Date: Company Name_______________________________________________________ Title ________________________________________________________________ : Print Name: Title: Signature: Certificate of Non-Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(1) and 49 C.F.R. 661.5, but it may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Date: Company Name _________________________________________________________ Title __________________________________________________________________ Certification requirement for procurement of buses, other rolling stock and associated equipment. Certificate of Compliance with 49 U.S.C. 5323(j)(2)(C). The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and the regulations at 49 C.F.R. Part 661.11. Date _________________________________________________________________ Signature _____________________________________________________________ Company Name ________________________________________________________ Title _________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(2)(C) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11, but may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________Name: Print Name: Title: Signature:

Buy America. The CONTRACTOR Subgrantee agrees to comply with 49 U.S.C. 5323(j) and 49 C.F.R. Part 661, which provide that Federal federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver. General waivers are listed in 49 C.F.R. 661.7, and include final assembly in the United States for 15 passenger vans and 15 passenger wagons produced by Chrysler Corporation, and microcomputer equipment and software. Separate requirements for rolling stock are set out at 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11. Rolling stock must be assembled in the United States and have more than a 60 percent domestic content for vehicles delivered in FY 2016 and FY 2017; more than 65 percent domestic content for vehicles delivered in FY 2018 and FY 2019 and more than 70 percent domestic content for vehicles delivered in FY 2020 and beyondcontent. A bidder or offeror must submit to the FTA contractor recipient the appropriate Buy America certification (below) with all bids or offers on FTA-funded contracts, except those subject to a general waiver. Bids or offers that are not accompanied by a completed Buy America certification must be rejected as nonresponsive. This requirement does not apply to lower tier subcontractors. Certification requirement for procurement of steel, iron, or manufactured products. Certificate of Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it will meet the requirements of 49 U.S.C. 5323(j)(1) and the applicable regulations in 49 CFR C.F.R. Part 661.5. Date _______________________________________________________________ Signature____________________________________________________________ Signature Company Name_______________________________________________________ Name Title ________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(1) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(1) and 49 C.F.R. 661.5, but it may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________ Certification requirement for procurement of buses, other rolling stock and associated equipment. Certificate of Compliance with 49 U.S.C. 5323(j)(2)(C). The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and the regulations at 49 C.F.R. Part 661.11. Date _________________________________________________________________ Signature _____________________________________________________________ Company Name ________________________________________________________ Title _________________________________________________________________ Certificate of Non-Compliance with 49 U.S.C. 5323(j)(2)(C) The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. 661.11, but may qualify for an exception pursuant to 49 U.S.C. 5323(j)(2)(A), 5323(j)(2)(B), or 5323(j)(2)(D), and 49 C.F.R. CFR 661.7. Date __________________________________________________________________ Signature ______________________________________________________________ Company Name _________________________________________________________ Title __________________________________________________________________Title