Shipments All Products delivered pursuant to the terms of this Agreement shall be suitably packed for shipment in accordance with the Specifications and marked for shipment to Customer’s destination specified in the applicable purchase order. Shipments will be made EXW (Ex-Works, Incoterms 2000) Flextronics’s facility, at which time risk of loss and title will pass to Customer. All freight, insurance and other shipping expenses, as well as any special packing expenses not included in the original quotation for the Products, will be paid by Customer. In the event Customer designates a freight carrier to be utilized by Flextronics, Customer agrees to designate only freight carriers that are currently in compliance with all applicable laws relating to anti-terrorism security measures and to adhere to the C-TPAT (Customs-Trade Partnership Against Terrorism) security recommendations and guidelines as outlined by the United States Bureau of Customs and Border Protection and to prohibit the freight carriage to be sub-contracted to any carrier that is not in compliance with the C-TPAT guidelines.
Shipment If any of the Major Components associated with any Unit is not Shipped on or before (with the prior approval of the Buyer) the Scheduled Major Component Shipment Date set forth in Attachment 1 for reasons attributable to the Seller and not excused elsewhere in this Contract, the Seller shall pay as liquidated damages, and not as a penalty, a sum calculated in accordance with the table below for each Unit for each day of delay after the Scheduled Major Component Shipment Date as set forth in Attachment 1 until actual Shipment of the last Major Component for such Unit: Days after Scheduled Major Component Shipment Date Liquidated Damages (per day or partial day) *** *** *** *** *** *** Such liquidated damages, if any, shall be computed based on the date of Shipment of the last Major Component for a given Unit and such computations shall disregard any part of or accessory to the Major Component which may be shipped separately and arrive later unless such part of or accessory to the Major Component is necessary for the installation of the Major Component.
Scheduled Maintenance No later than March 1, 2001, Seller shall submit to Buyer a proposed schedule of Scheduled Maintenance Outages scheduled by Seller for the following Contract Year for the Units, which schedule shall be updated by Seller by each March 31 and September 30 thereafter to cover the twelve month period following each such update; provided, however, that no Scheduled Maintenance Outage may be scheduled to cover the period from May 15 to September 15. Parameters within which Scheduled Maintenance Outages must be planned are included as Appendix I. If the OEM issues recommendations for changes to the parameters in Appendix I, the parties shall negotiate in good faith to revise Appendix I accordingly. Such schedule, and each supplement thereto, shall indicate the planned start and completion dates for each Scheduled Maintenance Outage during the period covered thereby and the amount of the Net Dependable Capacity of a Unit that will be affected. Within thirty (30) days of receipt of such schedule or any supplement thereto, Buyer may request reasonable modifications in the Scheduled Maintenance Outage schedule contained therein. Both parties agree to use reasonable efforts to develop a mutually acceptable final schedule for such Scheduled Maintenance Outages. If within six months prior to the scheduled start of a Scheduled Maintenance Outage, Buyer desires to change the scheduled start or duration of such Scheduled Maintenance Outage, Buyer shall notify Seller of Buyer's requested change and Seller shall use reasonable efforts to accommodate Buyer's requested change. Seller may propose compensation from Buyer to Seller for such change. Buyer shall then have the right to either direct such change and pay Seller such compensation, or withdraw the request for such change. At least one week prior to any Scheduled Maintenance Outage, Seller shall orally notify Buyer of the expected start date of such Scheduled Maintenance Outage, the amount of Capacity at the Units that will not be available to Buyer during such Scheduled Maintenance Outage, and the expected completion date of such Scheduled Maintenance Outage. Seller shall orally notify Buyer of any subsequent changes in such Capacity not available or any subsequent changes in the Scheduled Maintenance Outage completion date. As soon as practicable, all such oral notifications shall be confirmed in writing. Scheduled Maintenance Outages may be taken in any number of non-contiguous periods, subject to Buyer's approval, which shall not be unreasonably withheld or delayed. Subject to the foregoing, the duration, frequency and timing of Scheduled Maintenance Outages shall be based on OEM recommendations and the age and operation of the Units generally plus up to five (5) days per Unit on a semi-annual basis for Non-Summer Period balance of plant maintenance.
Installation Tenant may install and use Tenant's Lines and make connections and disconnections at the terminal blocks as described above, provided Tenant shall: (i) obtain Landlord's prior written approval of all aspects thereof, (ii) use an experienced and qualified contractor designated or approved in writing in advance by Landlord (whom Landlord may require to enter an access and indemnity agreement on Landlord's then standard form of agreement therefor), (iii) comply with such inside wire standards as Landlord may adopt from time to time, and all other provisions of this Lease, including Paragraph 8 respecting alterations, and the Building rules respecting access to the wire closets, (iv) not install Lines in the same sleeve, chaseway or other enclosure in close proximity with electrical wire, and not install PVC-coated Lines under any circumstances, (v) thoroughly test any riser Lines to which Tenant intends to connect any Lines to ensure that such riser Lines are available and are not then connected to or used for telephone, data transmission or any other purpose by any other party (whether or not Landlord has previously approved such connections), and not connect to any such unavailable or connected riser Lines, and (vi) not connect any equipment to the Lines which may create an electromagnetic field exceeding the normal insulation ratings of ordinary twisted pair riser cable or cause radiation higher than normal background radiation, unless the Lines therefor (including riser Lines) are appropriately insulated to prevent such excessive electromagnetic fields or radiation (and such insulation shall not be provided by the use of additional unused twisted pair Lines). As a condition to permitting installation of new Lines, Landlord may require that Tenant remove any existing Lines located in or serving the Premises.
Construction Contract; Cost Budget Prior to execution of a construction contract, Tenant shal] submit a copy of the proposed contract with the Contractor for the construction of the Tenant Improvements, including the genera] conditions with Contractor (the “Contract”) to Landlord for its approval, which approval shall not be unreasonably withheld, conditioned or delayed. Following execution of the Contract and prior to commencement of construction, Tenant shall provide Landlord with a fully executed copy of the Contract for Landlord’s records. Prior to the commencement of the construction of the Tenant Improvements, and after Tenant has accepted all bids and proposals for the Tenant Improvements, Tenant shall provide Landlord with a detailed breakdown, by trade, for all of Tenant’s Agents, of the final estimated costs to be incurred or which have been incurred in connection with the design and construction of the Tenant Improvements to be performed by or at the direction of Tenant or the Contractor (the “Construction Budget”), which costs shall include, but not be limited to, the costs of the Architect’s and Engineers’ fees and the Landlord Coordination Fee. The amount, if any, by which the total costs set forth in the Construction Budget exceed the amount of the Tenant Improvement Allowance is referred to herein as the “Over Allowance Amount”. In the event that an Over-Allowance Amount exists, then prior to the commencement of construction of the Tenant Improvements, Tenant shall supply Landlord with cash in an amount equal to the Over- Allowance Amount. The Over-Allowance Amount shall be disbursed by Landlord prior to the disbursement of any of the then remaining portion of the Tenant Improvement Allowance, and such disbursement shall be pursuant to the same procedure as the Tenant Improvement Allowance. In the event that, after the total costs set forth in the Construction Budget have been delivered by Tenant to Landlord, the costs relating to the design and construction of the Tenant Improvements shall change, any additional costs for such design and construction in excess of the total costs set forth in the Construction Budget shall be added to the Over-Allowance Amount and the total costs set forth in the Construction Budget, and such additional costs shall be paid by Tenant to Landlord immediately as an addition to the Over-Allowance Amount or at Landlord’s option, Tenant shall make payments for such additional costs out of its own funds, but Tenant shall continue to provide Landlord with the documents described in items (1), (ii), (iii) and (iv) of Section 2.2.2.1 of this Tenant Work Letter, above, for Landlord’s approval, prior to Tenant paying such costs. All Tenant Improvements paid for by the Over-Allowance Amount shall be deemed Landlord’s property under the terms of the Lease. 4.2.2
Packing All Spare Parts ordered shall receive standard commercial packing suitable for export shipment via air freight. Such standard packing will generally be to ATA 300 standards as amended from time to time. All AOG orders will be handled, processed, packed and shipped separately.
Construction Budget Administrative Agent shall have received each of the Construction Budget in form and substance reasonably satisfactory to Administrative Agent (in consultation with the Independent Engineer).
Delivery Location The Aircraft shall be located at the agreed Delivery Location;
Construction of the Tenant Improvements Landlord shall construct the Tenant Improvements in accordance with this exhibit and the construction contract to be executed by Landlord and its contractor(s). The construction contract for constructing the Tenant Improvements and the contractor(s) to perform the work shall be approved and/or selected, as the case may be, by Landlord at its sole and absolute discretion without the consent of Tenant.
Maintenance Requirements The Sub-Adviser shall maintain such books and records with respect to the Allocated Portion as are required by law, including, without limitation, the 1940 Act (including, without limitation, the investment records and ledgers required by Rule 31a-1) and the Advisers Act, and the rules and regulations thereunder (the “Fund’s Books and Records”). The Sub-Adviser agrees that the Fund’s Books and Records are the Fund’s property and further agrees to surrender promptly to the Trust or the Adviser the Fund’s Books and Records upon the request of the Board or the Adviser; provided, however, that the Sub-Adviser may retain copies of the Fund’s Books and Records at its own cost. The Sub-Adviser shall make the Fund’s Books and Records available for inspection and use by the SEC and other regulatory authorities having authority over the Fund, the Trust, the Adviser or any person retained by the Board at all reasonable times. Where applicable, the Fund’s Books and Records shall be maintained by the Sub-Adviser for the periods and in the places required by Rule 31a-2 under the 1940 Act. In the event of the termination of this Agreement, the Fund’s Books and Records will be returned to the Trust or the Adviser. The Adviser and Fund’s Chief Compliance Officer shall, upon reasonable advance notice, be provided with access to the Sub-Adviser’s documentation and records relating to the Fund and copies of such documentation and records.
